一类反向混合单调算子方程组解的存在惟一性

运用锥与半序理论和非对称迭代方法,讨论半序Banach空间一类反向混合单调算子方程组解的存在惟一性,并给出了迭代序列收敛于解的误差估计,同时推广讨论了非反向混合单调算子方程组解的存在惟一性.所得结果改进和推广了混合单调算子方程某些已知的结果.     

超声速、高超声速球锥组合体表面压强估算方法及其应用

改进并推广了一种有效的球头单锥组合体在超声速和高超声速流动情况下的表面压力分布算法 ,并利用该算法对若干来流条件下球头双锥组合体表面的压力分布进行了计算。计算结果与数值计算结果以及文献实验数据的比较表明 :本文介绍的方法不失为一种适用范围较宽、准确程度较高的工程算法     

一类具变号非线性项和p-Laplacian算子的仇点·边值问题的多个正解

研究一类具Laplacian算子的m点边值问题（Ф（u＇））＇＋q（t）f（t,u）=0,0〈t〈1,u（0）=^m-2∑i=1aiu（ζi）,u＇（1）=βu＇（0）.利用锥上的不动点指数定理,对上述具有变号的非线性项的边值问题进行研究,得到多个正解存在的充分条件．     

一种含氧混合燃料喷雾特性的试验研究

针对柴油和所需的油料方案B20D10（即在柴油中掺混20%生物柴油和10%碳酸二甲酯,Dimethyl-Carbonate,DMC）,在某型重型车辆柴油机高压泵试验台上,采用定容弹和高速摄影技术,研究了掺混生物柴油和DMC后对燃油喷雾特性的影响。结果表明：在不同的背景压力下,燃料B20D10油束的贯穿距离低于柴油,最大降幅达到7.0%,锥角最大增加约15.2%;在非破碎阶段,燃料的贯穿距离与时间呈正比关系;在破碎阶段,贯穿距离与时间的关系为s∝tn,其中n约为0.57。试验结果为建立该混合燃料的喷雾模型,并进行缸内燃烧的数值模拟奠定了基础。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

随机布阵条件下同时数字多波束干扰优化设计方法

针对现有方法普遍存在的波束形成算法效率低、难以形成多频点多方向的同时多波束干扰、不适用于随机布阵条件下的波束形成等缺点,提出了一种基于二阶锥规划(SOCP,Second-Order Cone Programming)理论的同时数字多波束干扰形成方法。首先,给出了在随机布阵条件下干扰多波束优化设计问题的数学描述;其次,以范数准则为例,将随机布阵条件下干扰多波束设计问题的解析形式转化为相应的SOCP形式;再次,利用现有的原-对偶内点算法工具箱Se Du Mi或者CVX进行快速求解。最后,仿真结果表明该方法可以较好地解决随机布阵条件下的多频率多方向雷达目标同时多波束干扰优化设计问题。     

Constructing a strict total order for alternatives characterized by multiple criteria: An extension

The problem of finding a strict total order for a finite set of multiple criteria alternatives is considered. Our research extends previous work by us, which considered finding a partial order for a finite set of alternatives. We merge the preference information extracted from the preference cones and corresponding polyhedral sets, with the information derived from pairwise comparisons of two alternatives, yielding a preference matrix. This preference matrix is used as input to an integer programming model to obtain a strict total order that provides a transitive ranking for the set of alternatives. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 155–163, 2014     

一类m-点边值问题的正解

研究一类二阶m-点边值问题u″ f(t,u,u)′=0,00,i=1,…,m-2,ζi满足0=ζ0<ζ1<ζ2<…<ζm-2<ζm-1=1和i∑=1aiζi<1。应用推广的Krasnosel-skii′s不动点定理,给出了上述边值问题至少存在一个正解的充分条件。     

基于二阶锥规划的MIMO雷达稳健自适应波束形成

针对MIMO雷达自适应波束形成中期望目标导向矢量的失配问题,提出了一种基于二阶锥规划(SOCP)的稳健自适应波束形成算法。该算法首先将1个MN维(M,N分别为发射和接收阵元数)的权矢量分解成2个低维(1个M维和1个N维)权矢量的Kronecker积,然后分别限制实际的目标发射导向矢量和目标接收导向矢量与假定的导向矢量之间的误差范数的边界,通过优化最差性能,利用SOCP求得分解后的2个权矢量,最后再合成原权矢量。通过降维处理,算法在保证波束形成器性能的基础上,有效地降低了运算复杂度。仿真结果验证了算法的有效性。     

利用贫铀作药型罩提高破甲威力的可行性探讨

本文对目前常规破甲弹发展陷入低谷的原因进行了分析、找出了提高破甲威力的突破口,然后从材料、实验和理论角度对采用贫铀——U~(238)作药型罩提高破甲威力的可行性进行了研究。