首页 | 本学科首页   官方微博 | 高级检索  
   检索      

基于动力学分析和模糊综合评判的变速箱测点配置
引用本文:赵丰文,冯辅周,戴耀,司爱威.基于动力学分析和模糊综合评判的变速箱测点配置[J].装甲兵工程学院学报,2010,24(4).
作者姓名:赵丰文  冯辅周  戴耀  司爱威
作者单位:装甲兵工程学院,机械工程系,北京,100072
摘    要:针对变速箱状态检测与故障诊断过程中状态信息获取的测点位置基本靠经验设定,缺少理论支持,导致检测准确性和可靠性不高的问题,在建立变速箱箱体的有限元分析模型的基础上,进行了箱体的约束模态分析,根据模态位移"取大优先"的原则初选10个测点,然后采用模糊综合评判的方法,将测点优化问题转化为方案优选问题处理,提出了变速箱箱体模态实验的测点优化配置方案。结果表明:采用动力学分析和模糊综合评判相结合的方法进行测点优化选择,得到了科学合理的测点优化配置方案。

关 键 词:变速箱  测点优化  模糊评判  有限元

Gearbox Optimum Placement of Sensor Based on Dynamics Analysis and Fuzzy Comprehensive Evaluation
ZHAO Feng-wen,FENG Fu-zhou,DAI Yao,SI AI-wei.Gearbox Optimum Placement of Sensor Based on Dynamics Analysis and Fuzzy Comprehensive Evaluation[J].Journal of Armored Force Engineering Institute,2010,24(4).
Authors:ZHAO Feng-wen  FENG Fu-zhou  DAI Yao  SI AI-wei
Institution:ZHAO Feng-wen; FENG Fu-zhou; DAI Yao; SI AI-wei(Department of Mechanical Engineering; Academy of Armored Force Engineering; Beijing 100072; China );
Abstract:In the condition detection and fault diagnosis of gearbox,placement of sensor usually is set by experiment,which is short of theory support,so the detection accuracy and reliability is not sufficient.Aiming at this problem,finite element model of gearbox case is set up.Based on constrained modal analysis,ten placements of sensor are selected as initial scheme in principle of greatest priority.Fuzzy comprehensive evaluation method is used in scheme optimum selection,and placement of sensor is optimized in mo...
Keywords:gearbox  optimum placement of sensor  fuzzy comprehensive evaluation  finite element method
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号