基于神经网络的四轮转向车辆辨识和控制

车辆的动力学受各种非线性因素(如轮胎特性和路面状况)的影响,因此,利用两自由度线性车辆模型很难描述车辆的动力学.本文提出了一个新的基于神经网络非线性建校和控制能力的4WS控制系统.首先将车辆动力学辩识为一个RBF冈给车辆模型,然后利用该RBF网络车辆模型设计RBF网络控制器.通过计算机仿真说明了所提方法的有效性.     

Novel aluminum-based fuel: Facile preparation to improve thermal reactions

To improve the thermal properties of aluminum (Al) in the energetic system, a coated structure with ammonium perchlorate (AP) was prepared by a facile approach. And N, N-Dimethylformamide (DMF) was chosen as an ideal solvent based on heterogeneous nucleation theory and molecular dynamics simulation. This coated structure could enlarge the contact area and improve the reaction environment to enhance the thermal properties. The addition of AP could accelerate oxidation temperature of Al with around 17.5 °C. And the heat release of 85@15 composition rises to 26.13 kJ/g and the reaction degree is 97.6% with higher peak pressure (254.6 kPa) and rise rate (1.397 MPa/s). An ideal ratio with 15 wt% AP was probed primarily. The high energy laser-induced shockwave experiment was utilized to simulate the reaction behavior in hot field. And the larger activated mixture of coated powder could release more energy to promote the growth of shockwave with higher speed up to 518.7 ± 55.9 m/s. In conclusion, 85@15 composition is expected to be applied in energetic system as a novel metal fuel.     

复合固体推进剂颗粒填充模型及其统计特性分析

复合固体推进剂属于高填充比颗粒类复合材料,氧化剂和金属颗粒在基体中的随机分布使其在细观尺度具有非均质的特点。从细观尺度研究固体推进剂燃烧及力学性能时,必须考虑颗粒级配、空间分布和种类等因素的影响。采用分子动力学方法,以硝酸酯增塑聚醚高能复合固体推进剂为研究对象,将固体颗粒模型化为球形,生成其在基体内随机分布的颗粒填充模型。利用Monte-Carlo算法模拟计算颗粒填充模型细观结构的两点概率函数,并研究了颗粒填充体积分数、尺寸与级配等参数对其的影响规律。从统计意义上给出具有各态历经性、统计均匀性和各向同性特点的颗粒填充构型最小周期性代表体元尺寸,可有效减小后续研究的计算量,节约计算成本。所构建的推进剂细观几何构型及对最小周期性代表体元尺寸的计算为后续开展复合固体推进剂细观尺度燃烧、燃面处铝团聚及力学性能数值研究奠定了基础。     

An efficient and modular modeling for launch dynamics of tubed rockets on a moving launcher

This paper develops a modular modeling and efficient formulation of launch dynamics with marching fire (LDMF) using a mixed formulation of the transfer matrix method for multibody systems (MSTMM) and Newton-Euler formulation. Taking a ground-borne multiple launch rocket systems (MLRS), the focus is on the launching subsystem comprising the rocket, flexible tube, and tube tail. The launching subsystem is treated as a coupled rigid-flexible multibody system, where the rocket and tube tail are treated as rigid bodies while the flexible tube as a beam with large motion. Firstly, the tube and tube tail can be elegantly handled by the MSTMM, a computationally efficient order-N formulation. Then, the equation of motion of the in-bore rocket with relative kinematics w.r.t. the tube using the Newton-Euler method is derived. Finally, the rocket, tube, and tube tail dynamics are coupled, yielding the equation of motion of the launching subsystem that can be regarded as a building block and further integrated with other subsystems. The deduced dynamics equation of the launching subsystem is not limited to ground-borne MLRS but also fits for tanks, self-propelled artilleries, and other air-borne and naval-borne weapons undergoing large motion. Numerical simulation results of LDMF are given and partially verified by the experiment.     

《连续系统建模》的计算机辅助学习与考核系统

本文介绍了一个用于《连续系统建模》学习与考核的计算机辅助教学课件的功能和设计原理,重点介绍了系统动力学模型图的知识表达和建模行为的有效性度量的方法。     

基于系统动力学方法的战时通用装备保障仿真研究

简要介绍了系统动力学的相关概念、特点.分析了战时通用装备保障系统的体系结构.并用系统动力学的方法对战时装甲装备保障子系统进行了简化模型仿真研究,验证了用系统动力学的方法对通用装备保障建模的可行性;利用系统动力学的方法对战时通用装备保障系统进行研究分析,必将对通用装备保障系统的结构优化和科学决策提供可靠的数据支持.     

子空间预测控制在固体氧化物燃料电池中的应用

为使固体氧化物燃料电池(SOFC)输出满足一定约束的稳定电压、提高其输出功率跟踪性能,采用文献中给出的SOFC动态模型,设计了基于子空间矩阵的预测控制器。将子空间辨识和预测控制算法结合起来,直接从开环输入输出数据获得预测控制器的控制矩阵,而不须经过中间参数模型辨识的步骤。仿真结果验证了所提子空间预测控制算法(SPC)的实用性。     

飞艇-绳索-子弹系留动力学研究

针对高空飞艇投放试验平台,采用多刚体系统Kane法建立了飞艇-绳索-子弹的开链式多刚体动力学模型,针对末修子弹系留试验中的关键动力学问题,分析研究了飞艇-子弹耦合系统的动力学特性.高空投放试验验证了动力学模型的有效性和正确性,该模型也可推广于其他绳索动力学系统.     

低雷诺数壁面约束流动皮托管测速误差分析与校正

针对低雷诺数壁面约束流动中皮托管测速误差产生的两大主要影响因素——剪切速度与近壁效应,采用计算流体力学技术分别对其进行数值模拟,并研究各自引起的误差变化规律。数值模拟结果表明:虽然剪切速度引起的流线偏移规律与相关文献结论基本一致,但是数值结果预测的流线偏移量并不是一个渐近函数;近壁距离在5倍管径即出现较为明显的测量误差,并且发现近壁距离在1倍管径处出现误差的非单调性变化。最后通过将数值模拟结果与现有的修正方法进行对比,提出了更为合理的修正方程。     

多体动力学仿真车辆传动齿轮疲劳寿命灵敏度分析

齿轮是机械传动中重要的传力构件,由于测试手段和试验方法的限制,齿轮设计的时候多采用静强度设计理论,无法准确地反应实际情况下的动态特性,导致齿轮的实际寿命和设计寿命有较大的差距。基于多体动力学仿真分析方法建立履带式车辆传动系统虚拟行驶试验平台,获得齿轮在不同工况下的动载荷谱。基于疲劳分析软件MSC.Fatigue获得了齿轮的疲劳寿命,进而改变齿轮的结构参数分析不同结构齿轮的疲劳寿命,得到其疲劳寿命随不同结构参数变化的规律,进行齿轮疲劳寿命的灵敏度分析,为齿轮的结构优化作了一定的探索。