An (s,S) inventory system with rest periods to the server

We study the (s,S) inventory system in which the server takes a rest when the level of the inventory is zero. The demands are assumed to occur for one unit at a time. The interoccurrence times between successive demands, the lead times, and the rest times are assumed to follow general distributions which are mutually independent. Using renewal and convolution techniques we obtain the state transition probabilities.     

An (s,S) model for inventory with exponential lifetimes and renewal demands

Inventory control of products with finite lifetimes is important in many modern business organizations. It has been an important and difficult research subject. Here, we study the (s, S) continuous review model for items with an exponential random lifetime and a general renewal demand process through a Markov process. We derive a fundamental rate conservation theorem and show that all the other system performance measures can be obtained easily through the expected reorder cycle length. This leads to a simple expression for the total expected long run cost rate function in terms of the expected reorder cycle length. Subsequently, we derive formulas for computing the expected cycle lengths for the general renewal demand as well as for a large class of demands characterized by the phase type interdemand time distribution. We show analytically when the cost as a function of the reorder level is monotone, concave, or convex. We also show analytically that, depending on the behavior of the expected reorder cycle, the cost as a function of the order‐up level is either monotone increasing or unimodal. These analytical properties enable us to understand the problem and make the subsequent numerical optimization much easier. Numerical studies confirm and illustrate some of the analytical properties. The results also demonstrate the impact of various parameters on the optimal policy and the cost. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 39–56, 1999     

Approximation methods for the analysis of a multicomponent,multiproduct assemble‐to‐order system

In this article, we consider the performance evaluation of a multicomponent, multiproduct assemble‐to‐order (ATO) system. Each component is managed independently using a base‐stock policy at a supply facility with limited production capacity and an infinite buffer. The arrivals of demands follow a multivariate Poisson process and unfilled demands are backlogged. Because exact analysis of the proposed system is not feasible, we propose two approximation methods which provide upper and lower bounds for various performance measures such as fill rate, average waiting time, and average number of backorders of the proposed system. Our computational experiments demonstrate the effectiveness of the two approximation methods under various system settings. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Risk pooling in a two-period,two-echelon inventory stocking and allocation problem

The object of this article is to investigate the risk-pooling effect of depot stock in two-echelon distribution system in which the depot serves n retailers in parallel, and to develop computationally tractable optimization procedures for such systems. The depot manager has complete information about stock levels and there are two opportunities to allocate stock to the retailers within each order cycle. We identify first- and second-order aspects to the risk-pooling effect. In particular, the second-order effect is the property that the minimum stock available to any retailer after the second allocation converges in probability to a constant as the number of retailers in the system increases, assuming independence of the demands. This property is exploited in the development of efficient procedures to determine near-optimal values of the policy parameters.     

Application of perturbation analysis to a class of periodic review (s,S) inventory systems

In this article we apply perturbation analysis (PA), combined with conditional Monte Carlo, to obtain derivative estimators of the expected cost per period with respect to s and S, for a class of periodic review (s, S) inventory systems with full backlogging, linear holding and shortage costs, and where the arrivals of demands follow a renewal process. We first develop the general form of four different estimators of the gradient for the finite-horizon case, and prove that they are unbiased. We next consider the problem of implementing our estimators, and develop efficient methodologies for the infinite-horizon case. For the case of exponentially distributed demand interarrival times, we implement our estimators using a single sample path. Generally distributed interarrival times are modeled as phase-type distributions, and the implementation of this more general case requires a number of additional off-line simulations. The resulting estimators are still efficient and practical, provided that the number of phases is not too large. We conclude by reporting the results of simulation experiments. The results provide further validity of our methodology and also indicate that our estimators have very low variance. © 1994 John Wiley & Sons, Inc.     

