局部火灾场钢框架结构等效楼面活荷载分析

通过对火灾场钢结构框架梁极限抗弯、抗剪承载力的分析,提出采用等效楼面活荷载来描述火灾场对结构极限承载力的削弱,建立了火灾场等效楼面活荷载的计算公式,通过具体算例分析了厚涂型不同保护层厚度的框架钢梁极限抗弯、抗剪承载力及等效楼面活荷载的变化规律。分析结果表明,采用等效楼面活荷载可以直观地描述火灾场对结构构件极限承载能力的削弱,使火灾场钢结构受力分析变得简单、清晰。     

火场中A3钢的晶粒度与燃烧时间和温度关系的研究

本文模拟典型火灾温度－时间曲线,对热轧成的Ａ３钢进行受热处理,测定在不同燃烧时间和温度下Ａ３钢的晶粒度,给出了Ａ３钢的晶粒度与燃烧时问和温度之间的定量关系,提出了通过测定Ａ３钢晶粒度的大小来鉴定火场中不同部位的燃烧时间和温度的科学方法     

深圳星河世纪结构方案优选

高楼结构设计,包含结构方案选定、构件内力计算、杆件和节点构造措施等三 部分内容。工程实践经验表明,高楼结构设计能否做到安全、经济、合理,关键在于选定的结 构方案是否恰当。围绕结构方案优化这一主题,探讨了以深圳星河世纪A栋办公楼为例, 就其有关的安全、经济、合理各方面进行系统的阐述,以供同类建筑在确定结构方案时参考。     

新型防火板材包覆保护钢结构方法探讨

新型防火板材是钢结构防火技术新的发展方向，结合钢结构防火保护技术的发展与现状，对GF防火板（1100℃级轻质无石棉硅酸钙防火板）、高温耐火胶粘剂以及用GF防火板保护钢结构的方法进行了深入的研究，并与目前大量使用的钢结构防火涂料作对比，探讨了新型防火板材在技术性能和工程施工方面的优势。     

大空间钢结构建筑消防安全评估研究

大空间钢结构建筑发生火灾时,火焰及火灾产生的高温羽流可能对钢构件构成一定威胁。采用经验公式计算和FDS模拟分析两种方法计算火灾环境中大空间建筑钢构件的温度,评估钢构件是否达到或超过其失效温度。     

Modeling and solution for the ship stowage planning problem of coils in the steel industry

We consider a ship stowage planning problem where steel coils with known destination ports are to be loaded onto a ship. The coils are to be stowed on the ship in rows. Due to their heavy weight and cylindrical shape, coils can be stowed in at most two levels. Different from stowage problems in previous studies, in this problem there are no fixed positions on the ship for the coils due to their different sizes. At a destination port, if a coil to be unloaded is not at a top position, those blocking it need to be shuffled. In addition, the stability of ship has to be maintained after unloading at each destination port. The objective for the stowage planning problem is to minimize a combination of ship instability throughout the entire voyage, the shuffles needed for unloading at the destination ports, and the dispersion of coils to be unloaded at the same destination port. We formulate the problem as a novel mixed integer linear programming model. Several valid inequalities are derived to help reducing solution time. A tabu search (TS) algorithm is developed for the problem with the initial solution generated using a construction heuristic. To evaluate the proposed TS algorithm, numerical experiments are carried out on problem instances of three different scales by comparing it with a model‐based decomposition heuristic, the classic TS algorithm, the particle swarm optimization algorithm, and the manual method used in practice. The results show that for small problems, the proposed algorithm can generate optimal solutions. For medium and large practical problems, the proposed algorithm outperforms other methods. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 564–581, 2015     

串联式反后坐装置设计与动力学仿真

利用Runge-Kutta方法确定了火炮串联式后坐系统的参数,设计出串联式反后坐装置结构,并运用ADAMS软件进行了串联式后坐系统动力学仿真,以验证设计结果的准确性。动力学仿真结果与结构设计的参数比较吻合,证明了结构设计结果的准确性,通过串联式后坐系统与单一后坐系统的对比,反映了串联式后坐系统的优越性。     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.     

Feasibility of surface-coated friction stir welding tools to join AISI 304 grade austenitic stainless steel

An attempt is made to develop the tools that are capable enough to withstand the shear, impact and thermal forces that occur during friction stir welding of stainless steels. The atmospheric plasma spray and plasma transferred arc hardfacing processes are employed to deposit refractory ceramic based composite coatings on the Inconel 738 alloy. Five different combinations of self-fluxing alloy powder and 60% ceramic reinforcement particulate mixtures are used for coating. The best friction stir welding tool selected based on tool wear analysis is used to fabricate the austenitic stainless steel joints.     

Effect of welding processes and consumables on fatigue crack growth behaviour of armour grade quenched and tempered steel joints

Quenched and Tempered (Q&T) steels are widely used in the construction of military vehicles due to its high strength to weight ratio and high hardness. These steels are prone to hydrogen induced cracking (HIC) in the heat affected zone (HAZ) after welding. The use of austenitic stainless steel (ASS) consumables to weld the above steel was the only available remedy because of higher solubility for hydrogen in austenitic phase. The use of stainless steel consumables for a non-stainless steel base metal is not economical. Hence, alternate consumables for welding Q&T steels and their vulnerability to HIC need to be explored. Recent studies proved that low hydrogen ferritic steel (LHF) consumables can be used to weld Q&T steels, which can give very low hydrogen levels in the weld deposits. The use of ASS and LHF consumables will lead to distinct microstructures in their respective welds. This microstructural heterogeneity will have a drastic influence in the fatigue crack growth resistance of armour grade Q&T steel welds. Hence, in this investigation an attempt has been made to study the influence of welding consumables and welding processes on fatigue crack growth behaviour of armour grade Q&T Steel joints. Shielded metal arc welding (SMAW) and Flux cored arc welding (FCAW) were used for fabrication of joints using ASS and LHF consumables. The joints fabricated by SMAW process using LHF consumable exhibited superior fatigue crack growth resistance than all other joints.