正畸力作用下微种植体支抗的应力分析

通过建立直径为1.4,1.6,1.8 mm,长度为6,8,10 mm,螺纹深度为0.2 mm,螺纹间距0.5 mm的Ti质微种植体支抗与颌骨有限元模型,研究在常用载荷1.96 N正畸力与微种植体长轴呈45°,60°和75°三种角度时的Ti质微种植体应力分布和大小。分析得出,应力主要集中在微种植体颈部1 mm内,在其颈部1.2 mm的范围内应力值的衰减都很明显,在颈部1.2 mm的范围内曲线较陡。在设定的加载条件下,不同直径的微种植体应力值呈规则的变化趋势,直径1.8 mm,45°时微种植体的各应力值极值最小。微种植体长度对应力的影响不大,位移变化均较小。     

Parallel machine scheduling with eligibility constraints: A composite dispatching rule to minimize total weighted tardiness

We study a parallel machine scheduling problem, where a job j can only be processed on a specific subset of machines M_j, and the M_j subsets of the n jobs are nested. We develop a two‐phase heuristic for minimizing the total weighted tardiness subject to the machine eligibility constraints. In the first phase, we compute the factors and statistics that characterize a problem instance. In the second phase, we propose a new composite dispatching rule, the Apparent Tardiness Cost with Flexibility considerations (ATCF) rule, which is governed by several scaling parameters of which the values are determined by the factors obtained in the first phase. The ATCF rule is a generalization of the well‐known ATC rule which is very widely used in practice. We further discuss how to improve the dispatching rule using some simple but powerful properties without requiring additional computation time, and the improvement is quite satisfactory. We apply the Sequential Uniform Design Method to design our experiments and conduct an extensive computational study, and we perform tests on the performance of the ATCF rule using a real data set from a large hospital in China. We further compare its performance with that of the classical ATC rule. We also compare the schedules improved by the ATCF rule with what we believe are Near Optimal schedules generated by a general search procedure. The computational results show that especially with a low due date tightness, the ATCF rule performs significantly better than the well‐known ATC rule generating much improved schedules that are close to the Near Optimal schedules. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 249–267, 2017     

带三维落角约束的寻的导弹制导与姿控系统设计

针对带三维落角约束的寻的导弹制导与姿态控制系统设计问题,提出一种基于终端滑模控制和扩张状态观测器的六自由度制导控制系统设计方法。建立包含模型不确定项的寻的导弹六自由度质心与绕质心模型,设计内外双层环路六自由度制导控制系统框架;基于弹-目三维相对运动模型和坐标系转移矩阵建立以攻角和侧滑角为输入的三维全耦合导引方程,利用终端滑模控制方法和扩展状态观测器得到期望的攻角和侧滑角并将其转化为对应的俯仰、偏航和滚转角指令;根据线性形式的寻的导弹绕质心动力学方程,设计与俯仰、偏航和滚转角相关的滑模面向量,并利用终端滑模控制方法和扩张状态观测器得到寻的导弹的副翼偏角、方向舵偏角和俯仰舵偏角指令。六自由度数值仿真结果验证了该方法的有效性和鲁棒性,并证明了该制导控制系统设计方法能以较少的控制设计参数完成预设的制导控制任务。     

平流层飞艇抗风场干扰约束Unscented卡尔曼滤波算法设计与应用

为了提高风场干扰环境下飞艇的导航精度,研究飞艇抗风场干扰导航算法。在建立风场干扰条件下飞艇速度误差约束模型的基础上,设计抗风场干扰的约束Unscented卡尔曼滤波算法。确定风场干扰条件下飞艇的速度误差约束量,将该约束与Unscented卡尔曼滤波算法相结合,对速度误差进行估计和补偿,以减小风场对飞艇定位精度的影响;证明该算法的状态估计量不仅是无偏的,而且协方差小于标准Unscented卡尔曼滤波的协方差;将提出的算法应用于捷联惯导/天文/合成孔径雷达组合导航系统中进行仿真验证,并与自适应扩展卡尔曼滤波和抗差自适应Unscented卡尔曼滤波算法进行比较。结果表明:提出的约束Unscented卡尔曼滤波算法的滤波性能明显优于自适应扩展卡尔曼滤波和抗差自适应Unscented卡尔曼滤波算法,能够有效抑制风场对飞艇定位精度的影响,提高飞艇的导航定位精度。     

