| 反应法制备SiC涂层组成与结构 |
| |
| 引用本文： | 张玉娣,张长瑞,周新贵,曹英斌,李俊生.反应法制备SiC涂层组成与结构[J].国防科技大学学报,2005,27(1):16-19. |
| |
| 作者姓名： | 张玉娣 张长瑞 周新贵 曹英斌 李俊生 |
| |
| 作者单位： | 国防科技大学,航天与材料工程学院,湖南,长沙,410073 |
| |
| 基金项目： | 国家部委资助项目(41312011002) |
| |
| 摘 要： | 采用反应法在C/SiC复合材料表面制备SiC致密涂层,利用XRD分析涂层的组分及晶体结构,利用扫描电镜及金相显微镜观察涂层的断口及表面形貌,并对涂层形成过程进行了分析。结果显示:涂层主要由SiC及少量的游离Si组成,致密不开裂的SiC涂层与C/SiC复合坯体之间有很好的梯度过渡结构;相反,涂层与坯体之间如果没有形成过渡层,涂层会因热残余应力过大而开裂;反应法制备不开裂SiC涂层与CVDSiC涂层有很好的热匹配性,同时在其表面制备的CVDSiC涂层无点缺陷。
|
| 关 键 词： | 碳化硅涂层 反应法 微观结构 匹配 |
| 文章编号： | 1001-2486(2005)01-0016-04 |
| 收稿时间： | 2004/9/13 0:00:00 |
| 修稿时间： | 2004年9月13日 |
The Components and Structure of SiC Coating Fabricated by the Reaction Method |
| |
| ZHANG Yudi,ZHANG Changrui,ZHOU Xingui,CAO Yingbin and LI Junsheng.The Components and Structure of SiC Coating Fabricated by the Reaction Method[J].Journal of National University of Defense Technology,2005,27(1):16-19. |
| |
| Authors: | ZHANG Yudi ZHANG Changrui ZHOU Xingui CAO Yingbin and LI Junsheng |
| |
| Institution: | College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China;College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China;College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China;College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China;College of Aerospace and Materials Engineering, National Univ. of Defense Technology, Changsha 410073, China |
| |
| Abstract: | SiC coating is prepared successfully on C/SiC ceramic matrix composites by the reaction method. The phase structure and components of the coating are investigated by XRD. The profile and surface micrograph are observed by SEM and optical metallography microscopy,and the forming course of
SiC coating is analyzed. The result shows the main component of the coating is SiC and a little of Si. There is a good gradient structure and no obvious interface between the uncracked SiC coating and C/SiC substrate. On the contrary, if there were no gradient structure, the SiC coating would crack because of the great residual stress.The uncracked SiC coating prepared by the reaction method matched with CVD SiC coating excellently. At the same time,the CVD SiC coating fabricated on it has no dot defect. |
| |
| Keywords: | SiC coating reaction method microstructure match |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《国防科技大学学报》浏览原始摘要信息 |
| 点击此处可从《国防科技大学学报》下载免费的PDF全文 |
|
