Sole sourcing versus dual sourcing under stochastic demands and lead times

The use of a single vendor for each inventoried item is usually assumed in most of the inventory models. However, there are situations where the use of more than one vendor should be considered, especially when lead times are stochastic. This research presents a theoretical investigation of the effect of cost structures on the relative performance of sole-sourcing versus dual-sourcing inventory control policies. We show that except for cases where the ordering cost is high, the lead-time variability is low, or the customer service level is low, dual sourcing performs better than sole sourcing under the normally distributed demand and shifted-exponential lead times. Moreover, the computational results indicate the dual sourcing provides a better service level than sole sourcing at the optimal solutions, and that dual sourcing results in larger order quantities than sole sourcing, which suggests that attractive quantity discounts may not be in jeopardy when dual sourcing is employed. Finally, because it is generally known that multiple sourcing can enhance the competition among suppliers, material managers should consider splitting purchase orders when two equally qualified suppliers are available. © 1994 John Wiley & Sons, Inc.     

Dual sourcing: Responsive hedging against correlated supply and demand uncertainty

This article analyzes dual sourcing decisions under stochastically dependent supply and demand uncertainty. A manufacturer faces the trade‐off between investing in unreliable but high‐margin offshore supply and in reliable but low‐margin local supply, where the latter allows for production that is responsively contingent on the actual demand and offshore supply conditions. Cost thresholds for both types of supply determine the optimal resource allocation: single offshore sourcing, single responsive sourcing, or dual sourcing. Relying on the concept of concordance orders, we study the effects of correlation between supply and demand uncertainty. Adding offshore supply to the sourcing portfolio becomes more favorable under positive correlation, since offshore supply is likely to satisfy demand when needed. Selecting responsive capacity under correlated supply and demand uncertainty is not as straightforward, yet we establish the managerially relevant conditions under which responsive capacity either gains or loses in importance. Our key results are extended to the broad class of endogenous supply uncertainty developed by Dada et al. [Manufact Serv Operat Mange 9 (2007), 9–32].© 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

Ordering policies for an inventory system with three supply modes

This article explores ordering policies for inventory systems with three supply modes. This model is particularly interesting because the optimal ordering decision needs to balance the inventory and purchase costs, as well as the costs for earlier and later periods. The latter cost trade-off is present only in inventory systems with three or more supply modes. Therefore, the result not only offers guidelines for the operation of the concerned inventory systems, but also provides valuable insight into the complex cost trade-offs when more supply modes are available. We assume that the difference between the lead times is one period, and the inventory holding and shortage costs are linear. We analyze two cases and obtain the structure of the optimal ordering policy. Moreover, in the first case, explicit formulas are derived to calculate the optimal order-up-to levels. In the second case, although the optimal order-up-to levels are functions of the initial inventory state and are not obtained in closed form, their properties are discussed. We also develop heuristic ordering policies based on the news-vendor model. Our numerical experiments suggest that the heuristic policies perform reasonably well. © 1996 John Wiley & Sons, Inc.     

Strategic investment to reduce setup times in the economic lot scheduling problem

This article considers the Economic Lot Scheduling Problem where setup times and costs can be reduced by an initial investment that is amortized over time. The objective is to determine a multiple-item single facility cyclic schedule to minimize the long run average holding and setup costs plus the amortized investment. We develop a lower bound on the long run average inventory carrying and setup costs as a function of the setup times, and show that this lower bound is increasing concave on the setup times when the out-of-pocket setup costs are zero or proportional to the setup times. We then develop a model that may be helpful in deciding the magnitude and the distribution of a one-time investment in reducing the setup times when the investment is amortized over time. Numerical results based on randomly generated problems, and on Bomberger's ten item problem indicate that significant overall savings are possible for highly utilized facilities. Most of the savings are due to a significant reduction in the long run average holding cost. © 1995 John Wiley & Sons, Inc.     

The dynamic transshipment problem

We investigate the strategy of transshipments in a dynamic deterministic demand environment over a finite planning horizon. This is the first time that transshipments are examined in a dynamic or deterministic setting. We consider a system of two locations which replenish their stock from a single supplier, and where transshipments between the locations are possible. Our model includes fixed (possibly joint) and variable replenishment costs, fixed and variable transshipment costs, as well as holding costs for each location and transshipment costs between locations. The problem is to determine how much to replenish and how much to transship each period; thus this work can be viewed as a synthesis of transshipment problems in a static stochastic setting and multilocation dynamic deterministic lot sizing problems. We provide interesting structural properties of optimal policies which enhance our understanding of the important issues which motivate transshipments and allow us to develop an efficient polynomial time algorithm for obtaining the optimal strategy. By exploring the reasons for using transshipments, we enable practitioners to envision the sources of savings from using this strategy and therefore motivate them to incorporate it into their replenishment strategies. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48:386–408, 2001     

