首页 | 本学科首页   官方微博 | 高级检索  
   检索      

Ni-P-SiC 化学复合镀
引用本文:李义和,傅圣利,王本根,王清华.Ni-P-SiC 化学复合镀[J].国防科技大学学报,2000,22(5):33-36.
作者姓名:李义和  傅圣利  王本根  王清华
作者单位:国防科技大学航天与材料工程学院,湖南长沙,410073
摘    要:采用化学共沉淀法对Ni P SiC化学复合镀研究 ,通过能谱仪和扫描电镜分析了镀层的组成与形貌 ,并对镀层的硬度、耐腐蚀性能进行了研究。结果表明 ,镀层硬度随SiC微粒浓度加大而增加 ;镀液中SiC微粒的浓度和镀液的pH值对镀层中SiC微粒的含量有影响 ;在SiC浓度为 7 5g/L时镀层中SiC含量达到最大值 1 6 81 % ;而pH值的最佳值为 4 7;同时 ,由于SiC微粒的加入 ,镀层表面色泽变暗 ,外观较粗糙 ,镀层的耐腐蚀性降低。

关 键 词:化学复合镀  SiC  耐腐蚀性  硬度
文章编号:100l-2486(2000)05-0033-04
收稿时间:1999/12/5 0:00:00
修稿时间:1999-12-05

Research of Ni-P-SiC Complex Chemical Plating
LI Yihe,FU Shengli,WANG Bengen and WANG Qinghua.Research of Ni-P-SiC Complex Chemical Plating[J].Journal of National University of Defense Technology,2000,22(5):33-36.
Authors:LI Yihe  FU Shengli  WANG Bengen and WANG Qinghua
Institution:LI Yi-he ,U Sheng-li ,WANG Ben-gen ,WANG Qing-hua (College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China)
Abstract:Ni P SiC complex chemical platings were investigated by chemical co deposition method. The composition and surface of the plate were analysized by XSP and SEM. The hardness and anti corrosive abilities were also studied at the same time . The results showed that the plates' hardness increased with the increase of SiC concentration in the plating solutions. SiC concentration of plates were greatly influenced by plating solution concentration and its pH value. SiC concentration of plates got its top value, 16.81%, while SiC concentration in the plating solution was 7.5g/L and plating solution' pH value was 4.7. However, the plates'surface became dim and rough, and the plates' anti corrosive abilities decreased.
Keywords:SiC  anti  corrosive abilities  hardness  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《国防科技大学学报》浏览原始摘要信息
点击此处可从《国防科技大学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号