一种基于“GM(1,1)”模型的火炮初速灰预测方法

火炮初速量测是火炮进行弹道准备中的一项重要内容,运用灰色理论探讨火炮初速预测问题,既有利于提高火炮射击精度的修正,又有利于进一步完善火炮初速测量雷达的使用操作和改进设计。针对火炮初速随机变化的特点,基于灰色理论中的GM(1,1)模型,构建火炮初速灰预测模型,确定预测结果精度检验方法。最后通过一应用实例验证了该方法具有一定的合理性与实用性。     

阻拦索张力控制方法

飞机阻拦装置是机场保证飞机正常降落和拦阻因意外原因冲出跑道的飞机的重要保障设施。针对现有机械型阻拦装置难以适应未来多种机型阻拦需求的现状,提出一种以阻拦电机为吸能元件的电磁阻拦装置,搭建考虑阻拦索弯折波影响在内的电磁阻拦装置模型,设计电磁阻拦装置的闭环控制算法,并利用仿真进行了验证。     

An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes

The woven basalt fiber composites (WBFC) and the unidirectional [0°/90°/45°/-45°]_s basalt fiber composites (UBFC) were prepared by hot-pressing. Three-point bending test, low velocity impact test, and ballistic test were performed to the prepared composites. After the tests, the specimens were recovered and analyzed for micromorphology. Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC. Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC, but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC. For the ballistic test, it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests, microscopic analysis of the specimens was applied, and their failure mechanism was discussed. The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage. Although delamination damage can be found in the WBFC under the above loading conditions, the degree of delamination is far less than that of the UBFC.     

Interface defeat studies of long-rod projectile impacting on ceramic targets

The interface defeat phenomenon always occurs when a long-rod projectile impacting on the ceramic target with certain velocity, i.e., the projectile is forced to flow radially on the surface of ceramic plates for a period of time without significant penetration. Interface defeat has a direct effect upon the ballistic performance of the armor piercing projectile, which is studied numerically and theoretically at present. Firstly, by modeling the projectiles and ceramic targets with the SPH (Smoothed Particle Hydrodynamics) particles and Lagrange finite elements, the systematic numerical simulations on interface defeat are performed with the commercial finite element program AUTODYN. Three different responses, i.e., complete interface defeat, dwell and direct penetration, are reproduced in different types of ceramic targets (bare, buffered, radially confined and oblique). Furthermore, by adopting the validated numerical algorithms, constitutive models and the corresponding material parameters, the influences of projectile (material, diameter, nose shape), constitutive models of ceramic (JH-1 and JH-2 models), buffer and cover plate (thickness, constraints, material), as well as the prestress acted on the target (radial and hydrostatic) on the interface defeat (transition velocity and dwell time) are systematically investigated. Finally, based on the energy conservation approach and taking the strain rate effect of ceramic material into account, a modified model for predicting the upper limit of transition velocity is proposed and validated. The present work and derived conclusions can provide helpful reference for the design and optimization of both the long-rod projectile and ceramic armor.     

无陀螺捷联惯导系统角速度解算方法研究

传统的捷联惯导系统通常用陀螺仪测量载体的角速度,无陀螺捷联惯导系统用加速度计代替陀螺仪,从加速度计输出的比力中解算载体的角速度,角速度的解算精度决定了无陀螺捷联惯导系统的性能及能否在实际中得到应用。分析了一种12加速度计配置方式的无陀螺捷联惯导系统的角速度解算方法,并将卡尔曼滤波技术应用于角速度解算,提高了角速度求解精度。     

Shaped charge penetration into high- and ultrahigh-strength Steel–Fiber reactive powder concrete targets

Experiments on shaped charge penetration into high and ultrahigh strength steel-fiber reactive powder concrete (RPC) targets were performed in this paper. Results show that the variation of penetration depth and crater diameter with concrete strength is different from that of shaped charge penetration into normal strength concrete (NSC). The crater diameter of RPC is smaller than that of NSC penetrated by the shaped charge. The jet particles are strongly disturbed and hardly reach the crater bottom because they pass through the narrow channel formed by jet penetration into the RPC. The effects of radial drift velocity and gap effects of jet particles for a shaped charge penetration into RPC target are discussed. Moreover, a theoretical model is presented to describe the penetration of shaped charge into RPC target. As the concrete strength increases, the penetration resistance increases and the entrance crater diameter decreases. Given the drift velocity and narrow crater channel, the low-velocity jet particles can hardly reach the crater bottom to increase the penetration depth. Moreover, the narrow channel has a stronger interference to the jet particles with increasing concrete strength; hence, the gap effects must be considered. The drift velocity and gap effects, which are the same as penetration resistance, also have significant effects during the process of shaped charge penetration into ultrahigh-strength concrete. The crater profiles are calculated through a theoretical model, and the results are in good agreement with the experiments.     

机动管线河流水面铺设牵引力分析与计算

机动管线在穿越河流时常采用水面浮运的方式铺设到对岸,铺设过程中,准确计算管线所受拉力是可靠地设计穿越装备、管线安全施工及运行的关键。建立了水面浮运的数学模型,得出了受力面积的选取方法,利用积分法导出了管线两端拉力的计算公式,指出了影响拉力的因素。采用3种流速方式分别计算出管线两端的拉力并进行了比较,采用符合实际情况的水面流速函数计算出的结果比较合适,对铺设设备的选取提供了理论支撑,对管线铺设有一定的参考价值。     

理想气体绝热过程的微观实质

从分子动理论出发,建立理想气体绝热过程的微观模型,用麦克斯韦速度分布函数导出其过程方程.     

空气阻力对排球正面上手发球水平方向飞行距离的影响实验分析

该文以体院排球普修课男生为对象,通过高速摄影方法,对"空气阻力对正面上手发球水平方向飞行距离的影响"这一问题进行了实验研究.初步揭示了当击球高度,击球角度和击球初速度等条件一定的情况下同,正面上手发球在水平方向飞行的理论距离与实际距离的差值规律.