Analysis and optimal design of discrete order picking technologies along a line

Order picking accounts for most of the operating expense of a typical distribution center, and thus is often considered the most critical function of a supply chain. In discrete order picking a single worker walks to pick all the items necessary to fulfill a single customer order. Discrete order picking is common not only because of its simplicity and reliability, but also because of its ability to pick orders quickly upon receipt, and thus is commonly used by e‐commerce operations. There are two primary ways to reduce the cost (walking distance required) of the order picking system. First is through the use of technology—conveyor systems and/or the ability to transmit order information to pickers via mobile units. Second is through the design—where best to locate depots (where workers receive pick lists and deposit completed orders) and how best to lay out the product. We build a stochastic model to compare three configurations of different technology requirements: single‐depot, dual‐depot, and no‐depot. For each configuration we explore the optimal design. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于CFP模型的装备系统能力开发方法

基于系统能力的装备系统开发能够使装备发展更好地适应未来战争。首先建立系统能力-功能-性能(简称CFP)概念模型,进一步定性分析系统能力与性能参数之间的映射关系。然后提出了在n维参数空间进行影射关系函数轨迹拟合的方法,定量地描述系统能力与性能参数之间的映射关系,建立CFP模型。最后以简例演示基于CFP模型进行定量系统能力开发的方法。     

临近空间拦截弹最优弹道跟踪制导律

针对拦截临近空间高超声速飞行器的弹道跟踪过程,基于线性二次型调节器理论和高斯伪谱法设计一种跟踪制导律。为了对标称弹道进行精确跟踪,考虑线性二次型跟踪问题,应用最优控制理论推导最优解的充要条件,得到带时变增益的线性状态反馈控制量的表达式;基于高斯伪谱法,在离散的勒让德-高斯点上利用标称弹道数据计算差分矩阵和系数矩阵,求得状态扰动反馈控制律。仿真结果表明,与基于求解矩阵黎卡提方程的方法相比,该方法选取较少的节点即可获得高精度的反馈控制量,且运算效率大幅提高,满足在线实施要求。     

基于线对线突然短路的同步电机瞬态参数辨识

准确地辨识同步电机参数,是分析电力系统运行和控制系统设计的前提.利用最小二乘或卡尔曼滤波等方法辨识电机三相同时突然短路试验数据,是传统电机参数辨识的主要方式.受同步电机三相同时突然短路的可操作性和电机参数模型的强非线性等因素的影响,电机瞬态参数难以准确测量.利用改进的小波变换和人工神经元网络辨识参数的新方法,结合容易实现的同步电机线对线突然短路试验,辨识得到了三相同步电机的瞬态参数,有效提高了电机参数的辨识精度.仿真试验表明,该方法是有效的.     

杂散参数对串联型磁脉冲压缩器输出特性影响*

使用电路模拟软件(P-Spice)分析了脉冲电容器自身电感、磁开关绕组匝间电容以及磁芯处于不同工作状态时,磁开关绕组自身阻抗等杂散参数对串联型磁脉冲压缩器输出特性的影响。结果表明,匝间电容和磁芯处于未饱和状态下的绕组自身电阻对系统的输出特性影响相对较小;磁芯处于饱和状态时,绕组自身阻抗对系统的电压传输效率影响较大;脉冲电容器的自身电感不仅会降低系统的电压传递效率,同时会影响到输出脉冲上升沿的宽度。基于以上的结论,对单级串联型磁脉冲压缩器进行了优化设计并研制了一台输出峰值电压26kV,脉冲上升时间由4.1us压缩到1.2us的串联型磁脉冲压缩器,电压传输效率大于92.5%。     

杂散参数对串联型磁脉冲压缩器输出特性的影响

使用电路模拟软件分析了脉冲电容器自身电感、磁开关绕组匝间电容以及磁芯处于不同工作状态时磁开关绕组自身阻抗等杂散参数对串联型磁脉冲压缩器输出特性的影响。结果表明,匝间电容和磁芯处于未饱和状态下的绕组自身阻抗对系统的输出特性影响相对较小;磁芯处于饱和状态时,绕组自身阻抗对系统的电压传输效率影响较大;脉冲电容器的自身电感不仅会降低系统的电压传输效率,而且会同时影响到输出脉冲上升沿的宽度。基于以上结论,对基于电容负载的单级串联型磁脉冲压缩器进行了优化设计并研制了一台输出峰值电压26k V,脉冲上升时间由4.1ms压缩到1.2ms的串联型磁脉冲压缩器,电压传输效率大于92.5%。     

搜索路径给定时的搜索对策问题及其应用

搜索路径给定时的最优搜索方案问题,也可以理解为是关于搜索者和目标的二人对策问题,主要讨论了当搜索路径给定时的单个搜索者和单个目标的搜索对策问题。首先根据问题的特点,利用动态规划和迭代的方法,确定关于目标逃逸路径混合策略的最优分区,证明该分区是多面体凸集;针对目标不同逃逸路径的分区,求出搜索者的最大期望收益,再将问题转化为二人有限零和对策,计算出搜索者的支付矩阵,确定最优搜索策略。最后结合海军护航行动,对我舰载直升机搜索小型海盗船进行分析和计算,说明搜索路径给定时的最优搜索对策对于双方的资源分配和提高搜索效率具有一定的应用价值。     

拦截弹中制导最优弹道簇生成

针对临近空间高超声速目标飞行速度快,跟踪预测难的特点,提出在中制导阶段进行最优弹道设计与弹道簇生成用于对目标预测命中区域进行有效覆盖的方法。通过分析临近空间高超声速目标对现有防空体系带来的挑战,阐明了在中制导段进行弹道簇设计与生成的必要性;将中制导段的弹道规划问题视为求解满足多种约束条件下的最优控制问题,应用最优化理论方法得到了基准的最优弹道;应用邻域最优控制理论,针对终端约束条件进行调整,设计了邻域最优弹道簇的生成算法。仿真验证了所提方法的有效性。     

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum (Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed, and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction (diffusion and kinetic) between the Al powder and the detonation products; the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.     

非相干背景光辐照二波耦合中的最佳匹配随机共振

针对非相干背景光辐照二波耦合中参数的最佳匹配设计问题,提出了一种基于随机共振理论的研究方法。首先,文章通过二波耦合过程进行物理机理分析和数值实验分析,证明了该问题在本质上可归结为一种随机共振现象。其次,从随机共振的角度,研究其中的最佳参数设计问题,给出了一种分布处理的最优参数设计流程。按照该方法,在给定增益要求的情况下,先根据信号光饱和与否来确定晶体长度,最后根据非相干光的比例对增益的影响来确定非相干光的比例。仿真实验表明,经过最佳参数设计后,信号的增益和输出信噪比上均有显著提高。