卧式储油罐罐体变位模型与罐容表标定

针对储油罐罐体变位影响油品计量精度的问题,建立了球冠形封头卧式储油罐罐体变位模型,将罐体变位后的油位高度转换成无变位时的油位高度,再利用罐体无变位时的储油体积计算模型得到变位后储油体积与油位高度的关系。分析了罐体变位对罐容表的影响,提出了一种基于最小二乘原理的变位参数识别算法,最后对该变位模型进行了检验,并采用插值算法重新标定了变位后的罐容表。结果表明:该变位模型与实际情况基本相符,变位参数识别算法能估计出罐体倾斜角度和偏转角度。     

Pressure relief of underground ammunition storage under missile accidental ignition

Safety of underground ammunition storage is an important issue, especially during the accidental ignition of missiles. This work investigates the pressure and temperature distribution of the multi-layer underground ammunition storage with a pressure relief duct during the accidental ignition process of the missile. A large-scale experiment was carried out using a multi-layered restricted space with a pressure relief duct to simulate the underground ammunition store and a solid rocket motor to simulate the accidental ignition of the missile. The results show that when the motor gas mass flow increased by 5.6 times, the maximum pressure of the ammunition storage increased by 5.87 times. At a certain motor flow rate, when the pressure relief exhaust area at the end of the relief duct was reduced by 1/2, the maximum pressure on the first layer did not change. But the rate of pressure relief was reduced and the time delayed for the pressure of ammunition store to drop to zero. In this experiment, when the motor ignition position was located in to the third layer ammunition chamber, the maximum pressure was reduced by 32.9％ and also reduced the rate of change of pressure. In addition, for the experimental conditions, the theoretical analysis of the pressure relief of the ammunition storage is given by a simplified model. Based on the findings, some suggestions to the safety protection design of ammunition store are proposed.     

A nonparametric approach to accelerated life testing under multiple stresses

Accelerated life testing (ALT) is concerned with subjecting items to a series of stresses at several levels higher than those experienced under normal conditions so as to obtain the lifetime distribution of items under normal levels. A parametric approach to this problem requires two assumptions. First, the lifetime of an item is assumed to have the same distribution under all stress levels, that is, a change of stress level does not change the shape of the life distribution but changes only its scale. Second, a functional relationship is assumed between the parameters of the life distribution and the accelerating stresses. A nonparametric approach, on the other hand, assumes a functional relationship between the life distribution functions at the accelerated and nonaccelerated stress levels without making any assumptions on the forms of the distribution functions. In this paper, we treat the problem nonparametrically. In particular, we extend the methods of Shaked, Zimmer, and Ball [7] and Strelec and Viertl [8] and develop a nonparametric estimation procedure for a version of the generalized Arrhenius model with two stress variables assuming a linear acceleration function. We obtain consistent estimates as well as confidence intervals of the parameters of the life distribution under normal stress level and compare our nonparametric method with parametric methods assuming exponential, Weibull and lognormal life distributions using both real life and simulated data. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 629–644, 1998     

狭长受限空间火灾临界可燃距离实验研究

油料洞库的安全一直是各级主管部门非常关心的问题。狭长受限空间是地下建筑及地下油料洞库的关键结构,针对狭长受限空间发生火灾能否持续燃烧问题,在公称直径分别为50mm、100mm、150mm和250mm的模拟狭长受限空间上,以柴油作为燃烧工质,置于尺寸、形状各异的3种油盘中,进行了系统实验研究与分析,证实了狭长受限空间临界可燃距离的存在,并在此基础上,提出了计算方法,得出一些有益的结论,对研究油料洞库消防新技术有一定的价值。     

火炮身管寿命分析与计算

分析了射击时弹丸挤进过程 ,建立了弹丸初速下降量与炮膛内膛磨损量计算模型 ,并以某火炮为实例计算了该炮弹丸初速下降量与炮膛内膛磨损量之间变化关系 ,分析了弹道峰现象 ,为身管寿命预测提供理论依据     

Estimating distribution functions from partially observed samples

Suppose that some components are initially operated in a certain condition and then switched to operating in a different condition. Working hours of the components in condition 1 and condition 2 are respectively observed. Of interest is the lifetime distribution F of the component in the second condition only, i.e., the distribution without the prior exposure to the first condition. In this paper, we propose a method to transform the lifetime obtained in condition 1 to an equivalent lifetime in condition 2 and then use the transformed data to estimate F. Both parametric and nonparametric approaches each with complete and censored data are discussed. Numerical studies are presented to investigate the performance of the method. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 521–530, 2000     

长期贮存的固体发动机药柱脱粘界面裂纹分析

为了分析长期贮存的固体导弹发动机药柱脱粘层界面裂纹在燃气内压和轴向过载联合作用下的扩展情况,建立了发动机药柱在包覆层与推进剂之间脱粘的三维有限元计算模型,并于脱粘界面的裂纹尖端设置三维奇异裂纹元,模拟脱粘界面裂纹扩展。在包覆层与推进剂之间设置不同深度脱粘,计算了在燃气内压和轴向过载联合作用下不同贮存期、不同深度的界面裂纹尖端的应力强度因子,得到了界面裂纹应力强度因子随贮存时间、脱粘深度的变化规律,对长期贮存的固体发动机脱粘界面裂纹的扩展进行了分析。     

软件保障性评估在维修性分配和预计软件中的应用

从软件保障性的影响要素——软件生命周期过程、软件自身的设计特性和保障资源出发，阐明了软件保障性评估的原理，提出了一套软件保障性评估方案。通过在某维修性分配和预计软件上的具体实践，充分验证了该评估方案的可行性和实用性。     

关注个体生命成长的公共教育学——基于教学实践的反思

关注个体生命成长的教育学是相对关注完整学科体系的公共教育学提出的。关注个体生命成长的教育学意味着回归教育学本原，从教育学原点出发，重新思考公共教育学身处当前尴尬处境的原因，并从价值取向、课程目标、教学方法、师生关系四个方面思考公共教育学走出困境的可能思路。     

吐鲁番屏式壁画所见唐人的精神生活

吐鲁番阿斯塔那三座唐墓中发现了三幅屏式壁画,其构图模拟了唐人生活中习用的六扇屏风式样,由此可以探究那个时代生活于西州(今吐鲁番)的唐人的精神追求.