DIP引脚应变分析

为了研究双列直插式元件在振动冲击环境下的可靠性,首先通过建立其物理模型,利用莫尔积分方法对引脚的变形进行分析,可以得到引脚任意位置的变形量;而后建立元件的实体模型,利用有限元方法对其应力应变进行仿真分析,结果表明在外载荷作用下,引脚是元件的薄弱环节,尤其在引脚与其他部位连接位置处易出现应力集中使其应变量较大,导致可靠性降低;最后进行振动冲击环境下的应变测量试验,在30 g的冲击载荷下,引脚的最大变形量可达66.47×10-6,在50 g的冲击载荷下,引脚的最大变形量可达173.95×10-6,在扫频过程中,当激振频率为146.48 Hz时,引脚的变形量最大。     

带内双频电磁辐射对频率步进连续波雷达的虚警干扰规律

为掌握带内双频电磁辐射对雷达的虚警干扰规律,以频率步进连续波雷达为研究对象,基于理论分析与效应试验,研究了虚警目标的电平变化规律、波形特征以及出现位置规律。结果表明:受试雷达在带内双频电磁辐射作用下,不考虑互调干扰时,至多产生两个位置随机的“山丘型”虚警目标,两者距离差与双频干扰频差有关。双频干扰中两分量互相压制,即当任一干扰分量强度恒定时,随着另一个分量的增强,前者形成的虚警目标电平缓慢下降,最终降速基本恒定,而后者形成虚警目标电平逐渐升高,直至电平恒定;若双频干扰信号两分量同比例增强,则两个虚警目标电平均在初期近似线性上升,而后增速逐渐降低至零。     

Dual‐ascent and primal heuristics for production‐assembly‐distribution system design

This article proposes two dual‐ascent algorithms and uses each in combination with a primal drop heuristic embedded within a branch and bound framework to solve the uncapacitated production assembly distribution system (i.e., supply chain) design problem, which is formulated as a mixed integer program. Computational results indicate that one approach, which combines primal drop and dual‐ascent heuristics, can solve instances within reasonable time and prescribes solutions with gaps between the primal and dual solution values that are less than 0.15%, an efficacy suiting it for actual large‐scale applications. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

Limiting cyberwarfare: applying arms-control models to an emerging technology

ABSTRACT

An arms race in cyberspace is underway. US and Western government efforts to control this process have largely been limited to deterrence and norm development. This article examines an alternative policy option: arms control. To gauge whether arms-control models offer useful lessons for addressing cyber capabilities, this article compiles a new dataset of predominantly twentieth-century arms-control agreements. It also evaluates two case studies of negotiated agreements that regulate dual-use technologies, the 1928 Geneva Protocol prohibiting chemical- and biological-weapon use and the 1944 Chicago Convention on International Civil Aviation. The analysis underscores the limits of norm development for emerging technologies with both civilian and military applications. It finds lessons for developing verifiable, international cooperation mechanisms for cyberwarfare in the regulatory model of international aviation. Conventionally, arms-control agreements take advantage of transparent tests or estimates of arms. To restrict cyberwarfare activities, experts and policy makers must adapt arms-control models to a difficult-to-measure technology at an advanced stage of development and use. Further investigation of international regulatory schemes for dual-use technology of similar diffusion and development to the internet, such as international civil aviation, is needed.     

Models of scientific and technological review for the Biological and Toxin Weapons Convention

ABSTRACT

Science and technology (S&T) review is key to anticipating developments in the life sciences that may benefit or run contrary to the aims of the 1972 Biological and Toxin Weapons Convention. It serves as a mechanism for both preparing against novel biological threats and identifying the best opportunities for developing and sharing the life sciences to the fullest extent. In the age of rapidly advancing biotechnology, S&T review needs to be wide ranging, involve a diverse set of inputs, and be transparent about its methods and data. This viewpoint considers four models of S&T review and their capacity to respond to the challenge of the life sciences: standing advisory boards; ad hoc working groups; peer review; and wikis. It then identifies a hybrid model that is suitably broad, diverse, and transparent.     

基于双重酉滤波的再入目标实时跟踪

适当的运动模型和估计方法是提高再入目标跟踪性能的关键.选择机动再入动力学模型,将再入目标跟踪问题转化为状态和参数的联合估计问题,并利用试验数据分析了再入模型状态和参数的相关性.针对原始双重酉滤波算法的确定性系统输入假设造成信息损失的局限性,提出了一种基于随机性系统输入假设的改进双重酉滤波算法,并从理论上分析了该算法的估...     

两点源干扰情况下数据积累点数对雷达测角精度的影响

两点源干扰是干扰被动雷达导引头 (PRS)的有效手段。但在实际应用中 ,两点源的功率不可能完全相等 ,这就为PRS对抗两点源的干扰提供了契机。通过理论分析和仿真实验证明 ,当两点源偏离导引头的电轴方向不大的情况下 ,只要保证足够的积累点数 ,导引头进行数据积累取均值 ,其结果并不指向两源的“重心”或“质心”而是指向两源中功率较大者 ,并给出了确定积累点数的解析表达式     

变量有界线性目标规划的对偶算法

本文讨论了变量有界的线性目标规划问题,给出了求解这类问题的一个对偶算法,此方法与变量有界线性规划问题的对偶算法相类似。文中证明了算法的有效性,并举例说明了计算过程。     

高强度热处理双相钢制绳线材研制

本文通过实验提出了一种双相钢制绳线材的热处理工艺程序,即:奥氏体化及水淬以获得全部马氏体组织→临界间加热淬火以获双相组织并回火→酸洗磷化后多道次连续冷拔至终尺寸→人工时效。按此程序生产的线材σ_b 可达1800MPa 以上,且扭转、弯曲疲劳性能超过标准规定值。     

矩阵变换器自抗扰控制策略研究

矩阵变换器的输出电压易受各种因素的影响,为了改善输出性能,将自抗扰控制技术应用于矩阵变换器的闭环控制中。分析了自抗扰控制器的特性,提出了一种双闭环自抗扰控制策略,即电流内环与电压外环均采用一阶简化的自抗扰控制算法。仿真结果表明:该方法不仅可以有效地抑制多种扰动的影响,而且比PI控制具有更优的动静态性能,可满足高性能矩阵变换器系统的控制要求。