Short‐term capacity allocation problem with tool and setup constraints

We consider a short‐term capacity allocation problem with tool and setup constraints that arises in the context of operational planning in a semiconductor wafer fabrication facility. The problem is that of allocating the available capacity of parallel nonidentical machines to available work‐in‐process (WIP) inventory of operations. Each machine can process a subset of the operations and a tool setup is required on a machine to change processing from one operation to another. Both the number of tools available for an operation and the number of setups that can be performed on a machine during a specified time horizon are limited. We formulate this problem as a degree‐constrained network flow problem on a bipartite graph, show that the problem is NP‐hard, and propose constant factor approximation algorithms. We also develop constructive heuristics and a greedy randomized adaptive search procedure for the problem. Our computational experiments demonstrate that our solution procedures solve the problem efficiently, rendering the use of our algorithms in real environment feasible. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

仿生机器人运动建模与控制研究进展

综述了几何方法在仿生机器人运动建模和控制中应用的最新成果,探讨了在统一框架下处理多种机器人运动问题的可行性.     

结合流形滤波的矩阵信息几何检测器

针对小样本、非均匀杂波下的信号检测问题,提出一种基于流形滤波的矩阵信息几何检测器,将信号检测问题转化为矩阵流形上的几何问题。将每一个样本的相关性数据建模为一个托普利兹正定矩阵,在此基础上,利用每一个样本数据的邻近矩阵进行加权平滑滤波,去除一部分杂波能量,提升目标与杂波间的区分性。计算了辅助样本数据对应矩阵的几何均值,通过比较待检测样本数据矩阵与几何均值矩阵之间的距离与检测门限的大小,以实现信号检测。实验结果表明,与自适应匹配滤波相比,本文方法在小样本、非均匀杂波下具有明显的性能优势。     

The minmax multidimensional knapsack problem with application to a chance‐constrained problem

In this paper we present a new combinatorial problem, called minmax multidimensional knapsack problem (MKP), motivated by a military logistics problem. The logistics problem is a two‐period, two‐level, chance‐constrained problem with recourse. We show that the MKP is NP‐hard and develop a practically efficient combinatorial algorithm for solving it. We also show that under some reasonable assumptions regarding the operational setting of the logistics problem, the chance‐constrained optimization problem is decomposable into a series of MKPs that are solved separately. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

考虑弹体动态特性的机动效率约束导引律

针对考虑交会角和过载约束导引律在大机动时能量损失大的问题,提出一种考虑导弹机动效率的多约束制导律。应用最优二次型原理推导出考虑一阶弹体延迟的时变导引系数闭环次优制导形式,将导弹机动时刻阻力系数引入时变权系数,并通过迭代确定机动效率约束边界。将时变约束表示成剩余时间与弹体延迟时间的函数,代入制导指令,进行弹道仿真。结果表明,对于常值与机动目标,文中制导律与过载约束导引律同只考虑交会角约束的导引律相比,对目标均能实现末端弹道成型要求,而考虑机动效率的制导指令分配更为合理,在避免指令加速度饱和的同时有效降低了拦截末端速度损耗,提高制导精度与毁伤效果。且该制导律中时变权系数无须配平求解,在保证精度的同时极大地提高了迭代速度。     

基于微分几何与李群的无人机编队会合方法

在领航-跟随编队模式下,设计了一种基于追缉策略的无人机编队会合方法。首先,基于微分几何曲线论和弗雷涅-塞雷标架建立了无人机非解耦三维运动模型,其中将曲率和挠率作为控制量;结合该模型给出了无人机三维编队会合问题的数学描述,它将导弹制导问题中的终端落角约束映射为编队会合问题中僚机的航迹倾角约束,同时引入额外的航迹方位角约束;然后使用特殊正交群的元素来度量长僚机方向偏差,并通过局部坐标映射将其映射为对应李代数空间中的旋量;接着,基于该旋量设计了编队会合几何导引律,并给出相应的曲率和挠率控制指令;最后,分别在长机稳定平飞和转弯机动条件下进行了多机编队会合数字仿真实验,仿真结果显示僚机能够有效地跟踪长机航向并收敛至指定位形,说明了方法的有效性。