图像识别技术在射线探伤中的应用

针对焊缝射线探伤中的缺陷评片问题,利用数字成像及图像识别技术,对射线探伤底片进行了计算机自动识剐技术的研究,并以此为基础,对典型缺陷进行了识别.结果显示,利用此技术能够提高和改进评片的质量及效率.     

直杆塑性动力屈曲的能量准则和特征参数解

提出弹塑性应力波作用下直杆动力屈曲的定量求解方法,将临界应力和惯性指数作为一对特征参数求解.由相平衡邻位形准则得出屈曲控制方程和边界条件,由所导出的能量转换和守恒准则得出压缩波阵面上的附加约束方程,由此得出了问题的完备定解条件,从而提出了求解直杆塑性动力屈曲的特征参数方法.     

遗传算法在非线性回归模型辨识中的应用

对遗传算法在非线性回归模型辨识中的应用进行了探讨,切削温度回归模型辨识的实例表明,该方法是有效的.     

基于Wigner-Ville时频幅值曲率的结构位置损伤识别

为探索既有明确物理意义又有良好实用性的结构损伤识别方法,利用Wigner-Ville时频分布（WVD）对结构自由振动响应进行解析,建立了WVD时频幅值与结构模态参数的函数关系,提出利用测点WVD时频幅值曲率来识别损伤。该方法物理意义明确,初始激励易于实施,且不需要模态参数识别,提高了损伤识别精度。算例分析结果表明,所提出的方法能较好地识别出结构单个或多个损伤位置,且数据易于获得,处理简便。     

高级在轨系统的自相似业务量预测链路优化模型

在AOS高级在轨系统链路协议的基础上,分析了具有自相似特性的业务流量,提出了一种基于FARIMA模型的自相似预测的链路优化模型。该预测模型基于分数阶统计理论,在估计赫斯特参数的基础上,根据不同的时间粒度,提前预测突发业务量的到来,从而降低了网络丢包率。仿真表明模型在20点预测内具有较好拟合性,在一定置信区间下具有较好的预测成功概率和较低的虚警概率,同时使网络丢包率大幅下降。     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.     

Feasibility of surface-coated friction stir welding tools to join AISI 304 grade austenitic stainless steel

An attempt is made to develop the tools that are capable enough to withstand the shear, impact and thermal forces that occur during friction stir welding of stainless steels. The atmospheric plasma spray and plasma transferred arc hardfacing processes are employed to deposit refractory ceramic based composite coatings on the Inconel 738 alloy. Five different combinations of self-fluxing alloy powder and 60% ceramic reinforcement particulate mixtures are used for coating. The best friction stir welding tool selected based on tool wear analysis is used to fabricate the austenitic stainless steel joints.     

Effect of welding processes and consumables on fatigue crack growth behaviour of armour grade quenched and tempered steel joints

Quenched and Tempered (Q&T) steels are widely used in the construction of military vehicles due to its high strength to weight ratio and high hardness. These steels are prone to hydrogen induced cracking (HIC) in the heat affected zone (HAZ) after welding. The use of austenitic stainless steel (ASS) consumables to weld the above steel was the only available remedy because of higher solubility for hydrogen in austenitic phase. The use of stainless steel consumables for a non-stainless steel base metal is not economical. Hence, alternate consumables for welding Q&T steels and their vulnerability to HIC need to be explored. Recent studies proved that low hydrogen ferritic steel (LHF) consumables can be used to weld Q&T steels, which can give very low hydrogen levels in the weld deposits. The use of ASS and LHF consumables will lead to distinct microstructures in their respective welds. This microstructural heterogeneity will have a drastic influence in the fatigue crack growth resistance of armour grade Q&T steel welds. Hence, in this investigation an attempt has been made to study the influence of welding consumables and welding processes on fatigue crack growth behaviour of armour grade Q&T Steel joints. Shielded metal arc welding (SMAW) and Flux cored arc welding (FCAW) were used for fabrication of joints using ASS and LHF consumables. The joints fabricated by SMAW process using LHF consumable exhibited superior fatigue crack growth resistance than all other joints.     

Landau相变中的自由能

Landau用序参量的幂级数展开来表示相变温度附近的自由能,强调对称性与序参量在相变中的作用.正确书写自由能形式,可以计算可能相的温度曲线,得到关于序参量的方程,从而推知系统的结构.     

随机滤波模型在变速箱剩余寿命预测中的应用研究

摘要：基于变速箱加速寿命实验的振动信号,提取信号的多种特征参量．通过分析各特征参量的敏感性和稳定性,选择幅域裕度指标、峰值指标、波形指标和RMS（RootMeanSquare）作为特征参量,建立一种基于随机滤波的变速箱剩余寿命预测模型,给出剩余寿命后验概率密度的递推公式,设计了极大似然估计方法求解模型参数,并经实例验证模型的有效性和实用性．