流的大小与传输速率相结合的双门限检测算法

提出基于流传输速率与数据量的双门限检测算法。为满足高速网络传输的性能要求,使用Hash表存储流检测的数据结构,将Hash表的冲突处理与基于流速率的缓存替换相结合以实现高效的大流检测,通过限制Hash桶的容量,确保报文的处理性能。真实网络数据的仿真测试结果表明:所提算法在相近的存储开销下,保持了较高的处理性能,准确性优于基于最近最少使用算法的大流检测及其派生算法以及基于统计计数的紧凑型空间节省算法。     

靴形喷油速率耦合预喷射对超高压共轨柴油机性能的影响

在介绍超高压共轨系统工作原理的基础上,基于GT-Power软件建立单缸超高压共轨柴油机的仿真模型,并利用试验验证模型的准确性,而后通过模型分析不同喷油速率、靴形喷油速率耦合不同预喷油量和靴形喷油速率耦合不同预喷提前角对超高压共轨柴油机动力性、经济性以及燃烧排放特性的影响。结果表明:通过调整超高压共轨系统中电控增压器电磁阀和喷油器电磁阀的开启时间,能够实现喷油速率的柔性可调。随着喷油速率从矩形变化到靴形,柴油机缸内压力、温度以及NO_x排放量均逐渐降低,而soot排放量逐渐升高,且靴形喷油速率可使柴油机获得最大的功率(扭矩)和最低的油耗率。靴形喷油速率耦合较小的预喷油量可以使柴油机获得更好的动力性、经济性和燃烧特性,但同时也会导致NO_x排放量的升高。靴形喷油速率耦合较大的预喷提前角有助于改善柴油机排放特性,但受到预喷油量的限制,效果并不明显。     

A general model of heterogeneous system lifetimes and conditions for system burn‐in

Burn‐in is a technique to enhance reliability by eliminating weak items from a population of items having heterogeneous lifetimes. System burn‐in can improve system reliability, but the conditions for system burn‐in to be performed after component burn‐in remain a little understood mathematical challenge. To derive such conditions, we first introduce a general model of heterogeneous system lifetimes, in which the component burn‐in information and assembly problems are related to the prediction of system burn‐in. Many existing system burn‐in models become special cases and two important results are identified. First, heterogeneous system lifetimes can be understood naturally as a consequence of heterogeneous component lifetimes and heterogeneous assembly quality. Second, system burn‐in is effective if assembly quality variation in the components and connections which are arranged in series is greater than a threshold, where the threshold depends on the system structure and component failure rates. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 364–380, 2003.     

Burning rate and other characteristics of strontium titanate (SrTiO3) supplemented AP/HTPB/Al composite propellants

In a quest of search for a new burning rate modifier for composite propellant, strontium titanate (SrTiO₃), a perovskite oxide has been chosen for evaluation in a composite propellant formulation based on its other catalytic applications. Initially, SrTiO₃ was characterized for particle size, morphology and material/phase identification (using XRD). By varying SrTiO₃ content in a standard composite propellant, different compositions were prepared and their performance and processing parameters like the end of mix (EOM) viscosity, mechanical properties, density, burning rate, pressure exponent (n-value), etc. were measured. The results reveal that 2% SrTiO₃ causes more than 12% enhancement in propellant burning rate (at 70 ksc pressure) in comparison to the standard propellant composition. The pressure exponent also increases to 0.46, whereas the standard composition was having its value as 0.35.     

基于MGEKF的单站无源定位跟踪算法

单站无源定位跟踪技术具有隐蔽性强、设备简单,系统相对独立等优点,有着广阔的应用前景.为了提高定位精度和收敛速度以满足实时化需求,在现有的基于多普勒变化率的单站无源定位算法的基础上.详细推导了基于MGEKF的定位算法以解决EKF算法的不稳定性,并通过计算机仿真比较了两种算法的性能,结果表明MGEKF定位算法提高了定位精度、收敛速度和稳定度,定位结果能够满足实际需求.     

均匀设计在柴油无灰节能降污添加剂配方研制中的应用

基于低压氧弹燃烧法研究了充氧压力分别为0．6MPa和0．9MPa时两种无灰型柴油添加剂不同配比对助燃性能的影响。采用均匀实验设计和Matlab回归优化的方法，得到复配体系的最优配方，并对其进行了验证。结果表明，由Matlab回归分析得到的完全二次回归模型最理想，0．6MPa时由该模型得到的最优配方为：添加剂A和B的质量分数分别是0．300‰和0．700‰，并通过实验验证得到的发热量达到最大，变化率为8．697％。0．9MPa时，结合直观分析和回归分析，得到与实际相符的最优配方：添加剂A和B的质量分数分别是0．600‰和0．900‰，此时发热量皮化率为4．453％。     

A generic model of motor‐carrier fuel optimization

Fuel optimizers are decision models (software products) that are increasingly recognized as effective fuel management tools by U.S. truckload carriers. Using the latest price data of every truck stop, these models calculate the optimal fueling schedule for each route that indicates: (i) which truck stop(s) to use, and (ii) how much fuel to buy at the chosen truck stop(s) to minimize the refueling cost. In the current form, however, these models minimize only the fuel cost, and ignore or underestimate other costs that are affected by the models' decision variables. On the basis of the interviews with carrier managers, truck drivers, and fuel‐optimizer vendors, this article proposes a comprehensive model of motor‐carrier fuel optimization that considers all of the costs that are affected by the model's decision variables. Simulation results imply that the proposed model not only attains lower vehicle operating costs than the commercial fuel optimizers, but also gives solutions that are more desirable from the drivers' viewpoint. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

燃料电池AIP废气处理方案优选模型研究

对潜艇300 kW燃料电池几种可行的气体处理方案进行了对比分析,并运用模糊综合评判方法建立了方案优选模型.研究表明,应用旋转床吸收器吸收废气中的二氧化碳,并配以相应的水处理系统,将二氧化碳排至舷外的方案是最佳方案.     

基于实际案例的导弹装备战斗损伤评估

指出了基于实际案例的通用导弹装备战斗损伤评估内容及特点,提出了战斗损伤评估的量化标准,定义了战损率的概念;采用向量夹角余弦方法综合出了导弹装备各级组件的战损率及车辆的战损量化值,并通过实例证明了该方法具有所需信息量小、主客观综合性强、评估方法易于仿真实现等优点.     

固体火箭发动机二次喷射控制矢量喷管流场仿真

采用基于Favre平均的三维N-S方程和k-ε湍流模型对固体火箭发动机二次喷射推力矢量喷管复杂干扰内流场进行数值模拟。空间上采用三阶精度差分格式进行求解,时间上采用隐式Jacobi点迭代方法进行迭代推进,直至流场收敛。数值模拟得到矢量喷管二次射流的激波系结构,以及复杂的主/次流干扰流动图像。二次喷射流场包含复杂的涡系结构和波系结构,还存在着边界层与激波的相互干扰、自由剪切层、激波、膨胀波和大尺寸分离。数值模拟还表明,高温燃气射流导致喷射孔附近喷管壁面处的温度相当高,需采取相应的热防护措施。