首页 | 本学科首页   官方微博 | 高级检索  
   检索      

摩擦条件对纳米铜润滑添加剂减摩性能影响的研究
引用本文:刘谦,徐滨士,许一,史佩京,于鹤龙.摩擦条件对纳米铜润滑添加剂减摩性能影响的研究[J].装甲兵工程学院学报,2004,18(1):84-86.
作者姓名:刘谦  徐滨士  许一  史佩京  于鹤龙
作者单位:装甲兵工程学院装备再制造技术国防科技重点实验室,北京,100072
基金项目:国家重点基础研究发展计划(973计划),国家重点科技创新项目,国家自然科学基金
摘    要:研究了摩擦速度、载荷和摩擦表面处理方式等摩擦条件,对纳米铜润滑添加剂减摩性能的影响,发现摩擦速度较高时,载荷增加使摩擦因数明显降低;在低载荷时摩擦速度的减小,使摩擦因数降低了17%,载荷增大后摩擦速度的变化,对摩擦因数的影响减小.摩擦表面抛光处理,使摩擦因数降低为磨削处理时的74%.

关 键 词:摩擦条件  纳米铜  添加剂  减摩性能
文章编号:1672-1497(2004)01-0084-03
修稿时间:2003年12月18

On Effects of Friction Condition on Lubricant Performances of Nano-Cu Lubricating Additives
LIU Qian XU Bin-shi XU Yi SHI Pei-jing YU He-long.On Effects of Friction Condition on Lubricant Performances of Nano-Cu Lubricating Additives[J].Journal of Armored Force Engineering Institute,2004,18(1):84-86.
Authors:LIU Qian XU Bin-shi XU Yi SHI Pei-jing YU He-long
Institution:LIU Qian XU Bin-shi XU Yi SHI Pei-jing YU He-long
Abstract:The effects of friction conditions, such as friction velocity, load and treatment method of friction surface on the lubricant performances of nano-Cu lubricating additives are studied. The results showed the friction coefficient was reduced with a higher friction velocity when the load increased. The friction coefficient was reduced 17% when the velocity decreased with light load and the changes became indistinct with heavier load. The friction coefficient of the polish surface was 74% of that of grind surface.
Keywords:friction condition  nano-Cu  additives  lubricant performance
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号