An economic two-stage screening procedure with a prescribed outgoing quality in logistic and normal models

An economic two-stage screening procedure based on a dichotomous performance variable T and a continuous screening variable X is proposed. X is measured first to decide whether an item should be accepted, rejected, or additional observations should be taken. If no terminal decision is reached, T is then observed to classify the undecided items. Two models are considered; (i) the logistic model, where P(T = 1|X = x) is assumed to be a logistic function of x, and (ii) the normal model, where X given T is assumed to be normally distributed. A simple economic model based on inspection and misclassification costs is constructed. Optimal cutoff values on the screening variable are obtained by minimizing the expected cost subject to the constraint that the average outgoing quality attains a pre-specified level. Solutions are provided for both known-parameter and unknown-parameter cases. © 1995 John Wiley & Sons, Inc.     

A note on a prediction interval for a first-order Gauss Markov process

Let X_t, t = 1,2, ?, be a stationary Gaussian Markov process with E(X_t) = μ and Cov(X_t, X_t+k) = σ²ρ^k. We derive a prediction interval for X_2n+1 based on the preceding 2n observations X₁,X₂, ?,X_2n.     

Sojourn time analysis of a queueing system with two‐phase service and server vacations

We consider a two‐phase service queueing system with batch Poisson arrivals and server vacations denoted by M^X/G₁‐G₂/1. The first phase service is an exhaustive or a gated bulk service, and the second phase is given individually to the members of a batch. By a reduction to an M^X/G/1 vacation system and applying the level‐crossing method to a workload process with two types of vacations, we obtain the Laplace–Stieltjes transform of the sojourn time distribution in the M^X/G₁‐G₂/1 with single or multiple vacations. The decomposition expression is derived for the Laplace–Stieltjes transform of the sojourn time distribution, and the first two moments of the sojourn time are provided. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Testing for positive quadrant dependence in ordinal contingency table

Two new randomization tests are introduced for ordinal contingency tables for testing independence against strictly positive quadrant dependence, i.e., P(X > x,Y > y) ≥ P(X > x)P(Y > y) for all x,y with strict inequality for some x and y. For a number of cases, simulation is used to compare the estimated power of these tests versus those standard tests based on Kendall's T, Spearman's p, Pearson's X², the usual likelihood ratio test, and a test based upon the log-odds ratio. In these cases, subsets of the alternative region are identified where each of the testing statistics is superior. The new tests are found to be more powerful than the standard tests over a broad range of the alternative regions for these cases.     

A note on minimizing the expected makespan in flowshops subject to breakdowns

Consider a two machine flow shop and n jobs. The processing time of job j on machine i is equal to the random variable X_ij One of the two machines is subject to breakdown and repair. The objective is to find the schedule that minimizes the expected makespan. Two results are shown. First, ifP(X_2j ≧ X_1j) = 1 for all j and the random variables X₁₁, X₁₂,…, X_1n are likelihood ratio ordered, then the SEPT sequence minimizes the expected makespan when machine 2 is subject to an arbitrary breakdown process; if P(X_1j≧X_2j) = 1 and X₂₁, X₂₂,….,X_2n are likelihood ratio ordered, then the LEPT sequence minimizes the expected makespan when machine 1 is subject to an arbitrary breakdown process. A generalization is presented for flow shops with m machines. Second, consider the case where X_1j and X_2j are i.i.d. exponentially distributed with rate λ_j. The SEPT sequence minimizes the expected makespan when machine 2 is subject to an arbitrary breakdown process and the LEPT sequence is optimal when machine 1 is subject to an arbitrary breakdown process. © 1995 John Wiley & Sons, Inc.     

Covariance of weibull order statistics

Let X₁ < X₂ <… < X_n denote an ordered sample of size n from a Weibull population with cdf F(x) = 1 - exp (?x^p), x > 0. Formulae for computing Cov (X_i, X_j) are well known, but they are difficult to use in practice. A simple approximation to Cov(X_i, X_j) is presented here, and its accuracy is discussed.     

