Resourcing for defense: Solving the roles and missions puzzle

One of the most important issues facing the post‐Cold War U.S. defense establishment concerns the future allocation of combat tasks and responsibilities among different branches of the armed forces. The challenge is to reduce unnecessary redundancy across roles and missions when resources are highly constrained, without compromising military effectiveness. Defining the policy problem as one of resource allocation rather than operational effectiveness, we develop a methodology for allocating roles and missions. Our methodology focuses at the highest level of force aggregation and uses a mathematical programming model to produce cross‐service cross‐mission trade‐offs that will yield the best total force combat and non‐combat potential within resource consumption constraints.     

Dynamic routing of prioritized warranty repairs

Recent years have seen a strong trend toward outsourcing warranty repair services to outside vendors. In this article we consider the problem of dynamically routing warranty repairs to service vendors when warranties have priority levels. Each time an item under warranty fails, it is sent to one of the vendors for repair. Items covered by higher priority warranty receive higher priority in repair service. The manufacturer pays a fixed fee per repair and incurs a linear holding cost while an item is undergoing or waiting for repair. The objective is to minimize the manufacturer's long‐run average cost. Because of the complexity of the problem, it is very unlikely that there exist tractable ways to find the optimal routing strategies. Therefore, we propose five heuristic routing procedures that are applicable to real‐life problems. We evaluate the heuristics using simulation. The simulation results show that the index‐based “generalized join the shortest queue” policy, which applies a single policy improvement step to an initial state‐independent policy, performs the best among all five heuristics. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Approximation results for min‐max path cover problems in vehicle routing

This article studies a min‐max path cover problem, which is to determine a set of paths for k capacitated vehicles to service all the customers in a given weighted graph so that the largest path cost is minimized. The problem has wide applications in vehicle routing, especially when the minimization of the latest service completion time is a critical performance measure. We have analyzed four typical variants of this problem, where the vehicles have either unlimited or limited capacities, and they start from either a given depot or any depot of a given depot set. We have developed approximation algorithms for these four variants, which achieve approximation ratios of max{3 ‐ 2/k,2}, 5, max{5 ‐ 2/k,4}, and 7, respectively. We have also analyzed the approximation hardness of these variants by showing that, unless P = NP , it is impossible for them to achieve approximation ratios less than 4/3, 3/2, 3/2, and 2, respectively. We have further extended the techniques and results developed for this problem to other min‐max vehicle routing problems.© 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Balancing perfectly periodic service schedules: An application from recycling and waste management

A national recycling and waste management company provides periodic services to its customers from over 160 service centers. The services are performed periodically in units of weeks over a planning horizon. The number of truck‐hours allocated to this effort is determined by the maximum weekly workload during the planning horizon. Therefore, minimizing the maximum weekly workload results in minimum operating expenses. The perfectly periodic service scheduling (PPSS) problem is defined based on the practices of the company. It is shown that the PPSS problem is strongly NP‐hard. Attempts to solve large instances by using an integer programming formulation are unsuccessful. Therefore, greedy BestFit heuristics with three different sorting schemes are designed and tested for six real‐world PPSS instances and 80 randomly generated data files. The heuristics provide effective solutions that are within 2% of optimality on average. When the best found BestFit schedules are compared with the existing schedules, it is shown that operational costs are reduced by 18% on average. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 160–171, 2012     

Optimal FCFS allocation rules for periodic‐review assemble‐to‐order systems

In Assemble‐To‐Order (ATO) systems, situations may arise in which customer demand must be backlogged due to a shortage of some components, leaving available stock of other components unused. Such unused component stock is called remnant stock. Remnant stock is a consequence of both component ordering decisions and decisions regarding allocation of components to end‐product demand. In this article, we examine periodic‐review ATO systems under linear holding and backlogging costs with a component installation stock policy and a First‐Come‐First‐Served (FCFS) allocation policy. We show that the FCFS allocation policy decouples the problem of optimal component allocation over time into deterministic period‐by‐period optimal component allocation problems. We denote the optimal allocation of components to end‐product demand as multimatching. We solve the multi‐matching problem by an iterative algorithm. In addition, an approximation scheme for the joint replenishment and allocation optimization problem with both upper and lower bounds is proposed. Numerical experiments for base‐stock component replenishment policies show that under optimal base‐stock policies and optimal allocation, remnant stock holding costs must be taken into account. Finally, joint optimization incorporating optimal FCFS component allocation is valuable because it provides a benchmark against which heuristic methods can be compared. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 158–169, 2015     

A stochastic air combat logistics decision model for Blue versus Red opposition

Technologically advanced aircraft rely on robust and responsive logistics systems to ensure a high state of operational readiness. This paper fills a critical gap in the literature for combat models by closely relating effectiveness of the logistics system to determinants of success in combat. We present a stochastic diffusion model of an aerial battle between Blue and Red forces. The number of aircraft of Blue forces aloft and ready to be aloft on combat missions is limited by the maximum number of assigned aircraft, the reliability of aircraft subsystems, and the logistic system's ability to repair and replenish those subsystems. Our parsimonious model can illustrate important trade‐offs between logistics decision variables and operational success.     

