基于BP神经网络的装备故障诊断专家系统研究

分析了神经网络和专家系统的特点,提出了基于BP神经网络与专家系统结合的某装备的故障诊断方法,构造了BP神经网络的装备故障诊断专家系统的诊断模型,克服了传统专家系统在知识获取和表达的薄弱环节,并用了某型装备的故障实际数据进行了验证,结果表明了神经网络与专家系统结合是一种有效的诊断方法。     

流形上的状态反馈控制策略

在流形上研究非线性系统的反馈镇定问题 ,针对线性化系统存在不可控不稳定子空间和不可控中心子空间几种情形 ,提出通过构造中心流形的控制策略 ,使线性化系统变为完全可控系统 .给出的系列定理表明 :①在线性化系统完全可控条件下 ,线性多输入反馈控制足可以使非线性系统镇定于原点 ;若原点为双曲的 ,则单输入线性控制是足够的 ;②线性化系统部份可控时 ,若不可控子空间是不稳定子空间 ,则存在中心流形控制器 ,使系统在原点邻域的平衡点上变为完全可控系统 ;若不可控子空间是中心子空间 ,则既可以通过中心流形将系统反馈镇定于原点 ,又可以重新构造中心流形使系统在原点的邻域内变为完全可控系统 ;③将存在不可控单零特征根的系统镇定于原点 ,构成了控制器的设计算法 .     

装备集群预防性维修计划的粒子群仿真优化

针对同类装备构成的集群预防性维修计划问题,综合考虑了装备的使用和维修过程,分析了装备动用与维修计划之间的相互关系,刻画了装备使用和维修的触发机制,提出了一个包含离散事件仿真和粒子群优化算法的混合模型,并描述了模型的结构和数学表示。该模型基于离散事件仿真对给定的预防性维修计划进行评估,并以该评估值为基础利用粒子群演化进行优化,从而通过多次迭代进化可逐步逼近可能的全局优化结果。由于模型中考虑了装备使用过程中的不确定性,并且粒子群优化可从任意初始值开始,因而可用作维修系统效能评估以及维修方案优化的决策工具。     

基于仿真推演的导弹作战实验框架分析与设计

针对导弹武器论证设计高成本、高复杂度的问题,本文梳理了导弹作战实验设计服务的多种功能需求,阐述了导弹作战实验设计的数理方法;为构建具有较好柔性的导弹作战实验仿真框架,针对导弹系统多个性能指标,辨析了各类导弹作战实验仿真变量;针对作战实验中的环境和装备特性,梳理了导弹作战实验模型体系,提出了仿真新模型开发框架;结合导弹作战实验案例,构建了实验设计优化方法,提出了作战实验检验设计方案;从运行实验出发,阐述了设定作战想定、建立控制机制、开展结果分析等仿真环节的具体设计。通过这些工作,形成了一种支撑导弹作战实验的柔性仿真框架,为进一步开展基于仿真推演的导弹作战实验提供参考。     

黏弹性基底上阻尼碳纳米管的动力学特性

采用欧拉梁模型建立了有阻尼碳纳米管在黏弹性基底上的动力学问题分析模型。通过引入非局部理论、广义Maxwell黏弹性模型、速度相依的外阻尼模型及黏弹性基底模型推导出碳纳米管动力学分析的欧拉梁振动控制方程。在Kelvin-Voigt黏弹性模型基础上,分别给出无基底和全基底支撑时碳纳米管固有频率的一般解析表达式,并分析讨论全基底时的多种典型情况。然后利用传递函数方法求解出一般边界条件下振动控制方程的封闭解。以某单壁碳纳米管为例,得到不同边界条件下该单壁碳纳米管的前四阶固有频率,并分析了碳纳米管非局部参数、黏弹性参数、基底刚度及长度等影响因素对固有频率和阻尼因子的影响情况。结果表明,文中所建的动力学分析模型及计算方法对解决碳纳米管在黏弹性基底上的动力学问题准确有效。     

Optimal schedules for special structure flowshops

This paper considers the problem of scheduling a given number of jobs on a specified number of machines in a flowshop where the objective function is to minimize the total throughput time in which all jobs complete processing on all machines. Based on the combinatorial analysis of the problem, several simple algorithms are developed for solving special structure flowshop scheduling problems where the process times are not completely random, but bear a well-defined relationship to one another. The proposed algorithms are both simple and computationally efficient and can optimally solve large-sized problems even with manual computational devices.     