The NBUL class of life distribution and replacement policy comparisons

Let X and X_τ denote the lifetime and the residual life at age τ of a system, respectively. X is said to be a NBUL random variable if X_τ is smaller than X in Laplace order, i.e., X_τ ≤_L X. We obtain some characterizations for this class of life distribution by means of the lifetime of a series system and the residual life at random time. We also discuss preservation properties for this class of life distribution under shock models. Finally, under the assumption that the lifetimes have the NBUL property, we make stochastic comparisons between some basic replacement policies. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 578–591, 2001.     

Cumulative search-evasion games

Cumulative search-evasion games (CSEGs) are two-person zero-sum search-evasion games where play proceeds throughout some specified period without interim feedback to either of the two players. Each player moves according to a preselected plan. If (X_t, Y_t,) are the positions of the two players at time t, then the game's payoff is the sum over t from 1 to T of A(X_t, Y_t, t). Additionally, all paths must be “connected.” That is, the finite set of positions available for a player in any time period depends on the position selected by that player in the previous time period. One player attempts to select a mixed strategy over the feasible T-time period paths to maximize the expected payoff. The other minimizes. Two solution procedures are given. One uses the Brown-Robinson method of fictitious play and the other linear programming. An example problem is solved using both procedures.     

A guarantee rate optimization model for wastewater treatment system design under uncertainty

We consider a design problem for wastewater treatment systems that considers uncertainty in pollutant concentration levels at water sources. The goal is to optimize the selection of treatment technologies and pipeline connections, so that treated wastewater can achieve specified effluents discharge limits as well as possible. We propose a new two-stage model to optimize a set of guarantee levels, that is, the maximum concentration level of source pollutants for which treated wastewater can be compliant with discharge limits. In the first stage, treatment technologies and pipeline connections are selected. In the second stage, when pollutant concentration levels are revealed, wastewater distribution and mixing are determined. A key attractiveness of the proposed guarantee rate optimization model is that it can be simplified into a single-stage mixed-integer linear program. In our numerical experiments based on real-world pollutants data, the guarantee rate model demonstrates its advantages in terms of computational efficiency, scalability and solution quality, compared with the standard probability maximization model. Finally, the methodology proposed in this paper can also be applied to other two-stage problems under uncertainty with similar uncertainty characteristics.     

On computing the expected discounted return in a markov chain

The discounted return associated with a finite state Markov chain X₁, X₂… is given by g(X₁)+ αg(X₂) + α²g(X₃) + …, where g(x) represents the immediate return from state x. Knowing the transition matrix of the chain, it is desired to compute the expected discounted return (present worth) given the initial state. This type of problem arises in inventory theory, dynamic programming, and elsewhere. Usually the solution is approximated by solving the system of linear equations characterizing the expected return. These equations can be solved by a variety of well-known methods. This paper describes yet another method, which is a slight modification of the classical iterative scheme. The method gives sequences of upper and lower bounds which converge mono-tonely to the solution. Hence, the method is relatively free of error control problems. Computational experiments were conducted which suggest that for problems with a large number of states, the method is quite efficient. The amount of computation required to obtain the solution increases much slower with an increase in the number of states, N, than with the conventional methods. In fact, computational time is more nearly proportional to N², than to N³.     

Economic screening procedures in logistic and normal models

Economic screening procedures based on a continuous screening variable X in place of a dichotomous performance variable T are presented. Optimal critical values on the screening variable minimizing the expected cost are obtained for two models; it is assumed that X given T is normally distributed in normal model and P[T = 1|X] is a logistic function of X in the logistic model, and that costs are incurred by screening inspection and misclassification errors. Cases where some parameters are unknown are also considered.     

