离子束加工误差对散射损失的影响研究

离子束加工(Ion Beam Figuring,IBF)去除函数对加工残差具有重要的影响,而加工残差引起的表面散射则导致光学性能发生变化.为了减小加工残差对光学性能的影响,利用基于CCOS成形原理的离子束加工仿真程序对光学镜面进行修形,分析不同去除函数宽度对散射损失(Ratio of Scattering Loss,RSL)指标的影响.通过研究可知,随着去除函数宽度的减小,加工残差对散射损失的影响越来越小.因此,根据加工残差对RSL指标的影响程度以及RSL指标要求,可以合理选择去除函数宽度,从而在满足面形精度的同时,优化加工工艺.     

空对地导弹的变结构三维导引律(英文)

推导了空对地导弹的三维导引律模型,并设计了针对机动目标的变结构导引律,分析了其制导特性.设计的导引律由于需要的目标信息少,可以便利地应用于实际工程中,数字仿真结果证实了设计的导引律的可行性.     

Consecutive k‐within‐m‐out‐of‐n:F system with exchangeable components

As a generalization of k‐out‐of‐n:F and consecutive k‐out‐of‐n:F systems, the consecutive k‐within‐m‐out‐of‐n:F system consists of n linearly ordered components such that the system fails iff there are m consecutive components which include among them at least k failed components. In this article, the reliability properties of consecutive k‐within‐m‐out‐of‐n:F systems with exchangeable components are studied. The bounds and approximations for the survival function are provided. A Monte Carlo estimator of system signature is obtained and used to approximate survival function. The results are illustrated and numerics are provided for an exchangeable multivariate Pareto distribution. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

接收机前端放大链与数字模块接口匹配分析

探讨了雷达数字化接收系统前端放大链与数字A/D模块级联后,接收系统的噪声系数、灵敏度和瞬时动态范围等参数的变化;研究了在工程上接收系统为获得最佳性能,前端放大链与数字A/D模块性能指标的折衷问题,推导了相应的设计公式并给出了实验验证.最后总结了在接收系统前端和A/D性能允许范围内,获得设计师希望得到的接收系统灵敏度和动态范围的方法及设计参考曲线.     

基于数字信道化的极微弱信号载波频率引导模块设计与实现

针对深空探测中常规点数的FFT无法对极微弱信号进行精确的频率引导,而超长点数的FFT无法用现有器件实现,提出一种基于数字信道化的并行FFT频率引导方法.接收信号先经过数字信道化处理,均匀划分为若干窄带信号,然后分别对各子带信号进行FFT运算,最后通过对各子带有效谱线的联合检测完成载波频率的精确估计.在等效219点FFT的频率引导模块FPGA实现中,通过FFT模块的复用节约了硬件资源开销.测试结果表明:在8MHz采样率下该模块的测频精度小于10Hz.     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

空间矢量脉宽调制的研究

对空间矢量脉宽调制(SVPWM)的理论进行了较详细的讨论.利用DSP电机控制器TMS320F240实现SVPWM,分析了该方法的特点,并给出了相应的实验结果.     

自适应逆控制FXLMS算法有源噪声控制仿真研究

前馈有源噪声控制方法可在较宽的频带有效,使之获得了广泛的应用.在前馈有源噪声控制中,直接使用传统的FXLMS算法时,由于次级通道传递函数往往是非最小相位系统,导致系统的性能下降.文中提出一种基于非最小相位系统逆控制的自适应前馈有源噪声控制FXLMS算法,用带宽随机噪声信号和实测风机通风管道噪声信号进行仿真实验研究,结果表明,较传统的FXLMS算法有明显的改进.     

喷水推进装置及其在舰艇上的应用

船舶喷水推进装置具有推进效率高、噪音小、操作性能好以及适合浅水航行等特点,其军事价值将越来越受到世界各国海军的重视.分析了喷水推进装置的优、缺点,简要介绍了其基本原理和结构,并总结了其在潜艇和水面舰艇上的应用,对其今后的应用与发展趋势作了简要分析.     

斜入射条件下F-P干涉腔透过率特性分析

分析了斜入射角条件下F-P干涉腔的透过率特性;结合单层介质膜和单层金属膜的反射特性随入射角的变化规律,得出了反射特性参数为恒定值时微腔、低反F-P干涉腔透过率的计算误差;仿真结果表明,在光束斜入射条件下,特别是在大入射角下,单层介质膜的反射率指数增大,单层金属膜的反射率和反射相移也指数增大,但其吸收系数指数减小,造成微腔、低反F-P干涉腔透过率曲线与反射特性参数为恒定值时相比均明显向下偏移,且偏移量逐渐增大。