作战实验组织实施框架设计

为了规范指导实验人员有效开展作战实验,对作战实验组织实施框架进行了设计。通过忽略不同实验的细微差别,抽取作战实验组织实施的公共模式,从实验团队角度明确规定了实验的关键步骤,规范了实验组织实施过程和里程碑工作。能有效指导将实验对象的概念理解映射到实验系统中进行具体实验,保证了实验的成功实施。     

磁悬浮隔振系统设计与实现

本文介绍了磁悬浮控制技术的发展与应用情况。在建立系统动力学模型的基础上分析了隔振系统的基本特性,提出了应用加速度反馈来压低系统频带的方法。实验结果显示了该方案的有效性。     

环境试验技术的现状综述与集成环境应力试验分析系统

在阐述可靠性环境试验技术基本内涵的基础上,分析了国内环境试验技术研究与应用的发展概况,以及存在的主要问题。最后,针对复杂机电设备,从功能和信息集成的角度,提出了一种集成环境试验分析系统的构成模式及主要功能。     

光学仪器综合封存防护技术研究

本文针对目前光学仪器封存防护中存在的问题,依据光学仪器霉、雾、锈的生成机理,提出一种新型的综合封存技术,并通过试验验证了该技术的可靠性和和对环境的适应性。     

激励器结构参数对合成射流影响的试验研究

为了设计高性能的合成射流激励器,实验采用热线风速仪测量激励器出口的流动速度,对不同大小激励器、不同出口形状激励器、单 双膜激励器以及金属振动膜处于不同装配受压状态下的激励器分别进行了试验。实验结果显示:激励器的结构决定了合成射流激励器的性能;激励器出口射流平均速度除了与激励器大小、出口面积有关外,还与出口形状有关,采用方孔 矩形孔形式的开口有利于建立较强的合成射流;双膜与单膜工作相比,合成射流最大速度基本上是成两倍关系;金属振动膜的安装形式(受压状态)不影响合成射流随频率的变化规律,但对合成射流速度影响很大,当激励器振动膜处于螺栓拧紧受压状态时,与振动膜不受压状态相比,合成射流出口速度几乎下降了一个数量级。     

Blast resistance evaluation of urban utility tunnel reinforced with BFRP bars

To improve corrosion-resistance of shallow-buried concrete urban utility tunnels(UUTs),basalt fiber reinforced polymer(BFRP)bars are applied to reinforce UUTs.As the UUT must have excellent survival capability under accidental explosions,a shallow-buried BFRP bars reinforced UUT(BBRU)was designed and constructed.Repetitive blast experiments were carried out on this BBRU.Dynamic responses,damage evolutions and failure styles of the BBRU under repetitive explosions were revealed.The tunnel roof is the most vulnerable component and longitudinal cracks develop along the tunnel.When the scaled distance is larger than 1.10 m/kg1/3,no cracks are observed in the experiments.When the BBRU is severely damaged,there are five cracks forming and developing along the roof.The roof is simplified as a clamped-supported one-way slab,proved by the observation that the maximum strain of the transverse bar is much larger than that of the longitudinal bar.Dynamic responses of the roof slab are predicted by dynamic Euler beam theory,which can consistently predict the roof displacement under large-scaled-distance explosion.Compared with the UUT reinforced with steel bars,the BBRU has advantages in blast resistance with smaller deflections and more evenly-distributed cracks when the scaled distance is smaller than 1.260 m/kg1/3 and the steel bars enter plastic state.Longer elastic defamation of the BFRP bars endows the UUT more excellent blast resistance under small-scaled-distance explosions.     

Pressure relief of underground ammunition storage under missile accidental ignition

Safety of underground ammunition storage is an important issue, especially during the accidental ignition of missiles. This work investigates the pressure and temperature distribution of the multi-layer underground ammunition storage with a pressure relief duct during the accidental ignition process of the missile. A large-scale experiment was carried out using a multi-layered restricted space with a pressure relief duct to simulate the underground ammunition store and a solid rocket motor to simulate the accidental ignition of the missile. The results show that when the motor gas mass flow increased by 5.6 times, the maximum pressure of the ammunition storage increased by 5.87 times. At a certain motor flow rate, when the pressure relief exhaust area at the end of the relief duct was reduced by 1/2, the maximum pressure on the first layer did not change. But the rate of pressure relief was reduced and the time delayed for the pressure of ammunition store to drop to zero. In this experiment, when the motor ignition position was located in to the third layer ammunition chamber, the maximum pressure was reduced by 32.9％ and also reduced the rate of change of pressure. In addition, for the experimental conditions, the theoretical analysis of the pressure relief of the ammunition storage is given by a simplified model. Based on the findings, some suggestions to the safety protection design of ammunition store are proposed.     

高层建筑火场供水原则及其应用

能否保证火场不间断供水,是高层建筑火灾扑救成功的关键。根据高层建筑的特点,提出了高层建筑火场供水原则,并依据此原则,论述了高层建筑火场供水方法及注意问题。     

小口径火炮侵彻钢靶模拟实验研究及有限元分析

对小口径火炮侵彻钢靶问题,分别进行了实验和有限元分析,并将所得结果进行了比较;分析了小口径火炮侵彻钢靶的侵彻过程,得到了带空腔弹丸高速垂直侵彻钢板的典型破坏模式.     

长坑道中防护门上的化爆冲击波压力研究

为了对坑道中的防护门抗化爆冲击波进行有效的设计,先需确切知道作用在防护门上的反射压力。首先基于Hopkinson比例定律,用LS-DYNA动力有限元软件模拟了常规炸药在坑道入口外爆炸情况下,长坑道中自由场冲击波峰值压力的衰减规律,并由此确定作用在防护门上的反射压力。计算结果与其他经验方法的预测结果进行了比较。可供防护门的设计及动力响应研究参考。