钝体高超声速气动加热与结构热传递耦合的数值计算

气动加热与结构热传递耦合问题在航天和工程应用领域非常重要。分别采用松耦合与紧耦合方法,数值模拟了高超声速二维圆管绕流的流场与结构传热耦合的非定常过程。在紧耦合方法中,流场部分采用基于Navier Stokes方程的有限体积法,将AUSM+格式与时间方向的显式多步Runge Kutta法结合;结构传热部分采用基于二维热传导方程的Galerkin有限元法。流场与结构区通过交界面的热流和温度边界条件实现耦合。计算结果分别与实验、文献做了对比,结构内部温度变化关系以及壁面的热流分布均较好地吻合。两种耦合方式的计算结果对比表明,对于流场特征时间远小于结构传热特征时间的问题,松耦合方法计算效率高,精度与紧耦合方法接近。     

采用随机矩阵理论的水声阵列SMI-MVDR空间谱估计技术

对角加载MVDR技术是一种经典的空间谱估计技术,在水声阵列信号处理中有着广泛的应用。该技术之所以具有较好的性能是由于其通过对角加载使样本协方差矩阵的特征值分散度减小。提出了基于随机矩阵理论的MVDR空间谱估计技术,具体思路是利用随机矩阵特征值的极限性质实现样本协方差矩阵噪声的抑制,以达到类似对角加载能够实现的特征值分散度减小的效果。仿真表明所提出的方法与对角加载方法达到了同样的目的,且当快拍数一定,而信噪比由小变大时,该方法可以达到与对角加载MVDR技术相当的性能;当信噪比设为定值,快拍数由小变大时,其与对角加载技术具有相同的DOA估计成功概率变化趋势,且在小样本情况下,此方法优势较为明显。     

EU Battlegroups: High costs,no benefits

This article reviews the gloomy saga of the EU Battlegroups, focusing on four questions: Where do they come from? What do they look like? What have they been hindered by? And where do they go from here? It builds upon earlier findings in the literature and adds novel insights based on original data. In doing so, the article pays particular attention to the standby nations’ constant calculation of political and financial costs. It argues that recognizing these cost–benefit calculations allows for identifying the most crucial areas to be tackled to make the EU Battlegroups functional. In addition, the article stresses that these considerations play out in a setting wherein the Battlegroups are just one among many policy instruments available for rapid response.     

基于神经网络和模糊综合评判的梁故障诊断研究

设计了一个简单的人工智能故障诊断系统模型,它包括知识库、模糊推理、神经网络和控制模块等。模糊推理模块利用模糊综合评判方法进行故障的预诊,神经网络模块采用竞争学习方法完成故障的确诊。文中对悬臂梁的单一故障和复合故障等七种模式进行了诊断分析,均获得了正确的诊断结果。     

载流管道在基础振动下的振动控制

根据舰船管道的实际情况 ,在载流管系的动态响应分析中引入基础振动的影响 .计算分析了舰船管道系统在流体激励、外部干扰力和基础振动情况下的动态响应 .研究了如何减小基础振动对管路系统振动的影响 ,通过计算分析 ,提出了比较有效的减振措施 .     

面阵CCD非线性响应的测量

针对CCD测量技术中出现的非线性问题 ,提出了以光电池为标定基准的CCD非线性测试以及非线性标定方法。通过实际测试的实验数据 ,详细说明了如何利用测得的数据进行CCD非线性标定。该方法简单易行、有较高的精度和一定的科研参考价值。     

舰炮身管的模态分析与多目标优化

舰炮的炮口扰动是影响舰炮射击精度的重要因素。为了减少舰炮的炮口扰动,优化身管结构,建立了柔性身管的ABAQUS有限元模型,将有限元模型的模态计算值与模态试验值进行比较,发现建立的柔性身管有限元模型是合理可行的。提出了混沌量子粒子群算法与动力学联合优化的方法,进行身管和炮口的多目标优化。优化结果表明,优化后炮口中心的线速度、角速度和角位移与优化前相比显著减小,身管质量有所降低,结构更加合理,该优化方法有效可行,为下一步全炮总体优化设计提供了一定的借鉴。     

Stochastic production capacity: A bane or a boon for quick response supply chains?

The quick response (QR) system that can cope with demand volatility by shortening lead time has been well studied in the literature. Much of the existing literature assumes implicitly or explicitly that the manufacturers under QR can always meet the demand because the production capacity is always sufficient. However, when the order comes with a short lead time under QR, availability of the manufacturer's production capacity is not guaranteed. This motivates us to explore QR in supply chains with stochastic production capacity. Specifically, we study QR in a two-echelon supply chain with Bayesian demand information updating. We consider the situation where the manufacturer's production capacity under QR is uncertain. We first explore how stochastic production capacity affects supply chain decisions and QR implementation. We then incorporate the manufacturer's ability to expand capacity into the model. We explore how the manufacturer determines the optimal capacity expansion decision, and the value of such an ability to the supply chain and its agents. Finally, we extend the model to the two-stage two-ordering case and derive the optimal ordering policy by dynamic programming. We compare the single-ordering and two-ordering cases to generate additional managerial insights about how ordering flexibility affects QR when production capacity is stochastic. We also explore the transparent supply chain and find that our main results still hold.     

Study on dynamic response of multi-degree-of-freedom explosion vessel system under impact load

In order to study the dynamic response and calculate the axial dynamic coefficient of the monolayer cylindrical explosion vessel, the wall of vessel is simplified as a multi-degree-of-freedom (MDoF) undamped elastic foundation beam. Decoupling the coupled motion equation and using Duhamel's integrals, the solutions in generalized coordinates of the equations under exponentially decaying loads, square wave loads and triangular wave loads are calculated. These solutions are consistent in form with the solutions of single-degree-of-freedom (SDoF) undamped forced vibration simplified model. Based on the model, equivalent MDoF design method (also called MDoF dynamic coefficient method) of cylindrical explosion vessel is proposed. The traditional method can only predict the dynamic coefficient of torus portion around the explosion center, but this method can predict that of the vessel wall at any axial n dividing point position. It is verified that the prediction accuracy of this model is greatly improved compared with the SDoF model by comparing the results of this model with SDoF model and numerical simulation in different working conditions. However, the prediction accuracy decreases as the scaled distance decreases and approaches the end of the vessel, which is related to the accuracy of the empirical formula of the implosion load, the simplification of the explosion load direction, the boundary conditions, and the loading time difference.     

Dynamic modeling and parameter identification of a gun saddle ring

In this study, a theoretical nonlinear dynamic model was established for a saddle ring based on a dynamic force analysis of the launching process and the structure according to contact-impact theory. The ADAMS software was used to build a parameterized dynamic model of the saddle ring. A parameter identification method for the ring was proposed based on the particle swarm optimization algorithm. A loading test was designed and performed several times at different elevation angles. The response histories of the saddle ring with different loads were then obtained. The parameters of the saddle ring dynamic model were identified from statistics generated at a 50° elevation angle to verify the feasibility and accuracy of the proposed method. The actual loading history of the ring at a 70° elevation angle was taken as the model input. The response histories of the ring under these working conditions were obtained through a simulation. The simulation results agreed with the actual response. Thus, the effectiveness and applicability of the proposed dynamic model were verified, and it provides an effective method for modeling saddle rings.