Inventory management under random supply disruptions and partial backorders

We explore the management of inventory for stochastic-demand systems, where the product's supply is randomly disrupted for periods of random duration, and demands that arrive when the inventory system is temporarily out of stock become a mix of backorders and lost sales. The stock is managed according to the following modified (s, S) policy: If the inventory level is at or below s and the supply is available, place an order to bring the inventory level up to S. Our analysis yields the optimal values of the policy parameters, and provides insight into the optimal inventory strategy when there are changes in the severity of supply disruptions or in the behavior of unfilled demands. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 687–703, 1998     

Optimal control of a capacitated inventory system with multiple demand classes

This article studies the optimal control of a periodic‐review make‐to‐stock system with limited production capacity and multiple demand classes. In this system, a single product is produced to fulfill several classes of demands. The manager has to make the production and inventory allocation decisions. His objective is to minimize the expected total discounted cost. The production decision is made at the beginning of each period and determines the amount of products to be produced. The inventory allocation decision is made after receiving the random demands and determines the amount of demands to be satisfied. A modified base stock policy is shown to be optimal for production, and a multi‐level rationing policy is shown to be optimal for inventory allocation. Then a heuristic algorithm is proposed to approximate the optimal policy. The numerical studies show that the heuristic algorithm is very effective. © 2011 Wiley Periodicals, Inc. Naval Research Logistics 58: 43–58, 2011     

Purchase and retrieval competition for seasonal produce

We study the competition problem of purchase and multiretrieval of perishable seasonal produce, where wholesalers purchase and stock their products in the first period, and then retrieve and sell them in subsequent periods. We first consider the duopoly case and assume that the prices are exogenous and fluctuate. In each period, after the price realization, the wholesalers retrieve some stock from their warehouses to satisfy their demands. One wholesaler's unsatisfied customers can switch to another and be satisfied by its left retrieved products. Any unsold retrieved stock has no salvage value and any unsatisfied demand is lost. The unretrieved stock is carried to the next period at a perishable rate. The wholesalers compete for the substitute demand by determining their own purchase and retrieval quantities. We show the existence and uniqueness of a pure-strategy Nash equilibrium, and that the Nash equilibrium strategy has the simple “sell-down-to” structure. We also consider the general N-person game and show the existence of the Nash equilibrium, and characterize the structure of the equilibrium strategy for the symmetric case. In addition, we consider the case with endogenous prices, and show that the problem reduces to a repeated newsvendor game with price and inventory competition. We derive the conditions under which a unique Nash equilibrium exists and characterize the equilibrium strategy. Finally, we conduct numerical studies to examine the impacts of the model parameters on the equilibrium outcomes and to generate managerial insights.     

Effect of increasing component commonality on service level and holding cost

We investigate the effect of increasing component commonality in an assemble-to-order system. Numerical investigation of two end products that share up to three components, and whose demands are identically distributed according to either the exponential or the geometric distribution, shows that increasing component commonality results in increasing marginal returns when the criteria are aggregate service level and aggregate stock requirement. For arbitrary end-product demands and general service measures, it is shown that the optimal holding cost for a given service level is concave in the level of commonality. © 1992 John Wiley & Sons, Inc.     

On the (S − 1, S) lost sales inventory model with priority demand classes

In this paper an inventory model with several demand classes, prioritised according to importance, is analysed. We consider a lot‐for‐lot or (S ? 1, S) inventory model with lost sales. For each demand class there is a critical stock level at and below which demand from that class is not satisfied from stock on hand. In this way stock is retained to meet demand from higher priority demand classes. A set of such critical levels determines the stocking policy. For Poisson demand and a generally distributed lead time, we derive expressions for the service levels for each demand class and the average total cost per unit time. Efficient solution methods for obtaining optimal policies, with and without service level constraints, are presented. Numerical experiments in which the solution methods are tested demonstrate that significant cost reductions can be achieved by distinguishing between demand classes. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 593–610, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10032     

