采用遗传算法的弹托迎风窝结构设计

针对一体化弹丸弹托易分离性和轻质化的设计要求，构建弹托迎风窝参数化外形模型，基于激波和膨胀波理论建立弹托气动力计算模型；以弹托分离加速度和弹托质量综合最优为目标函数，采用遗传算法对弹托迎风窝的外形参数进行优化设计，从而得到弹托迎风窝的优化外形。以中口径尾翼稳定脱壳穿甲弹的弹托设计为例，采用提出的优化设计模型对其迎风窝结构进行优化设计，并采用基于动网格技术的弹托分离仿真模型验证其最优性。仿真结果表明：所提优化模型能够得到最优的弹托迎风窝结构；针对现有的中口径尾翼稳定脱壳穿甲弹，可进一步对其弹托结构进行优化，以提高其分离快速性。     

电磁发射弹丸飞行弹道仿真

针对电磁发射弹丸飞行弹道进行仿真研究，在建立刚体六自由度飞行弹道模型的基础上，采用时频分析和涡流分析方法，建立电磁-动力学耦合模型分析弹丸出膛时由于膛内振动带来的炮口扰动，采用动网格技术建立电磁-气动耦合模型分析弹托分离产生的气动扰动，从而得到了电磁发射弹丸的飞行弹道模型。以得克萨斯大学先进技术研究所设计的IAT-HVP为例，仿真分析了弹丸以1117 m/s初速、0°射角出膛时弹丸出口扰动对弹体速度和气动特性的影响，并得到其飞行200 m的弹道曲线。仿真结果表明，受电磁发射一体化弹丸出口扰动的影响，弹体落点相比理想弹道产生了24%的偏差，其中炮口扰动引起的偏差最大，其次是弹托分离。     

采用动网格技术的弹托分离仿真模型

针对一体化弹丸出炮口后弹托由与弹体接触到绕弹托质心做六自由度运动的过程,提出一种基于弹托分段分离运动并采用动网格技术耦合流体控制方程和六自由度运动方程的弹托分离仿真模型。以尾翼稳定脱壳穿甲弹为例,仿真分析不同马赫数下的弹托分离情况,并探讨弹托和弹体气动系数在分离过程中的变化情况。仿真结果表明:弹托分离马赫数越大,分离轨迹越靠近弹体且分离时间越短,但对地分离横向位移越大。通过与试验数据的对比,验证了所提弹托分离仿真模型的准确性。     

当代西方文化对中国青少年思想的影响

当代西方文化使青少年开拓了视野,形成了许多新的思想观念;同时,也误导了年轻人的生活态度、信仰、社会责任感等。对待西方文化,我国青少年应当在清晰的理解和认识的基础上,取其精华,去其糟粕。     

A critical look at the U.S. deceased‐donor organ procurement and utilization system

The U.S. system for procuring and utilizing deceased‐donor organs for transplantation has been studied and written about in many articles. The purpose of this paper is to examine the interactions between the elements that comprise this system, and point out improvement opportunities that may be affected through operations research/management techniques. The authors demonstrate the need for developing data‐driven and analytic tools. In fact, data is used to generate hypotheses and support claims throughout the paper. The paper also points out the need to fully leverage data that is available to researchers, and to seek data that is currently not deposited in a centralized archive.     

脱壳弹弹托分离的双目视觉测量

脱壳弹的弹托分离过程对弹体的飞行稳定性和打击效能具有显著的影响。针对脱壳弹出膛后弹托相对弹体的六自由度运动过程,提出采用基于双目视觉原理的弹托分离角测量方法。通过在弹体表面和弹托表面设置标记点,采用图像处理和跟踪算法实现对标记点的识别和跟踪。结合双目空间标定参数解算出标记点的空间位置,进而获得弹托相对弹体的分离角度,同时采用实验验证了上述测量方法的精度,其精度达到2%。以实验室进行的初速度1 550 m/s和1 750 m/s的脱壳弹射击试验为例,测量并分析了不同初速度下的弹托分离轨迹。结果表明:脱壳弹分离初速度越快,弹托分离轨迹越靠近弹体。     

大口径穿甲弹用材料应用研究动态及分析

为了提高穿甲弹的威力,有效对抗新型防护装甲和防护技术,对现有提高大口径穿甲弹穿甲威力的技术途径进行了分析,得出了弹芯材料和弹托材料的力学性能是制约穿甲威力提高的关键因素。详细阐述了目前国内外在大口径穿甲弹用弹芯材料的强韧化、绝热剪切敏感性,新型复合材料弹芯的研究和轻质弹托材料的应用研究动态,并对研究中存在的问题进行了分析。最后,对我国大口径穿甲弹用材料的研究工作进行了展望。     

某型穿甲弹弹托轻量化仿真研究

为了减小弹托消极质量,提高某型穿甲弹的威力,运用Ansys11.0软件的Workbench平台,采用瞬态动力学方法对某型穿甲弹的发射强度进行了仿真,结果表明:该弹弹托马鞍部和尾椎部的强度裕度较大。通过在马鞍部钻孔和尾椎部开槽,在满足发射强度要求的前提下可减轻弹托质量170 g,从而使该型穿甲弹的炮口初速提高了16.25 m/s,进而使该型穿甲弹对既定目标的有效穿透距离增加了270 m左右。     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.