Application of Markov renewal theory and semi-Markov decision processes in maintenance modeling and optimization of multi-unit systems

In this paper, a condition-based maintenance model for a multi-unit production system is proposed and analyzed using Markov renewal theory. The units of the system are subject to gradual deterioration, and the gradual deterioration process of each unit is described by a three-state continuous time homogeneous Markov chain with two working states and a failure state. The production rate of the system is influenced by the deterioration process and the demand is constant. The states of the units are observable through regular inspections and the decision to perform maintenance depends on the number of units in each state. The objective is to obtain the steady-state characteristics and the formula for the long-run average cost for the controlled system. The optimal policy is obtained using a dynamic programming algorithm. The result is validated using a semi-Markov decision process formulation and the policy iteration algorithm. Moreover, an analytical expression is obtained for the calculation of the mean time to initiate maintenance using the first passage time theory.     

On efficient algorithms for finding efficient salvo policies

We consider the salvo policy problem, in which there are k moments, called salvos, at which we can fire multiple missiles simultaneously at an incoming object. Each salvo is characterized by a probability p_i: the hit probability of a single missile. After each salvo, we can assess whether the incoming object is still active. If it is, we fire the missiles assigned to the next salvo. In the salvo policy problem, the goal is to assign at most n missiles to salvos in order to minimize the expected number of missiles used. We consider three problem versions. In Gould's version, we have to assign all n missiles to salvos. In the Big Bomb version, a cost of B is incurred when all salvo's are unsuccessful. Finally, we consider the Quota version in which the kill probability should exceed some quota Q. We discuss the computational complexity and the approximability of these problem versions. In particular, we show that Gould's version and the Big Bomb version admit pseudopolynomial time exact algorithms and fully polynomial time approximation schemes. We also present an iterative approximation algorithm for the Quota version, and show that a related problem is NP-complete.     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

新型空间绳系机器人逼近动力学建模及控制

为弥补传统空间机器人操作范围小,风险高的缺点,介绍了一种新型空间绳系机器人系统。建立其任务核心的逼近动力学模型,基于反馈线性化技术和神经网络控制技术设计智能逼近控制系统,仿真结果验证了控制系统的有效性,为新型近距离空间操作技术的发展奠定基础。     

动态飞行模拟器相似性分析

动态飞行模拟器的相似性是评价动态飞行仿真的重要指标。应用控制论方法,结合动态飞行特点,给出了动态飞行模拟器的相似性准则。通过对动态飞行模拟器运动分析,结果表明动态飞行模拟器相似性准则可以评价仿真的相似性。     

满足大动压模拟要求的试验弹道优化设计

为了解决弹道导弹在高海拔发射场进行飞行试验时的大动压检验问题,提出一种模拟大动压条件的试验弹道设计方法。针对发射场的实际特点,建立残骸再入的动力学模型与落区边界模型;将大动压模拟条件转化为过程约束,提出一种主动段联合优化策略。基于自适应模拟退火算法,分别设计了三组满足不同大动压模拟条件和各项约束的试验弹道,并给出了对应的落区调整方案,验证了该方法的可行性。设计结果表明,最大动压主要出现在一级,一级最大负攻角增加,则最大动压也明显提高;同时调整发射方位角和二、三级程序角可以保证试验弹道满足弹头落点约束条件。     

掠飞末敏弹耦合运动动导数计算

以新型掠飞末敏弹为研究对象,提出了基于欧拉转动定理和滑移网格技术的复杂角运动模拟方法,利用著名的罗德里格斯转换矩阵插值求得弹箭在每个时间步的角速度修正值,并指定给球形滑移网格区。通过对非定常气动参数进行求解辨识,分析了不同马赫数下掠飞末敏弹滚转运动对其俯仰组合动导数和升力系数动导数的影响规律。结果表明:所提角运动模拟方法可有效消除姿态角计算的累积误差,实现对弹箭任意给定角运动的准确模拟;弹箭滚转运动对俯仰组合导数和升力系数动导数的辨识结果均存在显著影响,在进行弹箭动导数计算和稳定性分析时需充分考虑俯仰耦合效应的影响。     

A partial characterization of the optimal ordering/rationing policy for a periodic review system with two demand classes and backordering

We consider a finite horizon periodic review, single product inventory system with a fixed setup cost and two stochastic demand classes that differ in their backordering costs. In each period, one must decide whether and how much to order, and how much demand of the lower class should be satisfied. We show that the optimal ordering policy can be characterized as a state dependent (s,S) policy, and the rationing structure is partially obtained based on the subconvexity of the cost function. We then propose a simple heuristic rationing policy, which is easy to implement and close to optimal for intensive numerical examples. We further study the case when the first demand class is deterministic and must be satisfied immediately. We show the optimality of the state dependent (s,S) ordering policy, and obtain additional rationing structural properties. Based on these properties, the optimal ordering and rationing policy for any state can be generated by finding the optimal policy of only a finite set of states, and for each state in this set, the optimal policy is obtained simply by choosing a policy from at most two alternatives. An efficient algorithm is then proposed. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

基于ADAMS和Matlab的大口径舰炮发射系统动力学仿真

利用ADAMS和Matlab/Simulink两大软件的信息交互功能,将ADAMS中的全炮动力学仿真模型生成ADAMS_SUB模块,并将其嵌入联合后坐系统仿真模型中;通过ADAMS和 Matlab/Simulink同步运行对全炮进行发射动力学联合仿真,模拟大口径舰炮发射的全过程,分析全炮的动态响应.对全炮发射动力学联合仿真结果进行后处理分析,观察炮口扰动曲线,进行稳定性分析和炮口扰动分析.根据分析结果,对所建模型及仿真模块进行评价,结果表明,仿真结果与靶场试验数据基本吻合,为物理样机的研制提供了重要的理论参考依据.     

潜艇的承载力与水下动力抗沉

阐明了潜艇承载力图谱的一种新算法,分析了危险舵卡的基本挽回方法及其衡准,论述了当前水下动力抗沉的实用方法及评价指标.