杂散参数对串联型磁脉冲压缩器输出特性的影响

使用电路模拟软件分析了脉冲电容器自身电感、磁开关绕组匝间电容以及磁芯处于不同工作状态时磁开关绕组自身阻抗等杂散参数对串联型磁脉冲压缩器输出特性的影响。结果表明,匝间电容和磁芯处于未饱和状态下的绕组自身阻抗对系统的输出特性影响相对较小;磁芯处于饱和状态时,绕组自身阻抗对系统的电压传输效率影响较大;脉冲电容器的自身电感不仅会降低系统的电压传输效率,而且会同时影响到输出脉冲上升沿的宽度。基于以上结论,对基于电容负载的单级串联型磁脉冲压缩器进行了优化设计并研制了一台输出峰值电压26k V,脉冲上升时间由4.1ms压缩到1.2ms的串联型磁脉冲压缩器,电压传输效率大于92.5%。     

防空导弹指挥控制系统火力单元动态调整方法

多火力单元责任扇区的动态调整是防空导弹指挥控制系统的核心功能之一,通过引入可打击目标数和覆盖目标数的概念及计算方法,提出了一种新的多火力单元责任扇区调整方法。该方法能快速有效地确定多火力单元责任扇区调整方案。     

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum (Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed, and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction (diffusion and kinetic) between the Al powder and the detonation products; the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.     

Gliding arc plasma adjusting pre-combustion cracking products

In view of the difficulty of kerosene-air detonation faced by the application of rotating detonation to aviation engines, in order to improve the kerosene detonation activity, the atmospheric pressure gliding arc plasma is used to conduct secondary adjustment of the pre-combustion cracking products. The results show that the components with larger molecular weight in the pre-combustion cracking products, such as ethylene and methane, can be cracked into highly active species of hydrogen and acetylene by gliding arc plasma. With the increase of the fuel ratio of pre-combustion cracking, the plasma has a more significant effect on the adjustment of high active components. However, as the flow rate of the cracking gas treated by plasma increases, the adjustment effect is obviously reduced.     

非对称相互依赖下的美日军事同盟机制分析——以奥巴马政府“重返亚太”为视角

2012年1月5日,美国国防部发表了《保持美国的全球领导地位:21世纪的防务重点计划报告》,在"重返亚太"战略的战略背景下,重点针对美国未来的军事力量结构、全球部署态势、军事战略目标等进行了重新规划。新军事战略调整对整个国际格局和地区性大国产生深远影响。随着美国重返亚太的战略调整,军事上的相互依赖程度体现在美日同盟之间尤为突出。本文仅从军事战略角度,运用《权力与相互依赖》中部分理论对其调整下的美日军事同盟机制进行分析。     

姿态角单次调整的固体运载火箭耗尽关机能量管理方法

固体运载火箭传统耗尽关机制导方法姿态角调整次数过多,不利于控制系统设计。提出了姿态角单次调整的耗尽关机能量管理策略:以火箭的待增视速度方向为基准,通过计算火箭所需耗费的视速度,优化选取火箭的初、末姿态角;火箭以恒定角速率从初姿态角变为末姿态角,达到末姿态角时保持恒定,直至耗尽关机。仿真结果表明,新方法在满足火箭的终端速度约束条件下,视速度模量耗费百分比超过30%,且姿态角单向调整,有利于控制系统的工程设计。     

精密加工过程切削用量和表面粗糙度关系的模糊化处理方法

在金属切削原理中,用切削用量可以估计理论表面粗糙度。由于切削过程的复杂性,实际加工表面粗糙度和理论表面粗糙度有较大差距。本文采用模糊模式识别方法,对切削用量和表面粗糙度的关系进行了实验研究。本人介绍的理论方法、实现技术路线和实验结果,为以后开展ＦＭＳ或ＣＩＭＳ中智能化质量监控技术的进一步研究打下了基础。     

一种新型CVD铁涂层吸波纤维

利用Fe(CO)5受热分解,以CVD方法在SiC纤维表面涂覆单质铁的涂层。研究表明,涂层的引入对SiC纤维力学性能基本没有损伤;纤维依靠涂层导电,其电阻率显著降低;改变工艺条件,可以在较大范围内调节涂层纤维的介电常数,同时也引入了磁损耗机制;采用较低的沉积温度和较高的载气流速,可以提高介电常数和磁导率,同时有好的频散效应。     

基于因子分解和光束法平差从航空序列图像恢复三维结构

从航空序列图像恢复目标三维结构是航空摄影测量的基本问题。针对现有算法中精度与计算量的矛盾,提出一种基于因子分解与光束法平差的新算法。作为因子分解与光束法平差的桥梁,提出基于"R T"模式共线方程的概念,详细推导了其线性化公式。仿真实验和真实图像实验表明,新算法精度高、稳定性好,可应用于航空测绘、虚拟现实、军事侦察等工程实践。     

舰舰协同防空的舰空导弹杀伤区分析

针对舰艇编队协同防空时的耦合杀伤区形状及纵深等问题进行了研究,以定量地对编队耦合杀伤区进行简化描述。分析了单舰对典型目标的杀伤区特性,探讨了舰艇编队的典型防空队形,研究了纵向上递阶多层次、横向上同阶耦合的"递阶封闭圈原理"。以一阶耦合杀伤区为重点,依据攻击目标的不同,将其分成相对航路捷径为零和相对航路捷径均非零两类情况建立了耦合杀伤区纵深的计算模型,并扩展到了高阶耦合的情况。研究了耦合杀伤区与舰舰间距和来袭目标进攻舷角等参数的相互关系以及灵敏度。结果表明建立的模型符合实际,具有一定的指导意义。