Size dependent free vibration analysis of functionally graded piezoelectric micro/nano shell based on modified couple stress theory with considering thickness stretching effect

Higher-order shear and normal deformation theory is used in this paper to account thickness stretching effect for free vibration analysis of the cylindrical micro/nano shell subjected to an applied voltage and uniform temperature rising. Size dependency is included in governing equations based on the modified couple stress theory. Hamilton's principle is used to derive governing equations of the cylindrical micro/nano shell. Solution procedure is developed using Navier technique for simply-supported boundary conditions. The numerical results are presented to investigate the effect of significant parameters such as some dimensionless geometric parameters, material properties, applied voltages and temperature rising on the free vibration responses.     

A higher order coupled frequency characteristics study of smartmagneto-electro-elastic composite plates with cut-outs using finite element methods

This article deals with investigating the effect of cut-outs on the natural frequencies of magneto-electro-elastic (MEE) plates incorporating finite element methods based on higher order shear deformation theory (HSDT). In order to consider the influence of cut-out, the energy of the cut-out domain is sub-tracted from the total energy of the entire plate. The governing equations of motions are derived through incorporating Hamilton's principle and the solution is obtained using condensation technique. The proposed numerical formulation is verified with the results of previously published literature as well as the numerical software. In addition, this research focuses on evaluating the effect of geometrical skewness and boundary conditions on the frequency response. The influence of cut-outs on the degree of coupling between magnetic, electric and elasticfields is also investigated.     

齿轮啮合温升模型建立及仿真研究

借助动力学仿真软件ADAMS,建立了齿轮啮合传动仿真模型。提出了一种计算高速齿轮传动轮齿瞬现温升的方法,基于齿轮啮合原理和M atlab计算软件平台,建立了轮齿瞬现温升计算模型。实现了完整齿面各啮合点切向速度、摩擦系数、接触带半宽和法向载荷等参数的计算。运用B lock接触温度准则,得出齿轮各啮合点瞬现温升及接触温度变化的仿真分析结果,为齿轮传动结构的合理优化设计提供科学依据。     

Q345低合金结构钢的高温强度试验研究

采用恒温加载试验方法对钢结构建筑常用的Q345低合金结构钢的高温强度进行试验研究,采用切线交点法确定钢材有效屈服强度,并与其它方法强度取值进行对比,给出钢材高温强度回归公式,为钢结构建筑的抗火分析提供依据。     

基于北斗、短波的高精度时钟系统研究与设计

介绍了北斗、短波授时技术;对高稳恒温晶振及其频率特性进行分析的基础上,设计了一种基于北斗卫星、短波无线电授时的高精度时钟系统;该系统通过利用北斗接收处理模块、短波授时接收模块得到的秒脉冲信号、时间信息,经过延迟修正处理、脉冲滤波、脉冲补偿、脉冲统计得到标准的秒脉冲信号,实现对恒温晶振频率的校准,获得一个短期及长期频率稳定度都比较优良的时间频率标准,同时利用校频后恒温晶振分频出的1pps信号对时间芯片进行校准,对外输出高精度时间信息;对恒温晶振校频系统的基本工作原理及部分模块电路图进行了说明,试验结果表明,在时间不长于1h内,频率准确度优于1×10-10;该系统实用方便的方法达到了将晶体振荡器校准到较高指标的目的。     

失去润滑条件下弧齿锥齿轮传动系统瞬态温度场Simulink仿真分析

根据传热学理论和热网络法,以某型直升机尾减速器弧齿锥齿轮传动系统为研究对象,建立了其温度场Simulink仿真计算模型。基于该模型,计算获得该传动系统正常润滑条件下的稳态温度场,并以它作为初始条件计算分析该传动系统失去润滑条件下的瞬态温度场,为预测该弧齿锥齿轮传动系统在失去润滑条件下的干运转生存能力提供理论依据。     

基于敏感性分析的DF化学动力学模型的简化

基于两种燃料体系下的DF详细化学反应动力学模型,利用敏感性分析的方法,分别提出了相应的简化反应机理.简化过程中发现,仅考虑DF“冷反应”泵浦过程,忽略掉高振动激发态,忽略掉D2和DF分子的离解复合反应对整个系统影响不大.DF分子之间以及DF与D、D2、HF之间的能量转移反应具有较高的敏感性.简化机理在有效概括DF化学反...     

电磁发射用脉冲电抗器应力分析及结构设计

基于对电磁力以及热应力的解析计算公式的推导,运用ANSYS有限元仿真软件对固定电抗器顶底端面情况下的铜箔进行电磁-温度-结构耦合分析,分别得出热应力及所受总应力与应变的分布情况。进一步对电抗器的结构进行优化,综合考虑其结构强度要求与连发温度要求,确定电抗器的最优设计结构,最终通过试验验证出仿真与设计方案真实可信。     

Cell structure of microcellular combustible object foamed by supercritical carbon dioxide

In order to solve the issue that the combustible objects for cased telescoped ammunition (CTA) didn't burn completely during the combustion process, the microcellular combustible objects were foamed with numerous cells in the micron order to improve the combustion performance by the supercritical carbon dioxide (SCCO₂) foaming technology. As the cell structure determined the combustion properties of microcellular combustible objects, the solubility of SCCO₂ dissolved into the combustible objects was obtained from the gravimetric method, and scanning electron microscope (SEM) was applied to characterize the cell structure under various process conditions of solubility, foaming temperature and foaming time. SEM images indicate that the cell diameter of microcellular combustible objects is in the level of 1 μm and the cell density is about 10¹¹ cell⋅cm⁻³. The microcellular combustible objects fabricated by the SCCO₂ foaming technology are smooth and uniform, and the high specific surface area of cell structure can lead to the significant combustion performance of microcellular combustible object for CTA in the future.