聚硅氧烷先驱体转化制备2D Cf/Si-O-C材料

以二维碳纤维布和廉价的聚硅氧烷为原料,采用先驱体转化工艺制备2D Cf/Si-O-C材料,对其力学性能进行了考察,并与以聚碳硅烷为先驱体制备的2D Cf/SiC材料在价格和性能方面进行了对比。实验表明,2D Cf/Si-O-C材料力学性能较2D Cf/SiC材料有所下降,但成本大大降低。2D Cf/Si-O-C材料弯曲强度达到157.9 MPa,断裂韧性达到8.4MPa.m1/2,剪切强度达到23.4MPa,并且在1400℃下能较好保持材料的力学性能。     

气囊辅助RTM制备复合材料承力筒内腔尺寸控制技术

根据气囊充压压力与复合材料承力筒内径之间的变化关系,给出了成型复合材料承力筒内表面的气囊尺寸计算方程。分析了气囊充压压力增大对承力筒的壁厚、纤维含量和弯曲性能的影响。采用气囊辅助RTM工艺整体制备出复合材料承力筒。试验结果表明,气囊充压压力使复合材料承力筒的壁厚减薄,纤维体积含量增加,弯曲性能提高;选择适当的气囊充压压力可以制备出满足设计要求的复合材料承力筒。     

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

High-performance ballistic fibers, such as aramid fiber and ultra-high-molecular-weight polyethylene (UHMWPE), are commonly used in anti-ballistic structures due to their low density, high tensile strength and high specific modulus. However, their low modulus in the thickness direction and insufficient shear strength limits their application in certain ballistic structure. In contrast, carbon fiber reinforced epoxy resin matrix composites (CFRP) have the characteristics of high modulus in the thickness direction and high shear resistance. However, carbon fibers are rarely used and applied for protection purposes. A hybridization with aramid fiber reinforced epoxy resin matrix composites (AFRP) and CFRP has the potential to improve the stiffness and the ballistic property of the typical ballistic fiber composites. The hybrid effects on the flexural property and ballistic performance of the hybrid CFRP/AFRP laminates were investigated. Through conducting mechanical property tests and ballistic tests, two sets of reliable simulation parameters for AFRP and CFRP were established using LS-DYNA software, respectively. The experimental results suggested that by increasing the content of CFRP that the flexural properties of hybrid CFRP/AFRP laminates were enhanced. The ballistic tests’ results and the simulation illustrated that the specific energy absorption by the perforation method of CFRP achieved 77.7% of AFRP. When CFRP was on the striking face, the shear resistance of the laminates and the resistance force to the projectiles was promoted at the initial penetration stage. The proportion of fiber tensile failures in the AFRP layers was also enhanced with the addition of CFRP during the penetration process. These improvements resulted in the ballistic performance of hybrid CFRP/AFRP laminates was better than AFRP when the CFRP content was 20 wt% and 30 wt%.     

多铁性磁电智能复合材料的力学研究进展

介绍了多铁性磁电智能复合材料的概念、分类及发展现状;总结了两类典型多铁性复合材料的力学问题（包括波动与振动问题、夹杂问题、断裂问题等）的研究进展;分析了层状多铁性复合材料力学行为的特殊性;基于应变介导的磁电耦合机制,阐述了界面断裂力学研究对于层状多铁性复合材料研制的重要性和必要性;最后指出了该领域下一步的研究方向。     

准陶瓷Cf/SiC复合材料的制备

采用热重-差热(TG-DTA)、红外(IR)等分析测试手段,研究了聚碳硅烷(PCS)的裂解及化学转化过程,从理论上验证了先驱体聚碳硅烷(PCS)600℃裂解产物的准陶瓷特性.先驱体聚碳硅烷在600℃呈现一种半有机、半无机状态,其产物具有准陶瓷的特征,在大约750℃出现无机化转变高峰,固称其为准陶瓷.以碳布、准三维编织体、三维编织体为增强体,采用先驱体浸渍裂解(PIP)工艺在600℃制备了碳纤维增强碳化硅(Cf/SiC)准陶瓷基复合材料.结果表明,以三维编织体增强的准陶瓷Cf/SiC复合材料获得了较理想的结构、性能,所制备3D-Cf/SiC复合材料密度仅有1.27g/cm3,弯曲强度达到193.69MPa,室温拉伸强度为197.69MPa,600℃拉伸强度为167.33MPa.复合材料断口形貌分析表明,在低温600℃制备的准陶瓷Cf/SiC复合材料呈现明显的韧性断裂特征.     

