| 超音速等离子制备Al/Ni涂层的性能特点 |
| |
| 引用本文： | 郭永明,王海军,谢兆钱,李绪强.超音速等离子制备Al/Ni涂层的性能特点[J].装甲兵工程学院学报,2010,24(4). |
| |
| 作者姓名： | 郭永明 王海军 谢兆钱 李绪强 |
| |
| 作者单位： | 装甲兵工程学院,装备再制造技术国防科技重点实验室,北京,100072 |
| |
| 基金项目： | 国防科技重点实验室基金资助项目 |
| |
| 摘 要： | 以超音速等离子喷涂系统(HEPJet)为平台,采用铝包镍(Al/Ni)自粘结粉末,借助Spray Watch2i在线监测系统、扫描电子显微镜(SEM)、X射线衍射仪(XRD)和WE-10A万能拉伸试验机,研究了超音速等离子喷涂Al/Ni粒子的速度、温度及涂层的组织性能。研究结果表明:超音速等离子喷涂Al/Ni自粘结粉末时,与普通火焰喷涂不同,射流中无明显的放热反应特征,涂层中也未发现Al-Ni化合物;超音速等离子的喷涂功率、喷涂距离等参数对Al/Ni喷涂粒子的状态和涂层组织性能影响显著,当功率为54.6kW、喷涂距离为150mm时,Al/Ni涂层组织致密,与基体的结合强度高达56MPa。
|
| 关 键 词： | 超音速等离子喷涂 Al/Ni自粘结粉末 喷涂功率 喷涂距离 组织性能 |
Characteristic of Supersonic Plasma Spraying Al/Ni Coatings |
| |
| GUO Yong-ming,WANG Hai-jun,XIE Zhao-qian,LI Xu-qiang.Characteristic of Supersonic Plasma Spraying Al/Ni Coatings[J].Journal of Armored Force Engineering Institute,2010,24(4). |
| |
| Authors: | GUO Yong-ming WANG Hai-jun XIE Zhao-qian LI Xu-qiang |
| |
| Institution: | GUO Yong-ming; WANG Hai-jun; XIE Zhao-qian; LI Xu-qiang(National Defense Key Laboratory for Remanufacturing Technology; Academy of Armored Force Engineering; Beijing 100072; China); |
| |
| Abstract: | Al/Ni coatings are prepared with the supersonic plasma spraying system.Al/Ni particles velocity,temperature and coatings performance are studied with the online test system of Spraywatch-2i,SEM,XRD and WE-10A.The results show that compared with the normal flame spraying process,no exothermic reaction is found in the supersonic plasma jet and no Al-Ni intermetallic compounds in the coatings.Al/Ni coatings performance and particles state are influenced by arc power and spraying distance obviously.With 54.6 kW... |
| |
| Keywords: | supersonic plasma spraying Al/Ni self-bonded powder spray power spray distance coatings performance |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
