破片模拟弹侵彻钢板的有限元分析

根据破片模拟弹侵彻钢板的实验研究,采用MSC.Dytran对破片模拟弹侵彻钢板的侵彻过程、侵彻特性、钢板的破坏模式以及弹体的侵彻速度、靶板的侵彻阻力进行了有限元分析,并将分析结果与实验结果进行了比较.分析结果表明,破片模拟弹冲击钢装甲的侵彻过程可大致分为初始接触、弹体侵入、剪切冲塞和穿甲破坏4个阶段.有限元分析的破片模拟弹侵彻特性及靶板破坏模式与实验观测结果有较好的一致性,在靶板破口的正面,与弹体平面凸缘两端接触的部分,变形以剪切为主,而与切削面接触的部分,以挤压变形为主;靶板破口背面为剪切冲塞破坏;有限元模拟的弹体剩余速度与实验结果吻合较好,弹体侵彻过程中弹靶作用界面的速度和侵彻速度近似呈线性变化.有限元分析结果还表明,采用适当的模型,有限元法能较好地模拟破片模拟弹侵彻钢板的侵彻过程、侵彻特性以及钢板的破坏模式.     

某型防空导弹杀伤概率评估

基于防空导弹战斗部爆炸后的杀伤特征,对战斗部爆炸后产生的有效破片、破片飞行速度、破片对目标的覆盖面积进行了分析,建立了防空导弹杀伤概率评估模型。采用仿真弹道数据,对打击目标F-16战斗机应用s im u link仿真工具绘出了杀伤概率曲线,其结果与实际分析相一致,验证了评估模型的可用性。     

The Armoury Gauging System and Interchangeable Manufacture

Abstract

Scientifically analysing important artefacts from the site of historic battles is vital if the best information is to be retrieved from the field. A detailed knowledge of the specific equipment that was available to the combatants from a known battle is also required at a high level so that artefacts and fragments resulting from an historic battlefield archaeological survey can be recognised when found. Access to specialists from all walks of life is required throughout each battlefield-related project, from the fieldwork stages to the dissemination of information. The following paper discusses the importance of working alongside museums and specialists and gives examples of how the Towton Battlefield Archaeology Project has successfully worked with the staff at the Royal Armouries Leeds.     

随动定向战斗部破片飞散特性研究

针对防空导弹常规破片式杀伤战斗部使用中存在能量利用率低的缺陷,提出采用随动定向战斗部的观点。建立随动定向战斗部的破片动态飞散区和飞散速度的计算模型,采用数值解析方法,解决在复杂弹目交会条件下破片的飞散区域与打击速度的计算问题．并用MATLAB软件对建立的模型进行验证,得出仿真结果与实际结果一致,这表明模型是合理、正确的。     

Real-time calculation of fragment velocity for cylindrical warheads

To simulate explosion fragments, it is necessary to predict many variables such as fragment velocity, size distribution and projection angle. For active protection systems these predictions need to be made very quickly, before the weapon hits the target. Fast predictions also need to be made in real time simulations when the impact of many different computer models need to be assessed. The research presented in this paper focuses on creating a fast and accurate estimate of one of these variables - the initial fragment velocity. The Gurney equation was the first equation to calculate initial fragment velocity. This equation, sometimes with modifications, is still used today where finite element analysis or complex mathematical approaches are considered too computationally expensive. This paper enhances and improves Breech’s two-dimensional Gurney equation using available empirical data and the principals of conservation of momentum and energy. The results are computationally quick, providing improved accuracy for estimating initial fragment velocity. This will allow the developed model to be available for real-time simulation and fast computation, with improved accuracy when compared to existing approaches.     

弹道冲击下层合板破坏模式及抗弹性能实验研究

以舰用轻型复合装甲研究为背景,针对不同纤维增强种类(包括玻纤织物 C400、C200、SW220 和芳纶纤维织物T750)以及不同面密度层合板结构,在6.2 g刚性微曲面柱形弹弹道冲击下的防护能力展开实验研究,着重讨论了层合板结构弹道冲击下破坏模式、弹体初始侵彻速度及面密度与抗弹能力和抗弹效率之间的关系,认为不同的破坏模式体现了不同的吸能特性和纤维失效机理.     

基于封闭爆炸的弹药破片空间分布研究

通过典型弹丸爆炸试验,研究封闭条件下破片的空间分布,提出了爆炸洞体防护的重点区域。试验表明:对于某型高弹丸,主要分布在以弹丸为爆炸中心的20°角的环状严重区域内;对于某型加弹丸,主要分布在以弹丸为爆炸中心的35°角的环状严重区域内。     

杀伤战斗部破片定向飞散特性研究

研究了钢预制破片壳体在四种装药爆轰驱动下的飞散特性。求得了使破片飞行路径呈平行型的预制破片壳体的临界半径及相应的破片初始速度。     

多点偏心起爆对破片速度增益的影响

多点偏心起爆后,爆轰波相互作用在定向区域内产生了马赫波超压,使得该区域破片速度产生增益.利用爆轰波反射理论,建立多点偏心起爆后爆轰波相互作用特性的理论模型,并确定定向区内破片速度的增益特性.3种不同起爆方式的仿真计算和静爆试验结果对比表明,定向区内不同起爆方式得到的破片增益程度较为吻合.     

高速/超高速碰撞效应研究

高速/超高速碰撞会产生大量破片,并伴随闪光、等离子体等现象.高速碰撞材料受冲击产生射流及破片高温会引起碰撞闪光现象,获得了碰撞等离子体电磁场强度的变化规律.采用数值仿真与理论分析相结合的方法,获得了高速碰撞破片云团分布规律.