RTM工艺整体成型复合材料连接裙轴压性能

整体成型的固体火箭发动机复合材料连接裙有助于连接裙的减重及其使用性能的提高。本文采用RTM工艺制备出了全复合材料整体连接裙并对其进行了轴压承载性能考核。试验结果表明,RTM工艺整体成型的复合材料连接裙质量均匀,在设计载荷作用下,连接裙的轴向应变远小于0.5%的复合材料许用应变指标,连接裙的轴向表观结构刚度为40.9GPa。     

碳纤维强度的统计特性及对复合材料线芯力学性能的影响

测试了国产T300级碳纤维的单丝和复丝拉伸强度,并用Weibull分布来描述碳纤维单丝平均拉伸强度。采用拉挤工艺制备出国产碳纤维复合线芯,测试了国产碳纤维复合线芯的弯曲强度和短梁剪切强度性能。结果表明:国产T300级碳纤维单丝拉伸强度性能达到东丽T300碳纤维水平,且分散性更小;复丝强度略低。国产T300级碳纤维集束性较差,在拉挤抽纱过程中,容易夹纱和起毛。在纤维体积含量基本相同情况下,国产T300级碳纤维复合线芯力学性能与东丽T700碳纤维复合线芯力学性能相差不大。     

用溶胶-凝胶法制备碳纤维三维编织物增强氧化铝基复合材料的研究

本文研究了溶胶－凝胶（Ｓｏｌ－ｇｅｌ）法制备碳纤维三维编织物增强氧化铝（Ａｌ２Ｏ３）基复合材料的成型工艺及其力学性能，研究了两种主要起始物Ａｌ（ＮＯ３）３、ＡｌＣｌ３配制的氧化铝溶胶对复合材料成型工艺和力学性能的影响。分别以Ａｌ（ＮＯ３）３和ＡｌＣｌ３为起始物，制备得到Ⅰ＃、Ｉ＃复合材料。研究表明，以Ａｌ（ＮＯ３）３为起始物配制的溶胶粘度较小，利于材料的致密化。经过溶胶浸渍、凝胶、裂解１３个周期后，Ⅰ＃材料的密度和室温三点弯曲强度分别为１．８６ｇ／ｃｍ３和１４５．２ＭＰａ，而ＩＩ＃材料的密度和室温三点弯曲强度分别为１．６３ｇ／ｃｍ３和１０４．１ＭＰａ，材料均呈典型的韧性断裂模式。用扫描电子显微镜（ＳＥＭ）观察试样的断口形貌，发现断口表面有大量的纤维拔出，纤维表现了较好的增韧效果。     

UHMWPE复合材料抗爆实验研究

运用定制的聚偏四氟乙烯(PVDF)压电传感器,直接测量爆炸载荷下UHMWPE层叠无纬布和PU基体的UHMWPE复合材料内部冲击波压力峰值,对其冲击波衰减特性进行了实验研究。实验结果表明:UHMWPE复合材料对爆炸冲击波有很好的衰减作用,含有PU基体的UHMWPE复合材料比UHMWPE层叠无纬布对爆炸冲击波有更好的衰减效果。UHMWPE复合材料具有轻质、吸收冲击波效率高等特性,在爆炸冲击波防护领域有很好的应用前景。     

Influence of Al2O3 particles on the microstructure and mechanical properties of copper surface composites fabricated by friction stir processing

The influence of three factors, such as volume percentage of reinforcement particles (i.e. Al₂O₃), tool tilt angle and concave angle of shoulder, on the mechanical properties of Cu–Al₂O₃ surface composites fabricated via friction stir processing was studied. Taguchi method was used to optimize these factors for maximizing the mechanical properties of surface composites. The fabricated surface composites were examined by optical microscope for dispersion of reinforcement particles. It was found that Al₂O₃ particles are uniformly dispersed in the stir zone. The tensile properties of the surface composites increased with the increase in the volume percentage of the Al₂O₃ reinforcement particles. This is due to the addition of the reinforcement particles which increases the temperature of recrystallization by pinning the grain boundaries of the copper matrix and blocking the movement of the dislocations. The observed mechanical properties are correlated with microstructure and fracture features.