Combination setwise-Bonferroni-type bounds

We consider three classes of lower bounds to P(c) = P (X₁ ≤ c₁,…, X_n ≤ c); Bonferroni-type bounds, product-type bounds and setwise bounds. Setwise probability inequalities are shown to be a compromise between product-type and Bonferroni-type probability inequalities. Bonferroni-type inequalities always hold. Product-type inequalities require positive dependence conditions, but are superior to the Bonferroni-type and setwise bounds when these conditions are satisfied. Setwise inequalities require less stringent positive dependence bound conditions than the product-type bounds. Neither setwise nor Bonferroni-type bounds dominate the other. Optimized setwise bounds are developed. Results pertaining to the nesting of setwise bounds are obtained. Combination setwise-Bonferroni-type bounds are developed in which high dimensional setwise bounds are applied and second and third order Bonferroni-type bounds are applied within each subvector of the setwise bounds. These new combination bounds, which are applicable for associated random variables, are shown to be superior to Bonferroni-type and setwise bounds for moving averages and runs probabilities. Recently proposed upper bounds to P(c) are reviewed. The lower and upper bounds are tabulated for various classes of multivariate normal distributions with banded covariance matrices. The bounds are shown to be surprisingly accurate and are much easier to compute than the inclusion-exclusion bounds. A strategy for employing the bounds is developed. © 1996 John Wiley & Sons, Inc.     

On the first time a separately maintained parallel system has been down for a fixed time

Consider a system consisting of n separately maintained independent components where the components alternate between intervals in which they are “up” and in which they are “down”. When the i^th component goes up [down] then, independent of the past, it remains up [down] for a random length of time, having distribution F_i[G_i], and then goes down [up]. We say that component i is failed at time t if it has been “down” at all time points s ?[t-A.t]: otherwise it is said to be working. Thus, a component is failed if it is down and has been down for the previous A time units. Assuming that all components initially start “up,” let T denote the first time they are all failed, at which point we say the system is failed. We obtain the moment-generating function of T when n = l, for general F and G, thus generalizing previous results which assumed that at least one of these distributions be exponential. In addition, we present a condition under which T is an NBU (new better than used) random variable. Finally we assume that all the up and down distributions F_i and G_i i = l,….n, are exponential, and we obtain an exact expression for E(T) for general n; in addition we obtain bounds for all higher moments of T by showing that T is NBU.     

The asymptotic distribution of order statistics

For each n., X₁(n), X₂(n), …, X_n(n) are IID, with common pdf f_n(x). y₁(n) < … < Y_n (n) are the ordered values of X₁ (n), …, X_n(n). K_n is a positive integer, with lim K_n = ∞. Under certain conditions on K_n and f_n (x), it was shown in an earlier paper that the joint distribution of a special set of K_n + 1 of the variables Y₁ (n), …, Y_n (n) can be assumed to be normal for all asymptotic probability calculations. In another paper, it was shown that if f_n (x) approaches the pdf which is uniform over (0, 1) at a certain rate as n increases, then the conditional distribution of the order statistics not in the special set can be assumed to be uniform for all asymptotic probability calculations. The present paper shows that even if f_n (x) does not approach the uniform distribution as n increases, the distribution of the order statistics contained between order statistics in the special set can be assumed to be the distribution of a quadratic function of uniform random variables, for all asymptotic probability calculations. Applications to statistical inference are given.     

Some properties and computational results for a general repair process

We consider a general repair process where the virtual age V_i after the ith repair is given by V_i = ϕ(V_i−1 + X_i), ϕ(·) is a specified repair functional, and X_i is the time between the (i − 1)th and ith repair. Some monotonicity and dominance properties are derived, and an equilibrium process is considered. A computational method for evaluating the expected number/density of repairs is described together with an approximation method for obtaining some parameters of the equilibrium process. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 391–405, 1998     

