核动力装置人机系统可靠性数字仿真研究

对核动力装置人机系统进行了可靠性数字仿真研究,将人的因素和设备的安全性、可靠性、维护性及其它参数进行综合平衡,研制出可靠性较高的系统,并在其使用维护中获得最佳的有效性.     

核电站运行诊断系统探讨

根据国外核电站诊断系统的现状,简要叙述其基本组成及工作过程,分析了运行诊断系统在核动力方面的应用前景,提出了加强核电站运行诊断系统应用有效性的几个问题。     

Nuclear weapons and alliance institutions in the era of President Trump

The swearing in of Donald Trump as the 45th President of the United States presages, at the very least, a period of flux in American strategy with respect to the relationship between nuclear weapons and alliances. In this response to three thoughtful rejoinders to our article, “Nuclear weapons, the United States and alliances in Europe and Asia: Toward an institutional perspective,” we clarify key aspects of our argument and discuss why alliance institutions are likely to be relatively robust in the face of change, how they can influence national decision-making, and argue that they may exert a moderating influence over the new administration.     

Indian Military Modernization and Conventional Deterrence in South Asia

In recent years, headline grabbing increases in the Indian defense budget have raised concerns that India’s on-going military modernization threatens to upset the delicate conventional military balance vis-à-vis Pakistan. Such an eventuality is taken as justification for Islamabad’s pursuit of tactical-nuclear weapons and other actions that have worrisome implications for strategic stability on the subcontinent. This article examines the prospects for Pakistan’s conventional deterrence in the near to medium term, and concludes that it is much better than the pessimists allege. A host of factors, including terrain, the favorable deployment of Pakistani forces, and a lack of strategic surprise in the most likely conflict scenarios, will mitigate whatever advantages India may be gaining through military modernization. Despite a growing technological edge in some areas, Indian policymakers cannot be confident that even a limited resort to military force would achieve a rapid result, which is an essential pre-condition for deterrence failure.     

Missile Strategy in a Post-Nuclear Age

While the arrival of nuclear weapons coincided roughly with the development of short, medium, intermediate, and eventually intercontinental missiles, the contribution of missile technology to the deterrence equation is often lost. If nuclear weapons were eliminated, even new generation missiles with conventional payloads could struggle to render effective deterrence. But some of the physical and psychological effects commonly ascribed to nuclear weapons could still be in play. And in a world without nuclear weapons, thinking about the use and control of force from the nuclear age would also deserve renewed attention.     

相变储能材料十六醇-癸酸二元体系相变温度的测定

采用步冷曲线法测定了不同组成的十六醇-癸酸二元体系的相变温度,绘制了该体系的T-X相图,该体系为具有最低共熔点的二元体系,其最低共熔温度为常温,具有广泛的应用价值。     

基于复用技术的装备保障信息系统构架、构件研究

将软件复用技术应用于装备保障信息系统的开发,采用基于构件/构架的开发方法,加快系统开发速度,提高产品质量,并有利于维护和升级.     

Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy and maximum buckling load capacity

This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure. The design optimization study is conducted for cross-ply layups [0s/90t/0u], [0s/90t/0u]s, [0s/90t]s and [90s/0t]s considering three uni-directional composites, i.e. Carbon/Epoxy, Glass/Epoxy, and Boron/Epoxy. The optimization study is performed by coupling a Multi-Objective Genetic Algorithm (MOGA) and Analytical Analysis. Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study. The objectives of the optimization are achieved under constraints on the Tsai-Wu, Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor. To verify the optimization approach, optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.     

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis. This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior. Use of elastic moduli is eliminated. Instead, stress and strain functions are used as the material input in the analysis procedure. These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting. This way, the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior. It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results, easy to adopt and simple in calculations. The method eliminates all types of linearity assumptions in basic derivations of equations and hence, eliminates all types of possibility of errors in the analysis procedure as well. As it is required to know stress distribution in the structural body by proper modelling and structural idealization, the proposed analysis approach can be regarded as stress-based analysis procedure. Basic problems such as uniaxial problem, beam bending, and torsion problems are solved. It is found that approach is very suitable for solving the problems of fracture mechanics. Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated. The approach solves the fracture problem with relative ease in strength of material style calculations. For all problems, results are compared with the classical displacement-based liner theory.     

Identification of Pu and U isotopic composition and its applications in environmental and CBRN research

This paper describes the most common presently used methods for detecting uranium and plutonium isotopes after their introduction to environment. Known isotope ratios of U and Pu in different nuclear events are important tool for characterizing the sources of nuclear material. Detection techniques both in field and in laboratory are presented, as well as different models that can be used for identifying the origin and age of the nuclear material. Identification of the source of nuclear material in environmental samples is needed for estimating the quality and quantity of the nuclear hazard. This information is essential in risk assessment and crisis management, in chemical, biological, radiological and nuclear (CBRN) research after e.g. a terrorist attack, in radioecology and environmental radioactivity research.