星际探测太阳帆行星和太阳借力轨道全局优化

以太阳帆在20年内飞行至距离太阳200 AU以远进行星际探测为目标,研究太阳帆通过行星借力和太阳借力的轨道全局优化问题。建立太阳帆时间最优转移轨道数学模型,分析行星借力和太阳借力的约束条件,并用这些约束条件构造目标函数,从而将轨道优化的四点边值问题转化为求解无约束条件下的多变量优化问题。通过选取合理的约束权重,采用遗传算法获得大范围的粗略解,代入到序列二次规划算法中获得高精度解。仿真结果表明,虽然太阳帆通过太阳借力已获得相当大的加速度,但加上木星借力仍然可以节省相当多的飞行时间。提出的轨道优化思路,可以为太阳系逃逸任务轨道初步设计提供参考。     

A model of supply-chain decisions for resource sharing with an application to ventilator allocation to combat COVID-19

We present a stochastic optimization model for allocating and sharing a critical resource in the case of a pandemic. The demand for different entities peaks at different times, and an initial inventory for a central agency are to be allocated. The entities (states) may share the critical resource with a different state under a risk-averse condition. The model is applied to study the allocation of ventilator inventory in the COVID-19 pandemic by FEMA to different U.S. states. Findings suggest that if less than 60% of the ventilator inventory is available for non-COVID-19 patients, FEMA's stockpile of 20 000 ventilators (as of March 23, 2020) would be nearly adequate to meet the projected needs in slightly above average demand scenarios. However, when more than 75% of the available ventilator inventory must be reserved for non-COVID-19 patients, various degrees of shortfall are expected. In a severe case, where the demand is concentrated in the top-most quartile of the forecast confidence interval and states are not willing to share their stockpile of ventilators, the total shortfall over the planning horizon (until May 31, 2020) is about 232 000 ventilator days, with a peak shortfall of 17 200 ventilators on April 19, 2020. Results are also reported for a worst-case where the demand is at the upper limit of the 95% confidence interval. An important finding of this study is that a central agency (FEMA) can act as a coordinator for sharing critical resources that are in short supply over time to add efficiency in the system. Moreover, through properly managing risk-aversion of different entities (states) additional efficiency can be gained. An additional implication is that ramping up production early in the planning cycle allows to reduce shortfall significantly. An optimal timing of this production ramp-up consideration can be based on a cost-benefit analysis.     

基于CFP模型的装备系统能力开发方法

基于系统能力的装备系统开发能够使装备发展更好地适应未来战争。首先建立系统能力-功能-性能(简称CFP)概念模型,进一步定性分析系统能力与性能参数之间的映射关系。然后提出了在n维参数空间进行影射关系函数轨迹拟合的方法,定量地描述系统能力与性能参数之间的映射关系,建立CFP模型。最后以简例演示基于CFP模型进行定量系统能力开发的方法。     

临近空间拦截弹最优弹道跟踪制导律

针对拦截临近空间高超声速飞行器的弹道跟踪过程,基于线性二次型调节器理论和高斯伪谱法设计一种跟踪制导律。为了对标称弹道进行精确跟踪,考虑线性二次型跟踪问题,应用最优控制理论推导最优解的充要条件,得到带时变增益的线性状态反馈控制量的表达式;基于高斯伪谱法,在离散的勒让德-高斯点上利用标称弹道数据计算差分矩阵和系数矩阵,求得状态扰动反馈控制律。仿真结果表明,与基于求解矩阵黎卡提方程的方法相比,该方法选取较少的节点即可获得高精度的反馈控制量,且运算效率大幅提高,满足在线实施要求。     

反辐射无人攻击机过载参数分析

基于反辐射无人攻击机导引头控制原理,在建立反辐射无人机末制导系统数学模型的基础上,根据反辐射无人机的作战环境和特点,分析了反辐射无人攻击机攻击弹道预定过载参数的影响,并依据反辐射无人攻击机的弹道运动方程进行了仿真运算,选取了最佳的攻击弹道.     

