| 非均匀焊接接头的力学建模与断裂分析 |
| |
| 引用本文： | 李永东,ZHANG Hong-cai,谭伟,ZHANG Nan.非均匀焊接接头的力学建模与断裂分析[J].装甲兵工程学院学报,2008,22(3). |
| |
| 作者姓名： | 李永东 ZHANG Hong-cai 谭伟 ZHANG Nan |
| |
| 作者单位： | 1. 装甲兵工程学院,机械工程系,北京,100072
2. 装甲兵工程学院,装备再制造工程系,北京,100072 |
| |
| 摘 要： | 建立了非均匀焊接接头"4区连接"的新模型,并利用积分变换-奇异积分方程的方法,研究了焊缝区的反平面断裂问题。数值计算表明:增大界面区的刚度或者适当地增大焊缝区、热影响区和界面区的宽度都有利于降低焊缝区裂纹的应力强度因子;相对于高匹配情形而言,低匹配焊接接头焊缝区的抗断裂能力明显较高。
|
| 关 键 词： | 非均匀焊接接头 界面区 焊缝区 匹配因子 应力强度因子 |
Mechanical Modeling and Fracture Analysis for a Non-homogeneous Weldment |
| |
| LI Yong-dong,ZHANG Hong-cai,TAN Wei,ZHANG Nan.Mechanical Modeling and Fracture Analysis for a Non-homogeneous Weldment[J].Journal of Armored Force Engineering Institute,2008,22(3). |
| |
| Authors: | LI Yong-dong ZHANG Hong-cai TAN Wei ZHANG Nan |
| |
| Institution: | 1.Department of Mechanical Engineering; Academy of Armored Force Engineering; Beijing 100072; China; 2. Department of Equipment Remanufacture Engineering; 3. Department of Fundamental Courses; China); |
| |
| Abstract: | A new four-zone model is established for a non-homogeneous weldment. The methods of integral transform and singular integral equation are employed to solve the problem of an anti-plane crack located in the weld metal interfaces. It is indicated by numerical computation that to enhance the stiffness of the interfacial zone and to increase the sizes of the weld metal, the heat affected zone and the interfacial zone are all beneficial to the reduction of the stress intensity factor of the weld-metal crack.The ... |
| |
| Keywords: | non-homogeneous weldment interfacial zone weld metal zone match factor stress intensity factor |
| 本文献已被 维普 万方数据 等数据库收录！ |
