磁流变液的摩擦与润滑

采用四球摩擦磨损试验机考察了羰基铁-矿物油体系磁流变液和基础油摩擦系数随时间的变化曲线、磨斑直径,用扫描电镜观察了磨痕表面形貌.结果表明,与基础油相比,磁流变液的摩擦加剧,润滑性能降低,磁性颗粒是导致其润滑性能下降的首要原因;摩擦磨损机理主要是磨粒磨损,表现为犁沟效应.     

引信全电子安全系统失效分析及评估

本文根据全电子安全系统的一般结构模式,分析了其安全性设计的一般特点和可能造成其失效的各种原因,并在此基础上建立了全电子安全系统的失效故障树,给出了失效概率的定量计算结果。     

变速传动轴承传动原理分析与研究

变速传动轴承是一种既具有支承功能又具有变速功能的新型特种轴承 ,其机构设计新颖紧凑 ,效率高 ,承载能力强。通过研究变速传动轴承的内部机构和传动原理 ,对其传动比做了深入系统的分析 ,得出了内齿圈齿数、活齿数与传动比之间的理论关系 ,并从理论上提出了高效率、低磨损的传动比优选方案 ,认为在推杆活齿传动机构设计时 ,应该使活齿数大于内齿圈齿数 ,即Z2 >Z1。包括变速传动轴承在内 ,对于采用了推杆活齿机构的各种活齿传动形式的结构设计 ,这个结论都具有重要的指导意义。     

扭轮摩擦驱动系统研究

扭轮摩擦驱动是集摩擦传动和螺旋传动为一体的传动系统,它既具有摩擦传动动态特性好,同时又有螺旋传动导程小的特点。本文介绍一种扭轮摩擦驱动系统,它的导程小于０．２ｍｍ,行程为２５０ｍｍ,运动分辨率可达纳米级水平。它由扭轮摩擦传动机构、气体静压导轨及相关部件组成,是一种大行程高分辨率的新型驱动系统。     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

解析美国大学TESL硕士培养的主要课程与设置理据——以曼卡托明尼苏达州立大学为例

把英语作为第二语言的教学是20世纪60年代在美国兴起并逐步走向独立的科目,它在综合相关专业的同时正在朝专业化方向发展。近年来其硕士层面的教育为全球培养了大量合格的中小学英语教师,取得了较好的成绩。本文以曼卡托明尼苏达州立大学英语系为例,并结合笔者在该系攻读TESL硕士学位时的经历,解析其主要课程及设置理据。     

(修，2撤3)关键几何参数对超声速膨胀器流场和性能影响的数值研究

为了揭示关键几何参数对超声速膨胀器流动特性影响的规律,对3种隔板安装角和5种出进口面积比超声速膨胀器设计工况下的流场进行了数值研究。结果表明：随隔板安装角增加,斜激波向出口迁移,斜激波强度略有降低,超声速膨胀器膨胀比减小,效率提高;随出进口面积比增加,流道内高速区显著扩大并逐渐靠近压力面,斜激波增强,出口流动损失增加,超声速膨胀器膨胀比增大,效率降低。为获得综合性能较优超声速膨胀器结构,需在较小出进口面积比和较大隔板安装角之间做折衷选择。     

电传动装甲车辆电源系统建模与仿真

电源系统是电传动装甲车辆的核心,对其进行建模与仿真研究具有重要意义。电源系统的非线性特性导致了建模困难、模型精度低以及模型实用性差等难题,针对不同的部件特性采取不同的方法建立其仿真模型,完成了基于模糊控制的系统多目标优化功率分配策略研究。并在此基础上进行了部件和系统两个层次的仿真试验,证明所建模型能够较好地反映电传动车辆电源系统的工作特性。