Yield randomness,cost tradeoffs,and diversification in the EOQ model

Existing production/inventory models with random (variable) yield take the yield distribution as given. This work takes a step towards selecting the optimal yield randomness, jointly with lot sizing decisions. First, we analyze an EOQ model where yield variance and lot size are to be selected simultaneously. Two different cost structures are considered. Secondly, we consider source diversification (‘second sourcing’) as a means of reducing effective yield randomness, and trade its benefits against its costs. Conditions for the superiority of diversification between two sources with distinct yield distributions over a single source are derived. The optimal number of identical sources is also analyzed. Some comments on the congruence of the results with recent JIT practices are provided.     

Disruption‐management strategies for short life‐cycle products

Supplier diversification, contingent sourcing, and demand switching (whereby a firm shifts customers to a different product if their preferred product is unavailable), are key building blocks of a disruption‐management strategy for firms that sell multiple products over a single season. In this article, we evaluate 12 possible disruption‐management strategies (combinations of the basic building‐block tactics) in the context of a two‐product newsvendor. We investigate the influence of nine attributes of the firm, its supplier(s), and its products on the firs preference for the various strategies. These attributes include supplier reliability, supplier failure correlation, payment responsibility in the event of a supply failure, product contribution margin, product substitutability, demand uncertainties and correlation, and the decision makes risk aversion. Our results show that contingent sourcing is preferred to supplier diversification as the supply risk (failure probability) increases, but diversification is preferred to contingent sourcing as the demand risk (demand uncertainty) increases. We find that demand switching is not effective at managing supply risk if the products are sourced from the same set of suppliers. Demand switching is effective at managing demand risk and so can be preferred to the other tactics if supply risk is low. Risk aversion makes contingent sourcing preferable over a wider set of supply and demand‐risk combinations. We also find a two‐tactic strategy provides almost the same benefit as a three‐tactic strategy for most reasonable supply and demand‐risk combinations. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

To wait or not to wait: Optimal ordering under lead time uncertainty and forecast updating

There has been a dramatic increase over the past decade in the number of firms that source finished product from overseas. Although this has reduced procurement costs, it has increased supply risk; procurement lead times are longer and are often unreliable. In deciding when and how much to order, firms must consider the lead time risk and the demand risk, i.e., the accuracy of their demand forecast. To improve the accuracy of its demand forecast, a firm may update its forecast as the selling season approaches. In this article we consider both forecast updating and lead time uncertainty. We characterize the firm's optimal procurement policy, and we prove that, with multiplicative forecast revisions, the firm's optimal procurement time is independent of the demand forecast evolution but that the optimal procurement quantity is not. This leads to a number of important managerial insights into the firm's planning process. We show that the firm becomes less sensitive to lead time variability as the forecast updating process becomes more efficient. Interestingly, a forecast‐updating firm might procure earlier than a firm with no forecast updating. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

Transshipment through crossdocks with inventory and time windows

A major challenge in making supply meet demand is to coordinate transshipments across the supply chain to reduce costs and increase service levels in the face of demand fluctuations, short lead times, warehouse limitations, and transportation and inventory costs. In particular, transshipment through crossdocks, where just‐in‐time objectives prevail, requires precise scheduling between suppliers, crossdocks, and customers. In this work, we study the transshipment problem with supplier and customer time windows where flow is constrained by transportation schedules and warehouse capacities. Transportation is provided by fixed or flexible schedules and lot‐sizing is dealt with through multiple shipments. We develop polynomial‐time algorithms or, otherwise, provide the complexity of the problems studied. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

Benders decomposition with alternative multiple cuts for a multi‐product closed‐loop supply chain network design model

In this article, we consider a multi‐product closed‐loop supply chain network design problem where we locate collection centers and remanufacturing facilities while coordinating the forward and reverse flows in the network so as to minimize the processing, transportation, and fixed location costs. The problem of interest is motivated by the practice of an original equipment manufacturer in the automotive industry that provides service parts for vehicle maintenance and repair. We provide an effective problem formulation that is amenable to efficient Benders reformulation and an exact solution approach. More specifically, we develop an efficient dual solution approach to generate strong Benders cuts, and, in addition to the classical single Benders cut approach, we propose three different approaches for adding multiple Benders cuts. These cuts are obtained via dual problem disaggregation based either on the forward and reverse flows, or the products, or both. We present computational results which illustrate the superior performance of the proposed solution methodology with multiple Benders cuts in comparison to the branch‐and‐cut approach as well as the traditional Benders decomposition approach with a single cut. In particular, we observe that the use of multiple Benders cuts generates stronger lower bounds and promotes faster convergence to optimality. We also observe that if the model parameters are such that the different costs are not balanced, but, rather, are biased towards one of the major cost categories (processing, transportation or fixed location costs), the time required to obtain the optimal solution decreases considerably when using the proposed solution methodology as well as the branch‐and‐cut approach. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Integrating decisions with advance supply information in an assemble-to-order system

