指数型数据环境因子工程计算方法

在可靠性工程实践中,对于技术状态处于稳定期的产品,环境因子是对不同试验条件下的可靠性数据进行综合利用的重要参数。由于环境因子理论计算方法在工程应用中存在着很多问题,缺乏工程实用性,因而在可靠性工程中如何确定环境因子一直是个争议较多的问题。主要探讨了指数型数据环境因子的工程确定方法,在理论计算公式的基础上对可靠性试验数据进行了工程上的处理,由此获得的环境因子具备较强的工程实用性。     

城市消防远程监控系统建设过程中的几点体会

通过对国内自动消防设施设备存在问题的归纳,结合城市消防远程监控系统实际功能的实现,从监控终端、通信网络、信息中心三个方面提高系统的容错能力,阐述了实际建设和调试过程中的解决办法,并对系统的可靠性和安全性进行了讨论。     

军用航空发动机大修能力评估方法

针对航空发动机修理工厂大修能力难以评估的问题,提出了航空发动机大修能力评估方法。分析了航空发动机大修生产过程;根据航空发动机大修生产工作特点,建立了基于生产职能分解的航空发动机大修能力评估指标体系,构建出基于熵权和灰色聚类的评估指标赋权模型;结合实例验证了方法的正确性和实用性。     

成败型产品验收试验方案研究

在可靠性定型试验的基础上,利用多层贝叶斯方法确定批产品可靠性指标的先验分布,从而制定出成败型产品可靠性验收试验的一种贝叶斯方案.给出利用定型试验信息确定产品可靠性指标先验分布的方法.这种验收方法充分利用了产品定型试验中的先验信息,在确保有较好验收效果的前提下,与传统的验收试验相比,可以大大减少试验量,从而得到可观的经济效益.     

存在工作历程产品的加速寿命试验统计分析

加速寿命试验(ALT)可在较短时间内获得产品的寿命及可靠性信息.利用ALT对产品的剩余寿命进行评估时,常常将已工作过的产品进行抽样并投入试验,在这一类样本的ALT数据统计分析时如何处理初始工作时间,成为ALT应用中的一个重要问题.工程实际中评估此类样本的剩余寿命时常常忽略初始工作时间,将其视为"用后如新"或"无记忆性"产品.但此假设必须以产品寿命服从指数分布为前提,而大部分机电产品的寿命服从Weibull分布,因而该方法在应用时必然会产生较大误差.针对这一问题提出了一种新的基于时间折算的ALT数据统计分析方法,并利用Monte Carlo仿真对其估计特性进行对比研究,结果表明此方法能有效评估存在初始工作历程产品的剩余寿命,估计精度优于原方法.     

H2O2/HTPB固液混合发动机点火试验研究

利用H2O2催化分解原理,设计了烃类燃料在催化分解的90%H2O2中能燃烧的点火器,然后采用该点火器进行H2O2/HTPB固液混合发动机点火试验研究.试验结果表明,该点火器能够成功启动H2O2/HTPB固液混合发动机,且当混合比偏离最佳混合比后,发动机的燃烧效率降低.     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

A model for step‐stress accelerated life testing

Modern technology is producing high reliability products. Life testing for such products under normal use condition takes a lot of time to obtain a reasonable number of failures. In this situation a step‐stress procedure is preferred for accelerated life testing. In this paper we assume a Weibull and Lognormal model whose scale parameter depends upon the present level as well as the age at the entry in the present stress level. On the basis of that we propose a parametric model to the life distribution for step‐stress testing and suggest a suitable design to estimate the parameters involved in the model. A simulation study has been done by the proposed model based on maximum likelihood estimation. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

关于半鞅向量随机积分的两个结果

首先利用半鞅Girsanov定理与闭图像定理证明了:若{Xn}是带滤基的完备概率空间(Ω,F,F,P)中的一列半鞅,其中滤基F=(Ft)t≥0满足通常条件,且{Xn}在关于P的Emery拓扑空间中收敛于X,则当概率测度Q相似文献