引信全电子安全系统失效分析及评估

本文根据全电子安全系统的一般结构模式,分析了其安全性设计的一般特点和可能造成其失效的各种原因,并在此基础上建立了全电子安全系统的失效故障树,给出了失效概率的定量计算结果。     

舰船水压场畸变的数值模拟

用有限基本解法对舰船下方附加翼板后的水压场进行了数值模拟。分光体船、附加单翼板和附加双翼板三种情况,在不同的水深下分别进行计算,获得了相应的纵向通过特性曲线,并与实验结果进行了比较。在不同的翼板位置、攻角和离船底距离下对水压场进行计算,以优化得到最佳水压场畸变效果。     

高可靠、强实时分布式系统的切换技术研究

本文首先给出某高可靠、强实时分布式系统及系统的两种切换方案的简要描述，然后对切换技术的实现进行讨论；最后，在建立强实时双工系统的可靠性模型基础上，对系统的两种切换方案进行分析与比较。研究结果表明：对于本系统，机组级切换优于结点机级切换，且可以减少程序的复杂度，提高系统的可靠性与实时性。     

开关电源的电磁干扰与抑制

通过分析开关电源产生ＥＭＩ信号的原因,叙述了电磁兼容的重要性,针对开关电源中ＥＭＩ信号的特点,重点介绍了几种抑制ＥＭＩ信号的方法和措施     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

解析美国大学TESL硕士培养的主要课程与设置理据——以曼卡托明尼苏达州立大学为例

把英语作为第二语言的教学是20世纪60年代在美国兴起并逐步走向独立的科目,它在综合相关专业的同时正在朝专业化方向发展。近年来其硕士层面的教育为全球培养了大量合格的中小学英语教师,取得了较好的成绩。本文以曼卡托明尼苏达州立大学英语系为例,并结合笔者在该系攻读TESL硕士学位时的经历,解析其主要课程及设置理据。     

(修，2撤3)关键几何参数对超声速膨胀器流场和性能影响的数值研究

为了揭示关键几何参数对超声速膨胀器流动特性影响的规律,对3种隔板安装角和5种出进口面积比超声速膨胀器设计工况下的流场进行了数值研究。结果表明：随隔板安装角增加,斜激波向出口迁移,斜激波强度略有降低,超声速膨胀器膨胀比减小,效率提高;随出进口面积比增加,流道内高速区显著扩大并逐渐靠近压力面,斜激波增强,出口流动损失增加,超声速膨胀器膨胀比增大,效率降低。为获得综合性能较优超声速膨胀器结构,需在较小出进口面积比和较大隔板安装角之间做折衷选择。     

ISAR雷达欺骗式干扰信号生成算法

宽带ISAR雷达能够从目标回波中计算得出众多目标特征,对ISAR雷达的干扰信号必须高逼真地模拟目标的电磁散射特性和运动特性。从弹头目标电磁散射机理出发,分析了干扰信号生成流程,提出二维成像干扰的实现方案。针对虚假目标特性模拟问题,提出基于一维距离像模板合成欺骗干扰信号的算法。算法采用距离像模板与实际宽带ISAR信号的卷积调制处理,生成的干扰信号能较好地反映目标的电磁特性。通过多个脉冲的模拟,生成的干扰信号也能够准确反映目标的运动特性。仿真实验对暗室测量数据和HRRP模板数据进行成像效果对比,验证了算法的有效性。该算法对二维成像干扰机的工程设计具有指导意义。