集成运算放大器的误差分析与补偿方法

本文从应用角度出发,对集成运算放大器主要参数引起的运算误差,进行了深入的研究。在分析方法上采用先研究单项参数对误差的影响,然后对各单项误差进行综合,得到一般表达式。最后,给出明确的结论和补偿方法。     

某型火炮制退机节制环磨损故障分析与处理

制退机的性能好坏直接关系到火炮作战效能的发挥。针对目前装备保障方式大多停留在维修层面而理论研究不够深入的实际,对节制环磨损故障的机理进行分析。以某型火炮短节制杆式制退复进机为对象,利用MATLAB数值计算平台,编程仿真节制环磨损故障对后坐的影响。同时探讨了故障后对火炮的处理方案。研究表明,节制环磨损对后坐诸元都将产生不同影响,针对影响的程度可制定相应的故障处理方案。仿真模拟和方案探讨对装备保障工作具有参考意义。     

A squared-euclidean distance location-allocation problem

This article is concerned with the analysis of a squared-Euclidean distance location-allocation problem with balanced transportation constraints, where the costs are directly proportional to distances and the amount shipped. The problem is shown to be equivalent to maximizing a convex quadratic function subject to transportation constraints. A branch-and-bound algorithm is developed that utilizes a specialized, tight, linear programming representation to compute strong upper bounds via a Lagrangian relaxation scheme. These bounds are shown to substantially dominate several other upper bounds that are derived using standard techniques as problem size increases. The special structure of the transportation constraints is used to derive a partitioning scheme, and this structure is further exploited to devise suitable logical tests that tighten the bounds implied by the branching restrictions on the transportation flows. The transportation structure is also used to generate additional cut-set inequalities based on a cycle prevention method which preserves a forest graph for any partial solution. Results of the computational experiments, and a discussion on possible extensions, are also presented.     

An operator theory of parametric programming for the generalized transportation problem: II Rim,cost and bound operators

This paper investigates the effect on the optimum solution of a capacitated generalized transportation problem when certain data of the problem are continuously varied as a linear function of a single parameter. First the rim conditions, then the cost coefficients, and finally the cell upper bounds are varied parametrically and the effect on the optimal solution, the associated change in costs and the dual changes are derived. Finally the effect of simultaneous changes in both cost coefficients and rim conditions are investigated. Bound operators that effect changes in upper bounds are shown to be equivalent to rim operators. The discussion in this paper is limited to basis preserving operators for which the changes in the data are such that the optimum bases are preserved.     

装备故障诊断和预测技术综述

结合故障诊断与预测技术的国内外研究现状,综述了故障诊断和预测的完整性认知模型,并以此对蓬勃发展的故障诊断和故障预测技术进行了分类与综合分析。同时针对故障的不确定性特征,对故障诊断和预测技术的性能要求、定量评价与验证方法进行了分析。最后,分别从实际应用及扩展的四个方面提出了故障诊断、预测,以及PHM技术未来发展的几个问题。     

一种基于双目视觉原理的飞机尾旋运动姿态测量方法

针对飞机尾旋运动研究中的姿态测量问题,提出一种基于双目立体视差原理的测量方法.通过两部相机拍摄图像的视差,恢复模型表面特征空间三维信息,由表面特征计算模型运动姿态.设计了一组有特定形状和严格尺寸的人工特征,具有识别正确率高、定位精确等特点.提供人工特征的设计方法.最后,分别给出旋转天平实验和风洞实验的实测数据,实测结果表明该方法测量准确,鲁棒性好,在立式风洞飞机模型尾旋运动测量的应用中十分有效.     

Economic impact and the notion of compensated procurement

The paper consists essentially of two parts. In the first part a linear economic impact model is presented whose structure is based on subcontracting flows. The structural coefficients are defined in terms of flows per area. The model is derived from two identities that are analogous to the income and expenditure identities of national income accounting. The parameters are prime contracts and when one or several of the prime contracts are changed, the model determines the impacts of such changes on the various regions that have been selected. The impacts can be combined with regional multipliers to derive changes in regional income and regional employment. Fragmentary data for this kind of model have been collected on a one-time basis by DOD in 1965 and some results based on the data are presented. The second part of the paper is concerned with normative economics. A scheme is suggested, called compensated procurement, that outlines how the Department of Defense might employ the impact model in a macroeconomic setting. The basic idea is that a stabilization fund be established to finance an array of potential projects which are contracted for to balance sudden shifts in defense demand. Only short-run stabilization is advocated.     

