飞机机翼结构损伤仿真研究

飞机结构的战伤模式及战伤程度预测对于制定战场抢修预案及改进战斗生存力设计具有重要意义。采用计算机模拟仿真技术定量分析了飞机机翼结构遭受射弹攻击后的损伤情况。通过损伤仿真讨论了3类情形,一是机翼结构受到简单的侵彻后的冲击效应;二是高速射弹攻击带有翼盒的机翼,而产生流体动力冲压效应;三是在射弹冲击模型中增加爆炸条件,研究射弹以任意角度冲击不同的位置产生的耦合效应。基于AN SY S/LS-DYNA仿真,给出了机翼结构损伤的结果,结论为战伤飞机战场抢修的快速评估提供了科学依据,也为飞机平时修理提供了参考。     

部分服务台同步多重休假的GI/M/c稳态队长

在经典GI/M/c排队中引入部分服务台同步多重休假策略,利用拟单生过程和矩阵几何解的方法,求解系统的稳态队长分布及其条件随机分解。     

A partial characterization of the optimal ordering/rationing policy for a periodic review system with two demand classes and backordering

We consider a finite horizon periodic review, single product inventory system with a fixed setup cost and two stochastic demand classes that differ in their backordering costs. In each period, one must decide whether and how much to order, and how much demand of the lower class should be satisfied. We show that the optimal ordering policy can be characterized as a state dependent (s,S) policy, and the rationing structure is partially obtained based on the subconvexity of the cost function. We then propose a simple heuristic rationing policy, which is easy to implement and close to optimal for intensive numerical examples. We further study the case when the first demand class is deterministic and must be satisfied immediately. We show the optimality of the state dependent (s,S) ordering policy, and obtain additional rationing structural properties. Based on these properties, the optimal ordering and rationing policy for any state can be generated by finding the optimal policy of only a finite set of states, and for each state in this set, the optimal policy is obtained simply by choosing a policy from at most two alternatives. An efficient algorithm is then proposed. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

基于无线双工通信系统分组数据传输的探讨

分析了军用无线双工通信系统数据传输资源,指出了存在的问题及改进办法;利用话音、报文、传真、数据电路交换信令的工作模式标示,提出了基于无线双工通信系统的数据传输TCP/IP结构体系及协议栈,并探讨了网络适配和实现与军用公共数据网、地域通信网（电路交换网、分组交换网）、数字化部队单工无线电数据网互联的关键技术。     

Dynamic server assignment policies for assembly‐type queues with flexible servers

We seek dynamic server assignment policies in finite‐capacity queueing systems with flexible and collaborative servers, which involve an assembly and/or a disassembly operation. The objective is to maximize the steady‐state throughput. We completely characterize the optimal policy for a Markovian system with two servers, two feeder stations, and instantaneous assembly and disassembly operations. This optimal policy allocates one server per station unless one of the stations is blocked, in which case both servers work at the unblocked station. For Markovian systems with three stations and instantaneous assembly and/or disassembly operations, we consider similar policies that move a server away from his/her “primary” station only when that station is blocked or starving. We determine the optimal assignment of each server whose primary station is blocked or starving in systems with three stations and zero buffers, by formulating the problem as a Markov decision process. Using this optimal assignment, we develop heuristic policies for systems with three or more stations and positive buffers, and show by means of a numerical study that these policies provide near‐optimal throughput. Furthermore, our numerical study shows that these policies developed for assembly‐type systems also work well in tandem systems. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

0.18 μm CMOS工艺的GPS/BDS双模可重构接收机射频前端

采用低中频架构设计了一种0.18μm CMOS工艺的GPS/BDS双模可重构接收机射频前端,能在GPS L1模式或BDS B1模式下工作。通过频率自适应电路调整中频滤波器的时间常数,降低其频率不确定度;压控振荡器中加入4位开关电容阵列,以提高频率调谐范围和相位噪声性能;通过硬件复用的方式降低系统功耗。测试结果表明,在1.8 V电源电压下,功耗37.8 m W,电压增益为103 d B,GPS L1和BDS B1波段噪声系数均小于3.2 d B。     

一种运用遗传算法确定船舶航向控制模糊规则的方法

为了克服船舶航向控制模糊规则确定过程中的盲目性,引入一种与之相适应的遗传算法,以使结果成为某种意义下的最优解,从而从根本上解决这一重要问题.文中运用Matlab的C语言MEX-文件技术,将遗传算法源代码与Matlab直接结合起来,利用后者的强大建模能力,建立起完整的仿真模型.仿真结果表明,船舶的航向控制能力得到明显改善.     

Value management of diagnostic equipment with cancelation,no‐show,and emergency patients

Magnetic resonance imaging and other multifunctional diagnostic facilities, which are considered as scarce resources of hospitals, typically provide services to patients with different medical needs. This article examines the admission policies during the appointment management of such facilities. We consider two categories of patients: regular patients who are scheduled in advance through an appointment system and emergency patients with randomly generated demands during the workday that must be served as soon as possible. According to the actual medical needs of patients, regular patients are segmented into multiple classes with different cancelation rates, no‐show probabilities, unit value contributions, and average service times. Management makes admission decisions on whether or not to accept a service request from a regular patient during the booking horizon to improve the overall value that could be generated during the workday. The decisions should be made by considering the cancelation and no‐show behavior of booked patients as well as the emergency patients that would have to be served because any overtime service would lead to higher costs. We studied the optimal admission decision using a continuous‐time discrete‐state dynamic programming model. Identifying an optimal policy for this discrete model is analytically intractable and numerically inefficient because the state is multidimensional and infinite. We propose to study a deterministic counterpart of the problem (i.e., the fluid control problem) and to develop a time‐based fluid policy that is shown to be asymptotically optimal for large‐scale problems. Furthermore, we propose to adopt a mixed fluid policy that is developed based on the information obtained from the fluid control problem. Numerical experiments demonstrate that this improved policy works effectively for small‐scale problems. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 287–304, 2016     

一种新型混合跳频通信技术

文中提出了一种新型混合跳频通信技术,该技术结合传统跳频技术和差分跳频技术,在较窄的频带上采用差分跳频调制,并将该调制信号与另一更宽频带内的慢跳频信号进行混频,最终得到一个跳速高、频带宽的调制信号。接收端解调时,先按照传统跳频解调的方式进行慢跳频的解调,再按照差分跳频解调的方式对信号进行差分跳频解调。这种混合跳频通信技术在提高数据传输速率的同时,也可以很好地改善系统的误码率性能和抗单音干扰性能。     

基于DSP+FPGA的导航计算机数据采集与处理硬件设计

根据捷联惯导系统中数据采集和运算处理的要求,提出了以高性能DSP为核心,由FPGA构成主要外部输入输出接口的导航计算机硬件设计方案;设计了I/F转换电路;给出了各电路的硬件结构框图和各器件的特性、选择与应用。从硬件方面分别讲述了FPGA和DSP的工作过程和功能。利用本方案,对实现军事和工程领域中导航系统微小型化、降低系统成本和体积具有重要意义。