界面热阻对金刚石/银复合材料导热率的影响

研究了金刚石／银复合材料的导热率与金刚石的含量、粒度等之间的关系,着重讨论了界面热阻对复合材料导热率的影响。并阐述了金刚石表面镀钛,能有效改善金刚石对银的润湿性,降低界面热阻,从而提高金刚石／银复合材料的导热率。     

陶瓷/薄钢板复合结构靶板抗高速侵彻性能研究

为探讨陶瓷/薄钢板复合结构靶板(ceramic/thin steel targets,CS靶板)的抗高速侵彻机理,通过弹道试验,分析了3 mm厚SiC陶瓷层和0.6 mm厚钢板层的CS靶板的破坏模式和抗侵彻性能,并与面密度基本相同的纯钢板进行了比较。在此基础上,基于能量守恒原理,建立了CS靶板抗高速侵彻的理论预测模型,并与试验结果进行了对比。结果表明,CS靶板中前陶瓷层的存在,使得后钢板层的破坏模式由剪切冲塞转变为花瓣开裂,大大提升了后钢板层的抗侵彻吸能效率,从而使得CS靶板的整体抗侵彻性能高于等面密度的纯钢板,CS靶板的整体抗侵彻效率较等面密度纯钢板提升15%以上;弹体穿透CS靶板后的剩余速度理论预测值与试验结果吻合较好,相对误差均在5%以内,验证了理论模型的合理性和有效性。     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.     

横向效应增强型弹丸正侵穿金属薄靶轴向剩余速度近似计算与分析

运用冲击波理论,对横向效应增强型弹丸(Penetration with Enhanced Lateral Efficiency,PELE)侵穿金属靶板的机理进行了分析,将PELE侵彻过程中能量损失分为外壳撞击靶板区域环形塞块获得的能量,内芯撞击靶板区域塞块获得的能量,冲击波影响范围内外壳和内芯增加的内能,外壳前端外沿和内沿对靶板冲塞剪切耗能等几部分,给出了确定这些能量的计算方法;并依据能量守恒原理,给出了PELE正撞金属薄靶板靶后剩余速度的近似计算公式。公式计算结果与多种条件下实验结果均吻合较好。分析计算所得各能量损失结果表明,弹体内芯材料的变化对弹体侵彻能力的影响较小;侵彻中靶板塞块获得的能量在弹体侵彻动能损失中比重最大;外壳前端内沿对靶板的剪切能耗对弹体动能损失的影响可以忽略。     

电磁屏蔽模型房接地性能实验研究

接地是建筑物实现宽频电磁屏蔽的重要技术措施,而导电的屏蔽功能层与接地系统电连接后也反过来影响接地的性能指标。采用导电混凝土为主料制作接地电极和电磁屏蔽模型房,测试单屏蔽模型房悬空、单电极-单屏蔽模型房接地以及单电极-双屏蔽模型房并联接地3种情况下的接地电阻变化规律。实验发现,屏蔽功能层本身可以等效为一个电阻,与接地系统并联后可以有效降低接地电阻;屏蔽功能层面积越大,电阻降低越多。实验结果可以为建筑物电磁屏蔽工程的接地设计与实践提供参考。     

ADC模型的高空滑翔UUV作战效能分析

在简单介绍了高空滑翔UUV的概念及其工作过程的基础上,选用ADC模型对高空滑翔UUV的作战效能进行了分析。主要分析其可用度、可信度和能力矩阵的影响因素并建立了计算模型。在此基础上,对高空滑翔UUV的能力矩阵进行了分解并对成功发射概率、滑翔生存概率、低空突防生存概率、成功入水概率及水中击中目标概率等主要组成部分的影响因素进行了详细的分析。最后通过一个简单的算例验证了模型的可行性。     

几种排水型高性能船阻力性能对比研究

采用阻力理论计算方法,以高速圆舭艇的阻力性能为基准,对高速圆舭艇、深V型船、穿浪双体船以及高速三体船的阻力性能进行了对比研究,对比较结果进行了分析,给出了各船型的最适用航速范围.     

目标对抗条件下反舰导弹突防概率计算与分析

针对反舰导弹攻击水面舰艇的特点,在分析目标舰艇对反舰导弹发现概率的基础上,研究了目标舰艇采用各种手段对抗来袭导弹时对反舰导弹突防概率的影响。设计了分别适应冲淡干扰、转移干扰、质心干扰、对空导弹抗击和近程火炮抗击的一系列数学模型,并推导出突防概率的计算公式,仿真分析验证了所建立模型的正确性。该公式不仅考虑到了目标舰艇对来袭导弹的发现概率,而且顾及到了可能用到的所有对抗手段,比较符合实际情况,由此得出的结论对水面舰艇攻击战术有一定的参考价值。     

混凝土破障弹侵彻深度分析与计算方法

为了提高混凝土破障弹的威力,必须提高其侵彻深度。通过分析破障弹侵彻过程中各种阻力功及振动波耗能,提出了一种破障弹侵彻深度的计算方法,并结合制式弹丸进行了具体计算。     

我国钢结构耐火设计方法评述

分析并指出了我国现行钢结构耐火设计方法的缺点,建议采用性能化设计方法以提高钢结构耐火设计的可靠度。