首页 | 本学科首页   官方微博 | 高级检索  
   检索      

基于微分平坦的高超声速滑翔飞行器轨迹规划
引用本文:蔡伟伟,杨乐平,刘新建,朱彦伟.基于微分平坦的高超声速滑翔飞行器轨迹规划[J].国防科技大学学报,2014,36(2):61-67.
作者姓名:蔡伟伟  杨乐平  刘新建  朱彦伟
作者单位:航天科学与工程学院,航天科学与工程学院,航天科学与工程学院,航天科学与工程学院
基金项目:国家高技术研究发展计划(863计划)
摘    要:针对高超声速滑翔飞行器再入轨迹规划问题,提出了一种基于微分平坦理论的三自由度轨迹生成方法。在分析纵向运动简化模型的微分平坦属性基础上,将纵向参考轨迹规划问题映射到平坦输出空间,消除微分动力学约束的同时降低系统设计的维数,进而提高求解效率;采用全局插值多项式参数化平坦输出函数,将问题转换为非线性规划问题求解;设计比例-微分反馈控制律跟踪纵向参考轨迹,同时采用航向角误差走廊控制侧向运动,实现三自由度轨迹生成。仿真分析表明所提出的方法能够较快生成满足多种约束且性能优化的飞行轨迹。

关 键 词:滑翔飞行器  微分平坦  轨迹生成  全局插值
收稿时间:2013/5/28 0:00:00
修稿时间:8/8/2013 12:00:00 AM

Differential flatness based rapid trajectory planning for hypersonic glide vehicle
CAI Weiwei,YANG Leping,LIU Xinjian,ZHU Yanwei.Differential flatness based rapid trajectory planning for hypersonic glide vehicle[J].Journal of National University of Defense Technology,2014,36(2):61-67.
Authors:CAI Weiwei  YANG Leping  LIU Xinjian  ZHU Yanwei
Institution:College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China;College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China;College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China;College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China
Abstract:For the trajectory planning problem in hypersonic glide vehicle, a differential flatness based three-degree-of-freedom trajectory generation approach is proposed. Based on the flatness analysis of the simplified longitudinal motion model, the reference longitudinal trajectory planning problem was mapped into the flat output space to improve the solving efficiency by eliminating the dynamical constraints and reducing the design dimension. Then the initial problem was transformed into a nonlinear programming problem utilizing global polynomial approximations to the flat outputs. To compensate for the effects of the earth rotation and external disturbances, a Proportion-Differentiation control based reference trajectory tracking controller was designed with good convergence capability. By integrating the lateral motion determined by the error corridor of heading angle based bank angle revision, the three-degree-of-freedom gliding trajectory was ultimately generated. Numerical simulations were conducted to validate the feasibility and effectiveness of the approach presented here.
Keywords:glide vehicle  differential flatness  trajectory generation  global polynomial approximation  terminal sliding mode control
本文献已被 CNKI 等数据库收录!
点击此处可从《国防科技大学学报》浏览原始摘要信息
点击此处可从《国防科技大学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号