侵入和不变流型的坦克炮控伺服系统研究

针对坦克炮控系统未知齿隙及摩擦,设计了基于性能的新型控制器.提出了基于侵入和不变流型(I&I)的未知参数估计率的构造方法,使调节函数的选取及I&I估计率的设计变得直接简便.由于未知齿隙及摩擦被充分的描述成有界扰动与非线性动态项的组合,从而避免了将其简单的考虑成“总扰动”所造成的被控系统性能的损失.该控制器可有效抑制负载扰动及参数变化所带来的影响.同时通过快速准确的估计系统参数实现了对指令信号快速精确的跟踪.     

Effect of fusion welding processes on tensile properties of armor grade,high thickness,non-heat treatable aluminium alloy joints

AA5059 is one of the high strength armor grade aluminium alloy that finds its applications in the military vehicles due to the higher resistance against the armor piercing (AP) threats. This study aimed at finding the best suitable process among the fusion welding processes such as gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) by evaluating the tensile properties of AA5059 aluminium alloy joints. The fracture path was identified by mapping the low hardness distribution profile (LHDP) across the weld cross section under tensile loading. Optical and scanning electron microscopies were used to characterize the microstructural features of the welded joints at various zones. It is evident from the results that GTAW joints showed superior tensile properties compared to GMAW joints and this is primarily owing to the presence of finer grains in the weld metal zone (WMZ) and narrow heat-affected zone (HAZ). The lower heat input associated with the GTAW process effectively reduced the size of the WMZ and HAZ compared to GMAW process. Lower heat input of GTAW process results in faster cooling rate which hinders the grain growth and reduces the evaporation of magnesium in weld metal compared to GMAW joints. The fracture surface of GTAW joint consists of more dimples than GMAW joints which is an indication that the GTAW joint possess improved ductility than GMAW joint.     

钢焊丝脉冲GMA焊最佳熔滴过渡形式的参数模型

基于磁流体微扰动“失稳”的原理,建立了钢焊丝脉冲GMA焊最佳熔滴过渡形式的参数模型。通过试验对比,验证了该模型的工程实用性。     

便携式地空导弹野外训练系统技术研究

针对便携式地空导弹野外模拟训练器材普遍存在的问题,介绍了自行研制的新型便携式地空导弹野外训练。该系统充分利用对空指挥镜和精确运动定位器的测角特性,采用插值算法预测了目标航路,成功地解决了野外训练时缺少目标航路的问题,较好地纠正了野外训练时人为设定目标参数的弊病,满足了部队对野外训练系统的实际需求,对从事便携式地空导弹野外模拟训练器材的设计和论证工作也有一定参考意义。     

摩擦电喷镀Ni-Co-MoS2复合镀层摩擦学性能研究

采用摩擦电喷镀技术制备Ni-Co-MoS2复合镀层,系统试验研究了复合镀层的摩擦学性能。结果表明,Ni-Co-MoS2复合镀层在滑动摩擦条件下,摩擦因数主要取决于镀层中MoS2微粒的含量、滑动速度和载荷;MoS2微粒的减磨作用,可有效改善镀层的耐磨性;在滑动摩擦条件下,Ni-Co-MoS2复合镀层的耐磨性能将随MoS2含量的提高而提高。     

图像识别技术在射线探伤中的应用

针对焊缝射线探伤中的缺陷评片问题,利用数字成像及图像识别技术,对射线探伤底片进行了计算机自动识剐技术的研究,并以此为基础,对典型缺陷进行了识别.结果显示,利用此技术能够提高和改进评片的质量及效率.     

Driving force coordinated control of an 8 ×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Because of the complexities of tire-road interaction,the wheels of a multi-wheel distributed electric drive vehicle can easily slip under certain working conditions.As wheel slip affects the dynamic per-formance and stability of the vehicle,it is crucial to control it and coordinate the driving force.With this aim,this paper presents a driving force coordination control strategy with road identification for eight-wheeled electric vehicles equipped with an in-wheel motor for each wheel.In the proposed control strategy,the road identification module estimates tire-road forces using an unscented Kalman filter al-gorithm and recognizes the road adhesion coefficient by employing the recursive least-square method.According to road identification,the optimal slip ratio under the current driving condition is obtained,and a controller based on sliding mode control with a conditional integrator uses this value for accel-eration slip regulation.The anti-slip controller obtains the adjusting torque,which is integrated with the driver-command-based feedforward control torque to implement driving force coordination control.The results of hardware-in-loop simulation show that this control strategy can accurately estimate tire-road forces as well as the friction coefficient,and thus,can effectively fulfill the purpose of driving force coordinated control under different driving conditions.     

疏水性纳米TiO2制备及其在菜籽油中的摩擦磨损性能

以纳米TiO2为原料、硬脂酸为表面改性剂,通过超声反应制备了疏水性纳米TiO2（SA-TiO2）;采用扫描电子显微镜（SEM）、红外光谱仪及接触角测量仪对其微结构进行了表征。以SA-TiO2为润滑油添加剂,在四球试验机上考察了其在菜籽油中的摩擦磨损性能,并利用SEM观察钢球表面磨斑形貌,用能谱仪（EDS）和X射线光电子能谱仪（XPS）分析了钢球表面磨斑的化学成分。结果表明：SA-TiO2为疏水性单分散球状颗粒,其平均直径约为20 nm;SA-TiO2能够提高菜籽油的抗磨减摩性能,当SA-TiO2的质量分数为1%,菜籽油的抗磨减摩性能达到最佳;钢球表面磨斑的EDS和XPS分析表明,纳米微粒在钢球摩擦表面形成了一层含菜籽油和SA-TiO2的吸附膜,在摩擦剪切作用下,发生摩擦化学反应生成了一层含钛、铁氧化物的边界润滑膜,这种边界润滑膜起到了良好的润滑作用。     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.     

Feasibility of surface-coated friction stir welding tools to join AISI 304 grade austenitic stainless steel

An attempt is made to develop the tools that are capable enough to withstand the shear, impact and thermal forces that occur during friction stir welding of stainless steels. The atmospheric plasma spray and plasma transferred arc hardfacing processes are employed to deposit refractory ceramic based composite coatings on the Inconel 738 alloy. Five different combinations of self-fluxing alloy powder and 60% ceramic reinforcement particulate mixtures are used for coating. The best friction stir welding tool selected based on tool wear analysis is used to fabricate the austenitic stainless steel joints.