基于重力加速度的自对准算法在摇摆台上的验证

摇摆基座条件下陀螺和加速度计测量的地球自转角速度和重力加速度受到了摇摆运动的干扰,无法根据陀螺和加速度计的输出直接获得初始姿态矩阵。针对这一问题,通过验证实验证明了基于重力加速度的对准算法的有效性,并依据实验结果从理论上对该方法的对准误差进行了分析,提出了进一步提高对准精度的措施。     

引入块内码元频数抽样的块内频数检测识别方案

为识别链路层比特流是否加密,以未加密与加密数据在随机统计特性上的差异为依据,利用随机性检测的方法对加密比特流进行识别.在不同比特流长度条件下对3种典型随机性检测方法的识别率进行了比较研究.针对3种检测方法均对长度较短的未加密比特流识别率较低的问题,在块内频数检测的基础上,提出了基于块内码元频数抽样的比特流预处理方案,以及块内频数检测最优分块长度选择方案,并对预处理方案对识别率的影响进行了分析.实验结果表明,提出的方案可以显著提高块内频数检测对未加密比特流的识别率.     

Insurance type item provisioning guidelines

Policy decisions for insurance type items, where zero or one unit is maintained at the depot, are more difficult and more critical than decisions for common supply items. This report presents results of developing initial provisioning guidelines for insurance type items. The guidelines are based on examination of lifetime costs and benefits. Costs of stocking an item as compared with not stocking are developed through a sinking fund annual payment formulation. Benefits of stocking are developed as stationary reduction in time weighted backorders experienced. A resource allocation formulation yields an optimal policy for allocating a fixed budget. The guideline is presented with refinements based on a sample of items. A figure of merit is calculated for each item, and if it is large the item is stocked while if small it is not stocked. Empirical definitions for large and small are developed based on sample data. Estimation techniques are discussed for deriving all of an item's parameters needed to compute its figure of merit. A Bayes procedure is suggested based on family group Experienced Demand Replacement Factors. This and other techniques are discussed.     

Optimal scheduling of objects in circulating systems

A “circulating system” is a finite collection of objects, each of which is oscillaling between two states. The prototype system is that of ships on patrcl,each subject to a quasi-regular “duty-service” cycle. There are various restrictions on the time spent in either state by an object and on the number of objects in a state at any one time. Schedules are sought in which the total number in one state is as large and as constant as possible. The maximal average number in one state is calculated, and a necessary and sufficient condition is given for a schedule to achieve it. Procedures are developed for constructing a schedule which achieves the maximal average in the most constant manner.     

论部队院校学报编辑的基本素质

部队院校学报同地方高等院校学报一样,是教学和科研的理论园地,是展示该校教学和科研水平的窗口。其质量高低,直接关系到该校的学术和科研工作水平。因此,部队院校的编辑工作者,在政治修养、理论知识、专业水平、语言文字等方面要具有较深的造诣,以强烈的责任感和高度的精品意识完成编辑工作。     

武器-目标分配(WTA)问题研究进展

对武器-目标分配(WTA)问题的研究现状与进展进行了总结与述评.介绍了WTA问题的概念、基本模型、数学性质以及WTA问题研究的基本内容.目前WTA问题的研究内容主要集中在模型研究与算法研究两个方面.模型研究以静态模型的研究为主,但动态模型的研究还不够深入;算法研究则主要采用智能算法对WTA问题进行求解.目前基本上已经解决了小规模的静态WTA问题,但尚未有效解决大规模的动态WTA问题.     

基于转盘爬虫法的雷达地形遮蔽盲区快速计算

为解决飞机在低空突防过程中的雷达地形遮蔽盲区快速计算问题,提出了一种基于转盘爬虫对象的快速算法。首先介绍了雷达盲区产生的因素,分析了地形遮蔽和地球曲率盲区的计算模型,然后定义了转盘及爬虫对象,并设计了基于转盘爬虫对象的地形遮蔽盲区计算方法和流程。在此基础上,将雷达地形遮蔽盲区计算结果进行三维建模及可视化,通过典型算例对算法进行对比测试和实验,得到不同高度的雷达地形遮蔽盲区分布图及三维可视化模型,证明了算法的快速性和可行性。