| 多级膜水处理流量稳定性建模及仿真研究 |
| |
| 引用本文： | 王长海,宛西原,姚吉伦,陈志龙,何世彬,漆磊.多级膜水处理流量稳定性建模及仿真研究[J].后勤工程学院学报,2012(3):47-53. |
| |
| 作者姓名： | 王长海 宛西原 姚吉伦 陈志龙 何世彬 漆磊 |
| |
| 作者单位： | 后勤工程学院后勤信息工程系;后勤工程学院营房管理与环境工程系 |
| |
| 基金项目： | 重庆市科技攻关计划资助项目(CSTC,2008AA7012) |
| |
| 摘 要： | 多级膜水净化装置通过膜的过滤作用产生净水,而净水流量稳定性是该装置的性能评价要素之一。建立单级膜净水流量稳定性数学模型并将模型推广至多级膜,在Simulink环境下对多级膜模型进行仿真。结果表明,原水浊度越大,浓水阀门开度变化率越大、膜污染指数越小,净水流量越不稳定。实际净水实验表明仿真结论与实验结果相一致。通过调节浓水阀门开度对净水流量稳定性进行了控制分析,结果表明,浓水阀门开度以阶梯信号方式输入,可控制流量稳定系数在-1,1]变化,从而提高多级膜水净化装置的工作效率。
|
| 关 键 词： | 多级膜 净水流量 稳定性 Simulink |
Modeling & Simulation of the Output Stability of Clear Water Filtered by Multi-membrane |
| |
| WANG Chang-hai,WAN Xi-yuan,YAO Ji-lun,CHEN Zhi-long,HE Shi-bin,QI Lei.Modeling & Simulation of the Output Stability of Clear Water Filtered by Multi-membrane[J].Journal of Logistical Engineering University,2012(3):47-53. |
| |
| Authors: | WANG Chang-hai WAN Xi-yuan YAO Ji-lun CHEN Zhi-long HE Shi-bin QI Lei |
| |
| Institution: | 1(1.Dept.of Logistical Information Engineering,LEU,Chongqing 401311,China;2.Dept.of Barracks’ Management & Environmental Engineering,LEU,Chongqing 401311,China) |
| |
| Abstract: | Pure water is produced by the membrane in water filtering device,and the stability of pure water output is an important parameter to value the device.Stability model of pure water output of single membrane is set up and magnified to multi-membrane,and simulated in Simulink environment.The conclusion shows that pure water will be unsteady when raw water turbidity rises,changing speed of valve opening increases and pollution index declines.The simulation result is equal to the experiment result.The valve opening inputting by repeating sequence stair signal can control the pure water stability coefficient between-1 and 1.This method is simple to come true. |
| |
| Keywords: | multi-membrane pure water output stability Simulink |
| 本文献已被 CNKI 等数据库收录！ |
|
