一种运用遗传算法确定船舶航向控制模糊规则的方法

为了克服船舶航向控制模糊规则确定过程中的盲目性,引入一种与之相适应的遗传算法,以使结果成为某种意义下的最优解,从而从根本上解决这一重要问题.文中运用Matlab的C语言MEX-文件技术,将遗传算法源代码与Matlab直接结合起来,利用后者的强大建模能力,建立起完整的仿真模型.仿真结果表明,船舶的航向控制能力得到明显改善.     

脉冲等离子体推力器羽流的粒子模拟

目前微小卫星正在积极地发展中,脉冲等离子体推力器是其推进系统的一个重要发展方向,为了能够将PPT成功地运用于空间,需对其羽流进行研究.将DSMC(Direct Simulation Monte-Carlo)/PIC(Particle in Cell)流体混合算法与一维MHD放电模型相结合,一体化模拟NASA Glenn PPT羽流,对不同出口偏转角的羽流场进行模拟,并与实验结果进行了比较.计算结果显示引入出口速度的偏转角提高了模型的羽流扩散能力,羽流的扩散角是影响羽流的一个主要因素.     

某自行高炮虚拟训练系统设计及关键技术

结合自行式高炮装备的结构特点和训练需求,采用机理与外观相分离的设计思想,建立一种多节点、多任务的分布式仿真训练系统。以机理模型为设计核心,采用了客户/服务器模式的系统拓扑结构。介绍了复杂装备外观建模方法和交互技术以及基于MATLAB的机理模型构建和系统集成方法。     

A partial characterization of the optimal ordering/rationing policy for a periodic review system with two demand classes and backordering

We consider a finite horizon periodic review, single product inventory system with a fixed setup cost and two stochastic demand classes that differ in their backordering costs. In each period, one must decide whether and how much to order, and how much demand of the lower class should be satisfied. We show that the optimal ordering policy can be characterized as a state dependent (s,S) policy, and the rationing structure is partially obtained based on the subconvexity of the cost function. We then propose a simple heuristic rationing policy, which is easy to implement and close to optimal for intensive numerical examples. We further study the case when the first demand class is deterministic and must be satisfied immediately. We show the optimality of the state dependent (s,S) ordering policy, and obtain additional rationing structural properties. Based on these properties, the optimal ordering and rationing policy for any state can be generated by finding the optimal policy of only a finite set of states, and for each state in this set, the optimal policy is obtained simply by choosing a policy from at most two alternatives. An efficient algorithm is then proposed. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

0.18 μm CMOS工艺的GPS/BDS双模可重构接收机射频前端

采用低中频架构设计了一种0.18μm CMOS工艺的GPS/BDS双模可重构接收机射频前端,能在GPS L1模式或BDS B1模式下工作。通过频率自适应电路调整中频滤波器的时间常数,降低其频率不确定度;压控振荡器中加入4位开关电容阵列,以提高频率调谐范围和相位噪声性能;通过硬件复用的方式降低系统功耗。测试结果表明,在1.8 V电源电压下,功耗37.8 m W,电压增益为103 d B,GPS L1和BDS B1波段噪声系数均小于3.2 d B。     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016     

The effects of model parameter deviations on the variance of a linearly filtered time series

We consider a general linear filtering operation on an autoregressive moving average (ARMA) time series. The variance of the filter output, which is an important quantity in many applications, is not known with certainty because it depends on the true ARMA parameters. We derive an expression for the sensitivity (i.e., the partial derivative) of the output variance with respect to deviations in the model parameters. The results provide insight into the robustness of many common statistical methods that are based on linear filtering and also yield approximate confidence intervals for the output variance. We discuss applications to time series forecasting, statistical process control, and automatic feedback control of industrial processes. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于DSP+FPGA的导航计算机数据采集与处理硬件设计

根据捷联惯导系统中数据采集和运算处理的要求,提出了以高性能DSP为核心,由FPGA构成主要外部输入输出接口的导航计算机硬件设计方案;设计了I/F转换电路;给出了各电路的硬件结构框图和各器件的特性、选择与应用。从硬件方面分别讲述了FPGA和DSP的工作过程和功能。利用本方案,对实现军事和工程领域中导航系统微小型化、降低系统成本和体积具有重要意义。     

基于无线双工通信系统分组数据传输的探讨

分析了军用无线双工通信系统数据传输资源,指出了存在的问题及改进办法;利用话音、报文、传真、数据电路交换信令的工作模式标示,提出了基于无线双工通信系统的数据传输TCP/IP结构体系及协议栈,并探讨了网络适配和实现与军用公共数据网、地域通信网（电路交换网、分组交换网）、数字化部队单工无线电数据网互联的关键技术。