分布式到达时间控制器装备维修任务实时调度方法

战时装备维修企业的生产环境呈现出更多的不确定性,合理安排维修任务来适应这种不确定性使实际修复时间与计划时间偏差最小是什么重要的.为此,提出了一种面向准时制造的实时生产调度方法,这种生产调度系统有多个独立的智能体,每个智能体通过到达时间控制器和仿真系统的反馈来调整对应维修任务的到达时间,然后通过先来先服务的调度规则确认维...     

单脉冲雷达仿真系统中回波的实现

单脉冲雷达仿真系统中,建立回波的数学模型是实现回波信号模拟的关键.在分析雷达回波相关特性的基础上,给出了回波的数学模型,并实现了逼真的雷达回波信号的模拟.     

前缘和转轴影响翼摇滚特性的数值模拟

采用耦合求解N-S方程和Euler刚体动力学方程的数值模拟方法研究80°后掠三角翼摇滚特性,讨论机翼前缘构型和滚转轴位置对三角翼摇滚特性的影响。N-S方程的离散采用Roe格式和含双时间步的LU-SGS方法,刚体动力学方程的离散采用二阶精度的差分方法,通过交替求解流动和运动控制方程组的耦合策略,模拟80°后掠三角翼自激摇滚的非定常过程。针对转轴安装于上表面的细长三角翼,研究前缘上削尖、下削尖和双面削尖三种构型的翼摇滚特性,分析前缘构型对摇滚振幅及分岔攻角的影响。考虑到上削尖和下削尖构型在翻转后相当于前缘构型互换但转轴位置不同,进一步考察了滚转轴位置对三角翼摇滚特性的影响。结果表明:在一定的攻角下,三种不同前缘构型的三角翼均能形成大幅自维持的摇滚现象,其中上削尖前缘的三角翼振幅最大,双面削尖前缘次之,下削尖前缘三角翼振幅最小;攻角增大到30°以后,双面削尖和上削尖前缘的三角翼会发生翻转现象,翻转180°以后维持等幅振荡。     

大功率IGBT器件及其组合多时间尺度动力学表征研究综述

在提出电力电子器件及其组合多时间尺度动力学表征需求的前提下,以目前常用的全控型电力电子器件——绝缘栅双极晶体管(Insulated Gate Bipolar Transistor,IGBT)为例,系统分析并归纳了目前在IGBT及其组合多时间尺度动力学表征研究方面的进展和成果,包括作为基础的大功率IGBT及其组合多时间尺度电热瞬态建模方法、基于模型的大功率IGBT模块失效量化表征方法以及用于辅助分析的IGBT组合多速率仿真方法。此外,介绍了基于IGBT多时间尺度模型的装置应用设计案例。从建模方法、可靠性评估、仿真手段以及应用设计四个方面系统全面地阐述了大功率IGBT及其组合多时间尺度的动力学表征方法,可为电力电子混杂系统的精确设计提供电力电子器件层面的理论和技术支撑。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

双离合器自动变速系统动力学建模及仿真研究

在分析双离合器自动变速器的典型结构及工作原理的基础上,利用面向对象的图形化系统仿真分析软件EASY5,建立了典型湿式双离合器动力换挡的自动变速器及其控制系统的动力学模型,并与采用传统的手动变速系统的车辆对比, 进行了加速性能的仿真分析,研究了车辆换挡过渡过程中影响换挡品质的主要因素及其改进措施。为这种新型的自动变速器在我国的推广和应用研究提供了一些基本的理论依据。     

基于虚拟样机技术的坦克扭力轴疲劳强度分析

采用虚拟样机技术,应用ADAMS软件中的ATV履带车辆工具箱、实体建模软件(SolidWorks)和有限元分析软件(Patran和Nastran),对柔性化的坦克悬挂系统扭力轴在动载荷工况下的疲劳强度进行了分析,找出了扭力轴的薄弱环节。     

深基坑预应力锚索支护对临近既有建筑影响的数值分析

通过利用Ansys有限元软件对某基坑的开挖过程进行数值模拟,对预应力锚索桩支护体系对既有建筑物基础的影响进行了分析,并且与锚索不施加预应力的情况进行了对比,得出了锚索施加预应力可以减小既有建筑物的地基两侧的变形差。但是锚索倾角太小或锚固段完全位于建筑下方,会降低锚索的预期效果,有可能导致建筑物开裂。所以应考虑锚索的倾角和锚固段的位置对建筑的影响。