基于模型参考的SINS/GPS制导炸弹俯仰偏航控制

由于SINS/GPS制导炸弹俯仰偏航要进行大空域的机动飞行,导致了其作为被控对象的状态方程参数变化剧烈,就要求飞控系统具有更强的适应能力和鲁棒性.因此.设计了基于模型参考变结构控制方法的鲁棒自动驾驶仪,具有良好的瞬态性能和抗参数大范围变化能力强等优点.以某型SlNS/GPS制导炸弹为例.选取典型的气动恶劣条件,进行了按给定制导指令飞行的六自由度全弹道飞行控制仿真,仿真结果表明,该自动驾驶仪能对制导炸弹实现鲁棒自适应控制,为飞控系统设计提供了重要参考.     

具有吞吐量和时延约束的软件无线电波形部署决策算法

针对当前具有吞吐量和时延约束的软件无线电波形部署决策算法在内存开销方面考虑的不足,提出一个更为通用的波形部署决策系统模型,将波形的处理开销、内存开销和通信带宽开销都纳入到波形部署决策过程中,并设计了一种基于动态规划的波形部署决策算法以最小化波形对平台各种计算资源的占用总和。仿真结果表明,内存对波形部署决策具有重要影响,与未考虑内存开销的解决方案相比,平台支持的平均最大波形数目和平均处理资源利用率均下降40%左右。     

A decomposition heuristic for the twin robots scheduling problem

This article provides an efficient heuristic based on decomposition for the twin robots scheduling problem (TRSP). TRSP concerns two moving robots executing storage and retrieval requests in parallel along a shared pathway. The depots are located at both ends of the line and a dedicated robot is assigned to each of them. While moving goods between their respective depots and some storage locations on the line, noncrossing constraints among robots need to be considered. Our heuristic uses a dynamic programming framework to determine the schedule of one robot while keeping the other one's fixed. It finds near‐optimal solutions even for large problem instances with hundreds of jobs in a short time span. © 2014 Wiley Periodicals, Inc. 62:16–22, 2015     

Modeling and solution for the ship stowage planning problem of coils in the steel industry

We consider a ship stowage planning problem where steel coils with known destination ports are to be loaded onto a ship. The coils are to be stowed on the ship in rows. Due to their heavy weight and cylindrical shape, coils can be stowed in at most two levels. Different from stowage problems in previous studies, in this problem there are no fixed positions on the ship for the coils due to their different sizes. At a destination port, if a coil to be unloaded is not at a top position, those blocking it need to be shuffled. In addition, the stability of ship has to be maintained after unloading at each destination port. The objective for the stowage planning problem is to minimize a combination of ship instability throughout the entire voyage, the shuffles needed for unloading at the destination ports, and the dispersion of coils to be unloaded at the same destination port. We formulate the problem as a novel mixed integer linear programming model. Several valid inequalities are derived to help reducing solution time. A tabu search (TS) algorithm is developed for the problem with the initial solution generated using a construction heuristic. To evaluate the proposed TS algorithm, numerical experiments are carried out on problem instances of three different scales by comparing it with a model‐based decomposition heuristic, the classic TS algorithm, the particle swarm optimization algorithm, and the manual method used in practice. The results show that for small problems, the proposed algorithm can generate optimal solutions. For medium and large practical problems, the proposed algorithm outperforms other methods. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 564–581, 2015     

柱体大攻角入水弹道建模与仿真

基于CFD计算获得了柱体大攻角入水过程流体动力特性,进而建立了大攻角入水弹道模型,使用流场-弹道耦合计算结果验证了模型的适用性和精度,然后仿真分析了入水攻角和速度对入水弹道的影响规律。该模型能较准确地预测柱体大攻角入水弹道,对研究发射平台安全性问题和空投鱼雷等入水攻击性武器的入水弹道预测问题等有较强的指导意义。