BSC信道下线性分组码的差错概率下界分析

针对BSC信道,提出了一种线性分组码的最大似然译码差错概率下界的计算方法.根据最大似然译码算法原理,首先将译码差错概率转化为差错事件的联合概率,基于改进的Dawson-Sankoff界的优化准则,推导出BSC信道下线性分组码差错冗余事件的判决准则,最后得到差错概率下界的计算表达式.该下界只依赖于码字的Hamming重量...     

基于强跟踪扩展Kalman滤波的X射线脉冲星导航定轨精度研究

为提高X射线脉冲星导航定轨精度,依据脉冲星导航原理,建立了X射线脉冲星自主导航系统的状态方程和观测方程,提出用强跟踪扩展Kalman滤波（Strong Tracking Extended Kalman Filter,STEKF）替代扩展Kalman滤波,并对3颗脉冲星卫星运行的位置和速度估计进行了仿真实验。仿真结果表明：STEKF具有使滤波器能够自适应地校正估计偏差并迅速跟踪状态变化的能力,有效地提高了卫星运动状态的估计精度和数值稳定性。     

元器件性能退化信息的系统性能可靠性评估

性能可靠性方法为解决现代工程实际中的高可靠、长寿命、小子样产品的可靠性建模分析提供了途径.目前的性能可靠性研究主要是针对元器件开展的,对系统性能可靠性进行研究时通常需要将其看作一个元器件,需要得到系统的性能退化数据,在某些情况下,得到系统的性能退化数据比较困难.实际上,由于元器件的性能退化导致系统性能的变化,因而可以利...     

匈牙利法的末段两层火力反TBM目标分配优化

介绍了匈牙利法解决Assignment Problem的基本原理,对匈牙利法解决指派问题的解题步骤和特殊情况进行了说明。在给出末段两层火力防御TBM的目标分配原则的基础上,阐述了相关概念,改进了匈牙利法运用方式,并建立了目标分配模型。最后通过实例的解算,证明了该方法应用于末段两层火力防御TBM目标分配中的可行性,为末段协同反TBM的目标分配提供了一种有效的算法。     

信息熵与TOPSIS装备保障力量部署方案优化

针对装备保障力量部署方案复杂性和模糊性特点,在分析装备保障力量部署的内容、影响因素及方案优化目的基础上,建立了装备保障力量部署方案评估指标体系,采用信息熵理论来确定评估指标的权重,并提出了基于熵权TOPS IS的装备保障力量部署方案优选方法,使装备保障力量部署方案决策更加科学合理,具有一定的实用性。     

Using stochastic programming to solve an outpatient appointment scheduling problem with random service and arrival times

We study a stochastic outpatient appointment scheduling problem (SOASP) in which we need to design a schedule and an adaptive rescheduling (i.e., resequencing or declining) policy for a set of patients. Each patient has a known type and associated probability distributions of random service duration and random arrival time. Finding a provably optimal solution to this problem requires solving a multistage stochastic mixed‐integer program (MSMIP) with a schedule optimization problem solved at each stage, determining the optimal rescheduling policy over the various random service durations and arrival times. In recognition that this MSMIP is intractable, we first consider a two‐stage model (TSM) that relaxes the nonanticipativity constraints of MSMIP and so yields a lower bound. Second, we derive a set of valid inequalities to strengthen and improve the solvability of the TSM formulation. Third, we obtain an upper bound for the MSMIP by solving the TSM under the feasible (and easily implementable) appointment order (AO) policy, which requires that patients are served in the order of their scheduled appointments, independent of their actual arrival times. Fourth, we propose a Monte Carlo approach to evaluate the relative gap between the MSMIP upper and lower bounds. Finally, in a series of numerical experiments, we show that these two bounds are very close in a wide range of SOASP instances, demonstrating the near‐optimality of the AO policy. We also identify parameter settings that result in a large gap in between these two bounds. Accordingly, we propose an alternative policy based on neighbor‐swapping. We demonstrate that this alternative policy leads to a much tighter upper bound and significantly shrinks the gap.     

SpaceFibre网络服务质量时隙资源分配算法

为保证SpaceFibre星载数据网络大量实时数据流的超高速确定性传输,提出一种包含两个子算法的SpaceFibre网络服务质量时隙资源分配算法。形式化描述网络服务质量机制,给出调度矩阵相关定义;创建网络服务质量排队模型,定量分析时隙资源分配对网络时延性能的影响;考虑网络兼容性和算法鲁棒性,给出改进二进制序列调度子算法;采用提高初始种群进化程度和增加遗传算子等方法,给出改进混合单亲遗传调度子算法;利用Opnet网络仿真平台建立网络服务质量仿真模型,对比不同算法下网络时延性能。仿真结果表明,该时隙资源分配算法与其他算法相比,网络平均延时降低,网络性能得到显著改善,对构建低延时SpaceFibre网络具有参考意义。     

动初级高速六相直线感应电机工作特性分析

为了准确刻画对象模型,采用一阶等效电路瞬态涡流分析法对动态边端效应影响下动初级高速六相直线感应电机的参数时变规律进行了定量计算,并通过感应涡流损耗推导得到考虑动态边端效应时电机的等效电路。基于此,通过电磁推力计算及效率评估对动态边端效应影响下电机的工作特性进行了详细分析。利用不同运行速度条件下的有限元仿真及动态实验验证了理论分析和推导的正确性。     

重力势能锁止型外骨骼设计及其效能评价

现存的被动式外骨骼存在助力效果不明显等缺陷。基于人体步态特征,提出了将人体行走过程中的重力势能转化为人体抬腿过程中动能的原理,通过弹簧、曲柄滑块机构、棘轮棘爪机构以及链传动机构的组合,设计了一款被动式下肢机械外骨骼,并通过外骨骼动力学分析和生理消耗指数实验测试的方法进行了外骨骼性能评价。动力学分析结果表明,穿戴外骨骼后髋关节峰力矩总量降低了23.43%,髋关节做功总量降低了30.59%,初步验证了外骨骼的有效性。生理消耗指数实验测试结果表明, 穿戴外骨骼对于短距离动作转换未产生显著效果,但在长距离行走和上坡行走中分别降低了8.1%和10.4%的能量消耗。因此,该下肢外骨骼助力性能得到了验证,为相关领域的研究提供了实例化参考。     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.