We study a periodic-review assemble-to-order (ATO) system with multiple components and multiple products, in which the inventory replenishment for each component follows an independent base-stock policy and stochastic product demands are satisfied according to a First-Come-First-Served rule. We assume that the replenishment for various component suffers from lead time uncertainty. However, the decision maker has the so-called advance supply information (ASI) associated with the lead times and thus can take advantage of the information for system optimization. We propose a multistage stochastic integer program that incorporates ASI to address the joint optimization of inventory replenishment and component allocation. The optimal base-stock policy for the inventory replenishment is determined using the sample average approximation algorithm. Also, we provide a modified order-based component allocation (MOBCA) heuristic for the component allocation. We additionally consider a special case of the variable lead times where the resulting two-stage stochastic programming model can be characterized as a single-scenario case of the proposed multistage model. We carry out extensive computational studies to quantify the benefits of integrating ASI into joint optimization and to explore the possibility of employing the two-stage model as a relatively efficient approximation scheme for the multistage model.     

Contractual agreements for coordination and vendor‐managed delivery under explicit transportation considerations

We consider the coordination problem between a vendor and a buyer operating under generalized replenishment costs that include fixed costs as well as stepwise freight costs. We study the stochastic demand, single‐period setting where the buyer must decide on the order quantity to satisfy random demand for a single item with a short product life cycle. The full order for the cycle is placed before the cycle begins and no additional orders are accepted by the vendor. Due to the nonrecurring nature of the problem, the vendor's replenishment quantity is determined by the buyer's order quantity. Consequently, by using an appropriate pricing schedule to influence the buyer's ordering behavior, there is an opportunity for the vendor to achieve substantial savings from transportation expenses, which are represented in the generalized replenishment cost function. For the problem of interest, we prove that the vendor's expected profit is not increasing in buyer's order quantity. Therefore, unlike the earlier work in the area, it is not necessarily profitable for the vendor to encourage larger order quantities. Using this nontraditional result, we demonstrate that the concept of economies of scale may or may not work by identifying the cases where the vendor can increase his/her profits either by increasing or decreasing the buyer's order quantity. We prove useful properties of the expected profit functions in the centralized and decentralized models of the problem, and we utilize these properties to develop alternative incentive schemes for win–win solutions. Our analysis allows us to quantify the value of coordination and, hence, to identify additional opportunities for the vendor to improve his/her profits by potentially turning a nonprofitable transaction into a profitable one through the use of an appropriate tariff schedule or a vendor‐managed delivery contract. We demonstrate that financial gain associated with these opportunities is truly tangible under a vendor‐managed delivery arrangement that potentially improves the centralized solution. Although we take the viewpoint of supply chain coordination and our goal is to provide insights about the effect of transportation considerations on the channel coordination objective and contractual agreements, the paper also contributes to the literature by analyzing and developing efficient approaches for solving the centralized problem with stepwise freight costs in the single‐period setting. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Operations sequencing for a multi‐stage production inventory system

This article studies operations sequencing for a multi‐stage production inventory system with lead times under predictable (deterministic) yield losses and random demand. We consider various cases with either full or partial release of work‐in‐process inventories, for either pre‐operation or post‐operation cost structures, and under either the total discounted or average cost criteria. We derive necessary and sufficient criteria for the optimal sequence of operations in all cases. While the criteria differ in their specific forms, they all lead to the same principal: those operations with (1) lower yields, (2) lower processing costs, (3) longer lead times, and (4) lower inventory holding costs should be placed higher upstream in the system.Copyright © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 144–154, 2014     

Analysis of an Alternative Military Healthcare Benefit Design

Abstract

The Military Compensation and Retirement Modernization Commission was established by the Congress in 2013 to perform a systematic review of military compensation to address rising costs and other trends. Their recommendation for reforming the TRICARE health care program was sweeping, and differed greatly from earlier proposals that focused on increasing beneficiary cost shares. Specifically, the commission proposed overhauling the current benefit delivery model and replacing it with a premium-based insurance model offering a menu of DoD-sponsored private health plans. The analysis presented here is based on work that supported the commission by estimating the budgetary impact of its proposed reforms. Results indicate that movement towards the premium-based model would produce an annual budgetary cost savings in the $2 billion to $4 billion range, with a best savings estimate of $3.2 billion.     