Optimal policy for a dynamic multi-echelon inventory model

A general multiperiod multi-echelon supply system consisting of n facilities each stocking a single product is studied. At the beginning of a period each facility may order stock from an exogenous source with no delivery lag and proportional ordering costs. During the period the (random) demands at the facilities are satisfied according to a given supply policy that determines to what extent stock may be redistributed from facilities with excess stock to those experiencing shortages. There are storage, shortage, and transportation costs. An ordering policy that minimizes expected costs is sought. If the initial stock is sufficiently small and certain other conditions are fulfilled, it is optimal to order up to a certain base stock level at each facility. The special supply policy in which each facility except facility 1 passes its shortages on to a given lower numbered facility called its direct supplier is examined in some detail. Bounds on the base stock levels are obtained. It is also shown that if the demand distribution at facility j is stochastically smaller (“spread” less) than that at another facility k having the same direct supplier and if certain other conditions are fulfilled, then the optimal base stock level (“virtual” stock out probability) at j is less than (greater than) or equal to that at facility k.     

Priority and dynamic scheduling in a make‐to‐stock queue with hyperexponential demand

We consider the scheduling problem in a make‐to‐stock queue with two demand classes that can be differentiated based on their variability. One class experiences Poisson arrivals and the other class experiences hyperexponential renewal arrivals. We provide an exact analysis of the case where the demand class with higher variability is given non‐preemptive priority. The results are then used to compare the inventory cost performance of three scheduling disciplines, first‐come first‐serve and priority to either class. We then build on an existing dynamic scheduling heuristic to propose a modification that works well for our system. Extensions of the heuristic to more than two classes and to the case where demand state is known are also discussed. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006.     

A two-echelon inventory model with purchases,dispositions, shipments,returns and transshipments

This paper presents a one-period two-echelon inventory model with one warehouse in the first echelon and n warehouses in the second echelon. At the beginning of the period the stock levels at all facilities are adjusted by purchasing or disposing of items at the first echelon, returning or shipping items between the echelons and transshipping items within the second echelon. During the period, demands (which may be negative) are placed on all warehouses in the second echelon and an attempt is made to satisfy shortages either by an expedited shipment from the first echelon to the second echelon or an expedited transshipment within the second echelon. The decision problem is to choose an initial stock level at the first echelon (by a purchase or a disposition) and an initial allocation so as to minimize the initial stock movement costs during the period plus inventory carrying costs and system shortage costs at the end of the period. It is shown that the objective function takes on one of four forms, depending on the relative magnitudes of the various shipping costs. All four forms of the objective function are derived and proven to be convex. Several applications of this general model are considered. We also consider multi-period extensions of the general model and an important special case is solved explicitly.     

Optimal disposal policies for a single-item inventory system with returns

We consider a single-item inventory system in which the stock level can increase due to items being returned as well as decrease when demands occur. Returned items can be repaired and then used to satisfy future demand, or they can be disposed of. We identify those inventory levels where disposal is the best policy. It is shown that this problem is equivalent to a problem of controlling a single-server queue. When the return and demand processes are both Poisson, we find the optimal policy exactly. When the demand and return processes are more general, we use diffusion approximations to obtain an approximate model, which is then solved. The approximate model requires only mean and variance data. Besides the optimal policy, the output of the models includes such characteristics as the operating costs, the purchase rate for new items, the disposal rate for returned items and the average inventory level. Several numerical examples are given. An interesting by-product of our investigation is an approximation for the steady-state behavior of the bulk GI/G/1 queue with a queue limit.     

Warranty analysis and renewal function estimation

Estimation of the expected cost of a warranty for a stochastically failing unit is closely tied to estimation of the renewal function. The renewal function is a basic tool also used in probabilistic models arising in other areas such as reliability theory, inventory theory, and continuous sampling plans. In these other areas, estimation of a straight line approximation of the renewal function instead of direct estimation of the renewal function has proved successful. This approximation is based on a limit expression for large values of the argument, say t, of the renewal function. However, in warranty analusis, typically t is small compared to the mean failure time of the unit. Hence, alternative methods for renewal function estimation, both parametric and nonparametric, are presented and discussed. An important aspect of this paper is to discuss the performance of the renewal function estimators when only a small number of failed units is available. A Monte Carlo study is given which suggests guidelines for choosing an estimator under various circumstances.     

