排序方式： 共有93条查询结果，搜索用时 15 毫秒
91.
《防务技术》2020,16(2):381-391
This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiCp-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure. 相似文献
92.
为了使转管炮机心组消耗的驱动功率最小,对机心组速度、主滚轮相对机体位置、机心体左右导轨及倾角关系等对驱动功率的影响进行研究。表明最好选用机心组凸轮加速度最小,主滚轮相对机体质心位置等于零,最好用无横向位移以及有夹角的关系最好。优化结果表明:9 000 rpm的射速,驱动功率由机心组加速度变化引起140kw下降到31 kw,降到不足于原设计曲线的22%;射速为3 300 rpm的主滚轮压力峰值参数化峰值1 086.5 N,升高到10 000 rpm的峰值9 779.3 N。无横向以及有夹角降低压力有横向以及无夹角90.9%。 相似文献
93.
建立一类空气标准Dual循环的不可逆模型 ,考虑压缩过程和做功冲程的有限时间特性和循环的摩擦损失对其性能的影响 ,推导出功率、效率与压缩比关系的解析式 .结合数值算例 ,所得的功率效率曲线与实际热机特性相同 相似文献