Stochastic regret minimization for revenue management problems with nonstationary demands

We study an admission control model in revenue management with nonstationary and correlated demands over a finite discrete time horizon. The arrival probabilities are updated by current available information, that is, past customer arrivals and some other exogenous information. We develop a regret‐based framework, which measures the difference in revenue between a clairvoyant optimal policy that has access to all realizations of randomness a priori and a given feasible policy which does not have access to this future information. This regret minimization framework better spells out the trade‐offs of each accept/reject decision. We proceed using the lens of approximation algorithms to devise a conceptually simple regret‐parity policy. We show the proposed policy achieves 2‐approximation of the optimal policy in terms of total regret for a two‐class problem, and then extend our results to a multiclass problem with a fairness constraint. Our goal in this article is to make progress toward understanding the marriage between stochastic regret minimization and approximation algorithms in the realm of revenue management and dynamic resource allocation. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 433–448, 2016     

Transshipment through crossdocks with inventory and time windows

A major challenge in making supply meet demand is to coordinate transshipments across the supply chain to reduce costs and increase service levels in the face of demand fluctuations, short lead times, warehouse limitations, and transportation and inventory costs. In particular, transshipment through crossdocks, where just‐in‐time objectives prevail, requires precise scheduling between suppliers, crossdocks, and customers. In this work, we study the transshipment problem with supplier and customer time windows where flow is constrained by transportation schedules and warehouse capacities. Transportation is provided by fixed or flexible schedules and lot‐sizing is dealt with through multiple shipments. We develop polynomial‐time algorithms or, otherwise, provide the complexity of the problems studied. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

Optimal path finding in direction,location, and time dependent environments

This article examines optimal path finding problems where cost function and constraints are direction, location, and time dependent. Recent advancements in sensor and data‐processing technology facilitate the collection of detailed real‐time information about the environment surrounding a ground vehicle, an airplane, or a naval vessel. We present a navigation model that makes use of such information. We relax a number of assumptions from existing literature on path‐finding problems and create an accurate, yet tractable, model suitable for implementation for a large class of problems. We present a dynamic programming model which integrates our earlier results for direction‐dependent, time and space homogeneous environment, and consequently, improves its accuracy, efficiency, and run‐time. The proposed path finding model also addresses limited information about the surrounding environment, control‐feasibility of the considered paths, such as sharpest feasible turns a vehicle can make, and computational demands of a time‐dependent environment. To demonstrate the applicability and performance of our path‐finding algorithm, computational experiments for a short‐range ship routing in dynamic wave‐field problem are presented. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

A cost-benefit analysis of military aircraft replacement policies

This paper describes a method of solving aircraft service life problems. The particular application concerns aircraft in the Naval Advanced Jet Training Command. The method of solution is comparative present value analysis of alternative replacement policies. The likely risks of estimation errors are reflected in the comparisons of present values. Differences are noted in the benefits associated with each policy, but external to Naval Aviation. Since the values of these benefits can be determined only at a higher level of decision-making, the result of the study is not a conclusive selection among policies, but a schedule of present values on the basis of which, together with values of the external benefits, a decision can be reached. This paper discusses replacement policies for aircraft used in the Naval Advanced Jet Pilot Training mission. Taking engineering technology and the training syllabus as given, four feasible plans for introducing replacement aircraft into service are evaluated in terms of the present values of differential costs associated with the plans and in terms of the likely errors in cost estimates used in calculation of the present values. The trade-off between present value of costs and planning flexibility is emphasized in choosing a recommended time pattern of aircraft replacement. The specific aircraft mixes considered are the TF–9J/TAF–9J and the TA–4F/A–4B. The first is the currently employed mix; the second is the proposed replacement. The problem is to select an optimal time-pattern of replacement of F–9's by A–4's, given technological differences favoring the A–4 and increasing costs of maintaining squadrons of F–9's. Replacements by aircraft types other than the A–4 are considered impractical. Four feasible plans for introducing A–4's through a 5-year period are evaluated in terms of current best estimates of the related costs of the plans and in terms of the flexibility of modifying each plan given future better information concerning the relevant costs. The method of analysis is comparative present value of expected costs.     