The impact of inventory information distortion due to customer order cancellations

In this paper we study the impact of cancellations of customer orders on an inventory system. We develop a periodic review (s, S) inventory model with Poisson demands, deterministic demand leadtimes and supply leadtimes. When no set up cost is present for replenishment, the behavior of the system cost can be studied analytically. For the case with a fixed set up cost, we derive the operating characteristics of the model via an embedded Markov chain analysis. Based on this, we formulate the total cost function and suggest a two‐phase approach to optimization. Our model can be used to compute cancellation fees and to evaluate the impacts of various conditions of cancellation. We find that cancellations, as major sources of inventory information distortion, increase total system costs, and the magnitude of the cost impact depends on the probability of cancellation and the expected cancellation time. Other relevant lessons and insights are also discussed. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 213–231, 1999     

Optimal control policies for a periodic review inventory system with emergency orders

We describe a periodic review inventory system where emergency orders, which have a shorter supply lead time but are subject to higher ordering cost compared to regular orders, can be placed on a continuous basis. We consider the periodic review system in which the order cycles are relatively long so that they are possibly larger than the supply lead times. Study of such systems is important since they are often found in practice. We assume that the difference between the regular and emergency supply lead times is less than the order-cycle length. We develop a dynamic programming model and derive a stopping rule to end the computation and obtain optimal operation parameters. Computational results are included that support the contention that easily implemented policies can be computed with reasonable effort. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 187–204, 1998     

An asymptotically optimal greedy heuristic for the multiperiod single‐sourcing problem: The cyclic case

The dynamics of the environment in which supply chains evolve requires that companies frequently redesign their logistics distribution networks. In this paper we address a multiperiod single‐sourcing problem that can be used as a strategic tool for evaluating the costs of logistics network designs in a dynamic environment. The distribution networks that we consider consist of a set of production and storage facilities, and a set of customers who do not hold inventories. The facilities face production capacities, and each customer's demand needs to be delivered by a single facility in each period. We deal with the assignment of customers to facilities, as well as the location, timing, and size of inventories. In addition, to mitigate start and end‐of‐study effects, we view the planning period as a typical future one, which will repeat itself. This leads to a cyclic model, in which starting and ending inventories are equal. Based on an assignment formulation of the problem, we propose a greedy heuristic, and prove that this greedy heuristic is asymptotically feasible and optimal in a probabilistic sense. We illustrate the behavior of the greedy heuristic, as well as some improvements where the greedy heuristic is used as the starting point of a local interchange procedure, on a set of randomly generated test problems. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 412–437, 2003     

Performance evaluation of a production/inventory system with periodic review and endogenous lead times

This paper considers a discrete time, single item production/inventory system with random period demands. Inventory levels are reviewed periodically and managed using a base‐stock policy. Replenishment orders are placed with the production system which is capacitated in the sense that there is a single server that sequentially processes the items one at a time with stochastic unit processing times. In this setting the variability in demand determines the arrival pattern of production orders at the queue, influencing supply lead times. In addition, the inventory behavior is impacted by the correlation between demand and lead times: a large demand size corresponds to a long lead time, depleting the inventory longer. The contribution of this paper is threefold. First, we present an exact procedure based on matrix‐analytic techniques for computing the replenishment lead time distribution given an arbitrary discrete demand distribution. Second, we numerically characterize the distribution of inventory levels, and various other performance measures such as fill rate, base‐stock levels and optimal safety stocks, taking the correlation between demand and lead times into account. Third, we develop an algorithm to fit the first two moments of the demand and service time distribution to a discrete phase‐type distribution with a minimal number of phases. This provides a practical tool to analyze the effect of demand variability, as measured by its coefficient of variation, on system performance. We also show that our model is more appropriate than some existing models of capacitated systems in discrete time. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Scheduling and due‐date quotation in a make‐to‐order supply chain

We consider a manufacturer, served by a single supplier, who has to quote due dates to arriving customers in a make‐to‐order production environment. The manufacturer is penalized for long lead times and for missing due dates. To meet due dates, the manufacturer has to obtain components from a supplier. We model this manufacturer and supplier as a two‐machine flow shop, consider several variations of this problem, and design effective due‐date quotation and scheduling algorithms for centralized and decentralized versions of the model. We perform extensive computational testing to assess the effectiveness of our algorithms and to compare the centralized and decentralized models to quantify the value of centralized control in a make‐to‐order supply chain. Since complete information exchange and centralized control is not always practical or cost‐effective, we explore the value of partial information exchange for this system. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008