Maintenance of a device with age-dependent exponential failures

We consider a device that deteriorates over time according to a Markov process so that the failure rate at each state is constant. The reliability of the device is characterized by a Markov renewal equation, and an IFRA (increasing failure rate on average) property of the lifetime is obtained. The optimal replacement and repair problems are analyzed under various cost structures. Furthermore, intuitive and counterintuitive characterizations of the optimal policies and results on some interesting special problems are presented. © 1992 John Wiley & Sons, Inc.     

Performance evaluation of a production/inventory system with periodic review and endogenous lead times

This paper considers a discrete time, single item production/inventory system with random period demands. Inventory levels are reviewed periodically and managed using a base‐stock policy. Replenishment orders are placed with the production system which is capacitated in the sense that there is a single server that sequentially processes the items one at a time with stochastic unit processing times. In this setting the variability in demand determines the arrival pattern of production orders at the queue, influencing supply lead times. In addition, the inventory behavior is impacted by the correlation between demand and lead times: a large demand size corresponds to a long lead time, depleting the inventory longer. The contribution of this paper is threefold. First, we present an exact procedure based on matrix‐analytic techniques for computing the replenishment lead time distribution given an arbitrary discrete demand distribution. Second, we numerically characterize the distribution of inventory levels, and various other performance measures such as fill rate, base‐stock levels and optimal safety stocks, taking the correlation between demand and lead times into account. Third, we develop an algorithm to fit the first two moments of the demand and service time distribution to a discrete phase‐type distribution with a minimal number of phases. This provides a practical tool to analyze the effect of demand variability, as measured by its coefficient of variation, on system performance. We also show that our model is more appropriate than some existing models of capacitated systems in discrete time. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

A model for use in the rationing of inventory during lead time

While the traditional solution to the problem of meeting stochastically variable demands for inventory during procurement lead time is through the use of some level of safety stock, several authors have suggested that a decision be made to employ some form of rationing so as to protect certain classes of demands against stockout by restricting issues to other classes. Nahmias and Demmy [10] derived an approximate continuous review model of systems with two demand classes which would permit an inventory manager to calculate the expected fill rates per order cycle for high-priority, low-priority, and total system demands for a variety of parameters. The manager would then choose the rationing policy that most closely approximated his fill-rate objectives. This article describes a periodic review model that permits the manager to establish a discrete time rationing policy during lead time by prescribing a desired service level for high-priority demands. The reserve levels necessary to meet this level of service can then be calculated based upon the assumed probability distributions of high- and low-priority demands over lead time. The derived reserve levels vary with the amount of lead time remaining. Simulation tests of the model indicate they are more effective than the single reserve level policy studied by Nahmias and Demmy.     

A two-echelon multi-station inventory model for navy applications

The two inventory echelons under consideration are the depot, D, and k tender ships E₁, …, E_k. The tender ships supply the demand for certain parts of operational boats (the customers). The statistical model assumes that the total monthly demands at the k tenders are stationary independent Poisson random variables, with unknown means λ₁, …, λ_k. The stock levels on the tenders, at the heginning of each month, can be adjusted either by ordering more units from the depot, or by shipping bach to the depot an excess stock. There is no traffic of stock between tenders which is not via the depot. The lead time from the depot to the tenders is at most 1 month. The lead time for orders of the depot from the manufacturer is L months. The loss function due to erroneous decision js comprised of linear functions of the extra monthly stocks, and linear functions of shortages at the tenders and at the depot over the N months. A Bayes sequential decision process is set up for the optimal adjustment levels and orders of the two echelons. The Dynamic Programming recursive functions are given for a planning horizon of N months.     

Return policies for an inventory system with positive and negative demands

We consider a single item inventory system with positive and negative stock fluctuations. Items can be purchased from a central stock, n items can be returned for a cost R + rn, and a linear inventory carrying cost is charged. It is shown that for minimizing the asymptotic cost rate when returns are a significant fraction of stock usage, a two-critical-number policy (a,b) is optimal, where b is the trigger level for returns and b – a is the return quantity. The values for a and b are found, as well as the operating characteristics of the system. We also consider the optimal return decision to make at time zero and show that it is partially determined by a and b.