微光图像彩色合成的信噪比分析

介绍了用滤光片实现彩色微光电视系统的基本原理和方法,分析了加入滤光片前后图像的信噪比变化,认为合理选择滤光片可使彩色微光电视系统在一定程度上满足正常观察所需要的信噪比.     

复杂背景下机载雷达目标探测的模型分析

考虑机载雷达目标探测受到复杂环境因素的影响,建立复杂背景条件下机载雷达目标探测的系统模型.利用此模型提出一个机载雷达目标探测的效能指标.在效能仿真的基础上,给出复杂背景条件下诸要素对机载雷达目标探测的定量影响.仿真结果表明了该模型的正确性和有效性.     

天基核爆光辐射探测方法研究

通过计算提出了天基核爆炸光辐射探测指标要求,根据对源项信号特征的分析,设计了具有通带为1～4000Hz带通滤波器的天基核爆光辐射探测电路,采取了降噪措施,并以实验检验了其灵敏度、信噪比、频率响应和动态范围等性能,提出了软件修正系统误差的方法．     

GPS多天线多径抑制技术

针对小范围多天线系统中多径对各相关通道之间信噪比测量值影响的相关性,采用基于“当前统计”模型的扩展卡尔曼滤波技术得到多径信号各参数,从而消去多径信号影响。分析了多径对信噪比的影响,建立了扩展卡尔曼滤波的状态方程和观测方程。仿真表明,该方法能够有效地降低由多径引起的伪距测量误差和相位测量误差。     

复杂背景条件下的红外图像末制导技术

通过结合目标红外特征,研究了空-空弹在复杂背景条件下的目标红外成像末制导的技术原理和实施途径。对复杂地背景的辐射特征和主要空中攻击目标军用喷气战机的目标红外辐射源类型作了分析,研究了红外目标特征的提取方法和算法。     

基于自相关函数的信噪比估计方法

信噪比估计,作为衡量信道质量的标准,为许多自适应技术提供所需的信道信息。精确的信道质量估计值,可以有效提升这些技术的性能。研究表明,信号经过采样、发送波形成行后其自相关函数具有周期性。根据噪声和发送信号两者自相关函数的不同特性,提出一种利用自相关函数进行信噪比估计方法。仿真结果表明,该方法具有较高的估计精度。     

二次差频测距新方法及其性能分析

提出了一种基于二次差频测距的新方法。对其测距原理进行了详细推导,提出了简化发射机设计与便于后续信号处理的频点选取准则,理论分析了正确解模糊对信噪比的要求。通过与参差多频测距方法进行比较,分析了该方法的优越性。仿真结果验证了该方法的有效性。     

用于低信噪比机动目标跟踪的多分辨率方法

针对低信噪比情况下目前常用的滤波算法不能同时做到精确和高效跟踪机动目标的缺点,提出一种多分辨率滤波方法用于跟踪低信噪比情形下的机动目标.该算法利用离散小波变换和滤波器组将量测信息分解到不同分辨率的层级,由于在低分辨率下量测的误警率较低,所以在低分辨率层级实现对目标机动信息的提取,可以避免机动信息被噪声所淹没,缺失的信息...     

一种低信噪比下的伪码快速捕获算法

传统的伪码捕获算法消耗时间长且在低信噪比条件下伪码捕获虚警率高,针对该问题,提出了一种低信噪比条件下的伪码快速捕获算法。该算法首先利用快速傅里叶变换完成信号相干积累,然后根据频率进行门限判决,从而捕获相应的时域伪码。仿真实验结果表明：该算法可减少伪码捕获时间,降低伪码捕获的虚警概率。     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.