Confidence intervals for ranked means

Suppose that observations from populations π₁, …, π_k (k ≥ 1) are normally distributed with unknown means μ₁., μ_k, respectively, and a common known variance σ². Let μ_[1] μ … ≤ μ_[k] denote the ranked means. We take n independent observations from each population, denote the sample mean of the n observation from π₁ by X _i (i = 1, …, k), and define the ranked sample means X _[1] ≤ … ≤ X _[k]. The problem of confidence interval estimation of μ₍₁₎, …,μ_[k] is stated and related to previous work (Section 1). The following results are obtained (Section 2). For i = 1, …, k and any γ(0 < γ < 1) an upper confidence interval for μ_[i] with minimal probability of coverage γ is (? ∞, X _[i]+ h) with h = (σ/n^1/2) Φ^?1(γ^1/k-i+1), where Φ(·) is the standard normal cdf. A lower confidence interval for μ_[i] with minimal probability of coverage γ is (X _i[i] – g, + ∞) with g = (σ/n^1/2) Φ^?1(γ^1/i). For the upper confidence interval on μ_[i] the maximal probability of coverage is 1– [1 – γ^1/k-i+1]ⁱ, while for the lower confidence interval on μ_[i] the maximal probability of coverage is 1–[1– γ^1/i] ^k-i+¹. Thus the maximal overprotection can always be calculated. The overprotection is tabled for k = 2, 3. These results extend to certain translation parameter families. It is proven that, under a bounded completeness condition, a monotone upper confidence interval h(X ₁, …, X _k) for μ_[i] with probability of coverage γ(0 < γ < 1) for all μ = (μ_[1], …,μ_[k]), does not exist.     

Distribution of sample correlation coefficients

Let (Y, X_l,…, X_K) be a random vector distributed according to a multivariate normal distribution where X_l,…, X_K are considered as predictor variables and y is the predictand. Let r_i, and R_i denote the population and sample correlation coefficients, respectively, between Y and X_i. The population correlation coefficient r_i is a measure of the predictive power of X_i. The author has derived the joint distribution of R_l,…, R_K and its asymptotic property. The given result is useful in the problem of selecting the most important predictor variable corresponding to the largest absolute value of r_i.     

Estimating value in a uniform auction

Consider an auction in which increasing bids are made in sequence on an object whose value θ is known to each bidder. Suppose n bids are received, and the distribution of each bid is conditionally uniform. More specifically, suppose the first bid X₁ is uniformly distributed on [0, θ], and the i^th bid is uniformly distributed on [X_i?1, θ] for i = 2, …?, n. A scenario in which this auction model is appropriate is described. We assume that the value θ is un known to the statistician and must be esimated from the sample X₁, X₂, …?, X_n. The best linear unbiased estimate of θ is derived. The invariance of the estimation problem under scale transformations in noted, and the best invariant estimation problem under scale transformations is noted, and the best invariant estimate of θ under loss L(θ, a) = [(a/θ) ? 1]² is derived. It is shown that this best invariant estimate has uniformly smaller mean-squared error than the best linear unbiased estimate, and the ratio of the mean-squared errors is estimated from simulation experiments. A Bayesian formulation of the estimation problem is also considered, and a class of Bayes estimates is explicitly derived.     

On estimating the reliability of a component subject to several different stresses (strengths)

This paper is concerned with estimating p = P(X₁ < Y …, X_n < Y) or q =P (X < Y₁, …, X < Y_n) where the X's and Y's are all independent random variables. Applications to estimation of the reliability p from stress-strength relationships are considered where a component is subject to several stresses X₁, X₂, …, X_N whereas its strength, Y, is a single random variable. Similarly, the reliability q is of interest where a component is made of several parts all with their individual strengths Y₁, Y₂ …, Y_N and a single stress X is applied to the component. When the X's and Y's are independent and normal, maximum likelihood estimates of p and q have been obtained. For the case N = 2 and in some special cases, minimum variance unbiased estimates have been given. When the Y's are all exponential and the X is normal with known variance, but unknown mean (or uniform between 0 and θ, θ being unknown) the minimum variance unbiased estimate of q is established in this paper.     

Peak rate of occurrence of a poisson process

Suppose that a nonhomogeneous Poisson process is observed for a length of time T, say Let λ (t) denote the mean value function of the process. It is assumed that λ (t) is first increasing then decreasing inside the interval (0, T) with peak at t = t₀, say. Three methods are given for estimating to. One of these methods is nonparametric, and the other two methods are based on the standard regression technique and the maximum likelihood principle The given resull has application in a problem of determining the azimuth of a target from the radar-impulse data. The time series of incoming signals may be approximated by the occurrence of a nonhomogeneous Poisson process with mean value function λ (t). The azimuth of the target is reasonably determined from the direction of the axis of the radar beam at the instant to, corresponding to the peak value of λ (t).