Split delivery routing

This article examines a relaxed version of the generic vehicle routing problem. In this version, a delivery to a demand point can be split between any number of vehicles. In spite of this relaxation the problem remains computationally hard. Since only small instances of the vehicle routing problem are known to be solved using exact methods, the vehicle route construction for this problem version is approached using heuristic rules. The main contribution of this article to the existing body of literature on vehicle routing issues in (a) is presenting a new vehicle routing problem amenable to practical applications, and (b) demonstrating the potential for cost savings over similar “traditional” vehicle routing when implementing the model and solutions presented here. The solution scheme allowing for split deliveries is compared with a solution in which no split deliveries are allowed. The comparison is conducted on six sets of 30 problems each for problems of size 75, 115, and 150 demand points (all together 540 problems). For very small demands (up to 10% of vehicle's capacity) no significant difference in solutions is evident for both solution schemes. For the other five problem sets for which point demand exceeds 10% of vehicle's capacity, very significant cost savings are realized when allowing split deliveries. The savings are significant both in the total distance and the number of vehicles required. The vehicles' routes constructed by our procedure tend to cover cohesive geographical zones and retain some properties of optimal solutions.     

AN ECONOMIC ANALYSIS OF SECURITY POLICIES

This paper analyses public policy choices in the security economy from an economic perspective. It discusses the role of public goods for national and global security and identifies the importance of the first‐ and second‐order indirect effects of insecurity on economic activity, which include the behavioural responses of agents and the government to security measures, akin to such effects in insurance economics. Furthermore, key public policy trade‐offs are outlined, in particular between security and efficiency, globalisation, equity and freedom. The analysis identifies suitable policy options for raising security in the national and international contexts and in view of these trade‐offs. A balance between market and non‐market instruments in achieving security should be aimed for in order to minimise the adverse effects of aiming for higher security. In addition, the public good nature of security implies that international coordination of security policies is important, despite this process being fraught with enforcement problems.     

Decomposing inventory routing problems with approximate value functions

We present a time decomposition for inventory routing problems. The methodology is based on valuing inventory with a concave piecewise linear function and then combining solutions to single‐period subproblems using dynamic programming techniques. Computational experiments show that the resulting value function accurately captures the inventory's value, and solving the multiperiod problem as a sequence of single‐period subproblems drastically decreases computational time without sacrificing solution quality. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

The loss‐averse newsvendor problem with supply options

In this article, we consider a loss‐averse newsvendor with stochastic demand. The newsvendor might procure options when demand is unknown, and decide how many options to execute only after demand is revealed. If the newsvendor reserves too many options, he would incur high reservation costs. Yet reserving too few could result in lost sales. So the newsvendor faces a trade‐off between reservation costs and losing sales. When there are multiple options available, the newsvendor has to consider how many units of each to reserve by studying the trade‐off between flexibility and costs. We show how the newsvendor's loss aversion behavior affects his ordering decision, and propose an efficient algorithm to compute his optimal solution in the general case with n options. We also present examples showing how the newsvendor's ordering strategy changes as loss aversion rises. © 2014 Wiley Periodicals, Inc. 62:46–59, 2015     

Optimal inventory control policy for periodic‐review inventory systems with inventory‐level‐dependent demand

We consider a setting in which inventory plays both promotional and service roles; that is, higher inventories not only improve service levels but also stimulate demand by serving as a promotional tool (e.g., as the result of advertising effect by the enhanced product visibility). Specifically, we study the periodic‐review inventory systems in which the demand in each period is uncertain but increases with the inventory level. We investigate the multiperiod model with normal and expediting orders in each period, that is, any shortage will be met through emergency replenishment. Such a model takes the lost sales model as a special case. For the cases without and with fixed order costs, the optimal inventory replenishment policy is shown to be of the base‐stock type and of the (s,S) type, respectively. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

Transformations of node‐balanced routing problems

This article describes a polynomial transformation for a class of unit‐demand vehicle routing problems, named node‐balanced routing problems (BRP), where the number of nodes on each route is restricted to be in an interval such that the workload across the routes is balanced. The transformation is general in that it can be applied to single or multiple depot, homogeneous or heterogeneous fleet BRPs, and any combination thereof. At the heart of the procedure lies transforming the BRP into a generalized traveling salesman problem (TSP), which can then be transformed into a TSP. The transformed graph exhibits special properties which can be exploited to significantly reduce the number of arcs, and used to construct a formulation for the resulting TSP that amounts to no more than that of a constrained assignment problem. Computational results on a number of instances are presented. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 370–387, 2015     

