高轨双星辐射源跟踪的高斯和-容积Kalman滤波算法

针对辐射源运动方程和观测方程的强非线性,提出基于高斯和框架与5阶容积Kalman滤波(5CKF)的跟踪算法GS-5CKF。该方法将起始时刻的时差观测量所确定的位于地球表面的时差线按经度等间隔划分,初始化多个并行的5CKF,线性组合各滤波器的输出获得辐射源运动状态的估计。针对5CKF,提出新的非线性测度并引入滤波器分裂与合并,从而提高了跟踪精度,同时保持GS-5CKF算法复杂度基本不变。仿真表明,相对仅使用单个5CKF和基于高斯和框架但使用3阶容积Kalman滤波器的GS-3CKF等方法,提出的算法具有更高的估计精度。     

高重频模式下的海杂波仿真方法

机载脉冲多普勒雷达在高重频模式下的海杂波仿真精确度是影响整个雷达系统仿真的先决因素。在分析基于网格法的杂波功率谱模型的前提下,设计了一种利用杂波功率谱进行时域重构,产生幅度分布服从对数-正态分布海杂波的仿真模型。仿真结果与理论值吻合较好,说明仿真开发模式是可行的,仿真模型是正确、有效的。     

时序逻辑的并行描述与隐含遍历

随着电路规模的迅速增长,设计验证越来越复杂,从而需要高速的数据处理系统。基于总线型多机系统环境,研究电路网表和布尔表达式的BDD（Binary Decision Diagram）并行构造方法,并通过隐含遍历任务的动态调度设计有效地完成时序逻辑的状态遍历。     

自旋对一维正常金属介观环中持续电流的影响

采用自由单电子模型 ,得到了考虑电子自旋后一维正常金属介观环中持续电流的解析及数值计算结果。推广至三维介观环 ,得到了与实验结果接近的结论。首次发现了由于自旋引起的调制现象。     

基于高斯和-容积Kalman滤波的高轨双星辐射源跟踪

高轨双星系统可通过测量辐射源信号的到达时差、频差和到达高轨卫星的多普勒频移,跟踪沿地球表面巡航且载频固定、已知的运动辐射源。针对辐射源运动方程和观测方程的强非线性,提出了基于高斯和框架与5阶容积Kalman滤波的运动辐射源跟踪算法GS-5CKF。算法将起始时刻的时差观测量所确定的处于地球表面的时差线按辐射源经度等间隔划分,初始化多个并行的5阶容积Kalman滤波器,线性组合各滤波器每个时刻的输出以获得辐射源运动状态的估计。针对5阶容积Kalman滤波器,提出了相应的非线性测度并引入滤波器分裂与合并,以提高跟踪精度并保持GS-5CKF算法计算复杂度基本不变。仿真表明,相对仅使用单个5阶容积Kalman滤波器和基于高斯和框架但使用3阶容积Kalman滤波器的GS-3CKF等算法,提出的跟踪算法具有更高的估计精度。     

Modeling and analysis of multiobjective lot splitting for N‐product M‐machine flowshop lines

Lot splitting is a new approach for improving productivity by dividing production lots into sublots. This approach enables accelerating production flow, reducing lead‐time and increasing the utilization of organization resources. Most of the lot splitting models in the literature have addressed a single objective problem, usually the makespan or flowtime objectives. Simultaneous minimization of these two objectives has rarely been addressed in the literature despite of its high relevancy to most industrial environments. This work aims at solving a multiobjective lot splitting problem for multiple products in a flowshop environment. Tight mixed‐integer linear programming (MILP) formulations for minimizing the makespan and flowtime are presented. Then, the MinMax solution, which takes both objectives into consideration, is defined and suggested as an alternative objective. By solving the MILP model, it was found that minimizing one objective results in an average loss of about 15% in the other objective. The MinMax solution, on the other hand, results in an average loss of 4.6% from the furthest objective and 2.5% from the closest objective. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Lot streaming with supplier–manufacturer coordination

Lot splitting refers to breaking a production lot into smaller sublots during production. Coordinating lot splitting decisions across multiple stages of a production process is a challenging task. Traditional lot splitting and lot streaming models implicitly assume that the entire system is operated and owned by the same firm, or there exists a coordinator who controls the operation of all machines in the system. In this paper, we consider the situation where the machines in a multiple‐stage production process are owned and managed by different companies. Every item in a given production lot has to go through the processing by the supplier's machine, followed by the manufacturer's machine, and so on. We develop and analyze coordination mechanisms that enable different parties in the supply chain to coordinate their lot splitting decisions so as to achieve a systemwide optimum. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

用多重网格TVD方法求解三维高超音速粘性流场

本文采用时间相关法求解了三维Ｎ－Ｓ方程。在计算中，对于压力和对流项采用Ｒｏｅ的通量差分分裂技术和Ｏｓｈｅｒ－Ｃｈａｋｒａｖａｒｔｈｙ的ＴＶＤ格式，对于粘性项，采用了中心差分格式。通过数值模拟得到了钝头双锥体高超音速层流流场在不同攻角下的数值解。计算的重点放在壁面热流率的预测。在攻角为４°和１２°的状态下，Ｓｔａｎｔｏｎ数的计算值与实验值进行了比较，二者吻合较好。为了加快收敛速率，计算时采用了多重网格方法。     

Optimal job splitting on a multi‐slot machine with applications in the printing industry

In this article, we define a scheduling/packing problem called the Job Splitting Problem, motivated by the practices in the printing industry. There are n types of items to be produced on an m‐slot machine. A particular assignment of the types to the slots is called a “run” configuration and requires a setup cost. Once a run begins, the production continues according to that configuration and the “length” of the run represents the quantity produced in each slot during that run. For each unit of production in excess of demand, there is a waste cost. Our goal is to construct a production plan, i.e., a set of runs, such that the total setup and waste cost is minimized. We show that the problem is strongly NP‐hard and propose two integer programming formulations, several preprocessing steps, and two heuristics. We also provide a worst‐case bound for one of the heuristics. Extensive tests on real‐world and randomly generated instances show that the heuristics are both fast and effective, finding near‐optimal solutions. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

基于分束法的金属板小角度微波后向散射系数测试

使用微波分光仪构建了分束法测试系统,利用分束法测试了10.5GHz频率下0°～10°铝板、不锈钢板、镀锌铁板的后向散射系数,结果表明金属板的微波后向散射系数随方向角的增加而迅速减小,与理想导体平面的镜面反射特征一致,而且电导率较大的铝板更适合作为分束法的定标板。