A generalized assignment model for dynamic supply chain capacity planning

We consider a generalization of the well‐known generalized assignment problem (GAP) over discrete time periods encompassed within a finite planning horizon. The resulting model, MultiGAP, addresses the assignment of tasks to agents within each time period, with the attendant single‐period assignment costs and agent‐capacity constraint requirements, in conjunction with transition costs arising between any two consecutive periods in which a task is reassigned to a different agent. As is the case for its single‐period antecedent, MultiGAP offers a robust tool for modeling a wide range of capacity planning problems occurring within supply chain management. We provide two formulations for MultiGAP and establish that the second (alternative) formulation provides a tighter bound. We define a Lagrangian relaxation‐based heuristic as well as a branch‐and‐bound algorithm for MultiGAP. Computational experience with the heuristic and branch‐and‐bound algorithm on over 2500 test problems is reported. The Lagrangian heuristic consistently generates high‐quality and in many cases near‐optimal solutions. The branch‐and‐bound algorithm is also seen to constitute an effective means for solving to optimality MultiGAP problems of reasonable size. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

A branch‐and‐cut algorithm for the quay crane scheduling problem in a container terminal

The quay crane scheduling problem consists of determining a sequence of unloading and loading movements for cranes assigned to a vessel in order to minimize the vessel completion time as well as the crane idle times. Idle times originate from interferences between cranes since these roll on the same rails and a minimum safety distance must be maintained between them. The productivity of container terminals is often measured in terms of the time necessary to load and unload vessels by quay cranes, which are the most important and expensive equipment used in ports. We formulate the quay crane scheduling problem as a vehicle routing problem with side constraints, including precedence relationships between vertices. For small size instances our formulation can be solved by CPLEX. For larger ones we have developed a branch‐and‐cut algorithm incorporating several families of valid inequalities, which exploit the precedence constraints between vertices. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Benders decomposition with alternative multiple cuts for a multi‐product closed‐loop supply chain network design model

In this article, we consider a multi‐product closed‐loop supply chain network design problem where we locate collection centers and remanufacturing facilities while coordinating the forward and reverse flows in the network so as to minimize the processing, transportation, and fixed location costs. The problem of interest is motivated by the practice of an original equipment manufacturer in the automotive industry that provides service parts for vehicle maintenance and repair. We provide an effective problem formulation that is amenable to efficient Benders reformulation and an exact solution approach. More specifically, we develop an efficient dual solution approach to generate strong Benders cuts, and, in addition to the classical single Benders cut approach, we propose three different approaches for adding multiple Benders cuts. These cuts are obtained via dual problem disaggregation based either on the forward and reverse flows, or the products, or both. We present computational results which illustrate the superior performance of the proposed solution methodology with multiple Benders cuts in comparison to the branch‐and‐cut approach as well as the traditional Benders decomposition approach with a single cut. In particular, we observe that the use of multiple Benders cuts generates stronger lower bounds and promotes faster convergence to optimality. We also observe that if the model parameters are such that the different costs are not balanced, but, rather, are biased towards one of the major cost categories (processing, transportation or fixed location costs), the time required to obtain the optimal solution decreases considerably when using the proposed solution methodology as well as the branch‐and‐cut approach. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Outsourcing warranty repairs: Dynamic allocation

In this paper we consider the problem of minimizing the costs of outsourcing warranty repairs when failed items are dynamically routed to one of several service vendors. In our model, the manufacturer incurs a repair cost each time an item needs repair and also incurs a goodwill cost while an item is awaiting and undergoing repair. For a large manufacturer with annual warranty costs in the tens of millions of dollars, even a small relative cost reduction from the use of dynamic (rather than static) allocation may be practically significant. However, due to the size of the state space, the resulting dynamic programming problem is not exactly solvable in practice. Furthermore, standard routing heuristics, such as join‐the‐shortest‐queue, are simply not good enough to identify potential cost savings of any significance. We use two different approaches to develop effective, simply structured index policies for the dynamic allocation problem. The first uses dynamic programming policy improvement while the second deploys Whittle's proposal for restless bandits. The closed form indices concerned are new and the policies sufficiently close to optimal to provide cost savings over static allocation. All results of this paper are demonstrated using a simulation study. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005