A stochastic constrained optimal replacement model

In this paper a stochastically constrained replacement model is formulated. This model determines a sequence of replacement dates such that the total “current account” cost of all future costs and capital expenditures over an infinite time horizon for the n initial incumbent machines is minimized subject to the constraints that an expected number of machines are in a chosen utility class at any point in time. We then indicate one possible solution method for the model.     

Estimation from binomial data with classifiers of known and unknown imperfections

Observations from inspection by a “test” method and a standard method are combined to provide estimators of population proportion, and of probabilities of misclassification for the test method. Results of Hochberg and Tenenbein [3] and of Albers and Veldman [1] are extended to the case where the standard method is not perfect, but its misclassification probabilities have known values. Both moment and maximum-likelihood estimators are considered and some asymptotic properties of the resulting estimators are compared.     

On the first time a separately maintained parallel system has been down for a fixed time

Consider a system consisting of n separately maintained independent components where the components alternate between intervals in which they are “up” and in which they are “down”. When the i^th component goes up [down] then, independent of the past, it remains up [down] for a random length of time, having distribution F_i[G_i], and then goes down [up]. We say that component i is failed at time t if it has been “down” at all time points s ?[t-A.t]: otherwise it is said to be working. Thus, a component is failed if it is down and has been down for the previous A time units. Assuming that all components initially start “up,” let T denote the first time they are all failed, at which point we say the system is failed. We obtain the moment-generating function of T when n = l, for general F and G, thus generalizing previous results which assumed that at least one of these distributions be exponential. In addition, we present a condition under which T is an NBU (new better than used) random variable. Finally we assume that all the up and down distributions F_i and G_i i = l,….n, are exponential, and we obtain an exact expression for E(T) for general n; in addition we obtain bounds for all higher moments of T by showing that T is NBU.     

On queues with dependent interarrival and service times

AnM/G/1 queueing system is studied in which the service time required by a customer is dependent on the interarrival time between his arrival and that of his predecessor Assuming the two variables are “associated,” we prove that the expected delay in this system is less than or equal to than of a conventional M/G/1 queue This conclusion has been verified via simulation by Mitchell and Paulson [9] for a special class of dependent M/M/1 queue. Their model is a special case of the one we consider here. We also study another modified GI/G/1 queue. where the arrival process and/or the service process are individually “associated”.     

Optimal switchover times between two activities utilizing the same resource

The “gold‐mining” decision problem is concerned with the efficient utilization of a delicate mining equipment working in a number of different mines. Richard Bellman was the first to consider this type of a problem. The solution found by Bellman for the finite‐horizon, continuous‐time version of the problem with two mines is not overly realistic since he assumed that fractional parts of the same mining equipment could be used in different mines and this fraction could change instantaneously. In this paper, we provide some extensions to this model in order to produce more operational and realistic solutions. Our first model is concerned with developing an operational policy where the equipment may be switched from one mine to the other at most once during a finite horizon. In the next extension we incorporate a cost component in the objective function and assume that the horizon length is not fixed but it is the second decision variable. Structural properties of the optimal solutions are obtained using nonlinear programming. Each model and its solution is illustrated with a numerical example. The models developed here may have potential applications in other areas including production of items requiring the same machine or choosing a sequence of activities requiring the same resource. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 186–203, 2002; DOI 10.1002/nav.10008     

The capital supply curve in capacity expansion models: Some economic and algorithmic aspects

Capacity expansion models typically minimize the discounted cost of acquisition and operation over a given planning horizon. In this article we generalize this idea to one in which a capital supply curve replaces the usual discount rate. A capital supply curve is a means to model financial outlook, investment limits, and risk. We show that when such a curve is included in a capacity expansion model, it will, under certain conditions, provide a less capital intensive solution than one which incorporates a discount rate. In this article, we also provide an algorithm that solves capacity expansion models that incorporate a capital supply curve. The attractive feature of this algorithm is that it provides a means to utilize the “discount rate” models efficiently. Throughout, we give applications in power generation planning and computational experience for this application is also presented.     

Minimax surveillance schedules for replaceable units

An analysis is made of the problem of finding optimal schedules for checking an operating unit subject to random failure detectable only by inspection of the unit. It is assumed that only partial information, in the form of .a single percentile of the otherwise unknown life distribution of the unit, is available. In a previous paper [5] some results were given for the case with a finite time horizon. Tn this work it is assumed that tne unit is replaceable at will with a new, statistically identical unit, and the horizon is infinite.     

On the optimality of the bayes prediction policy in two-echelon multistation inventory models

The present paper provides a proof that the Bayes prediction ordering policy developed in [3] is an optimal policy, in the sense that it minimizes the total expected discounted cost of ordering for any finite planning horizon.     

Recent articles on partial backorders: Comment

This note points out the omission of a simple but vital constraint in the recent articles on partial backlogging. Also, a simple intuitive interpretation of the “backorder” inequality of [2], [3], and [4] is provided.     

Queueing models for spares provisioning

A population of items which break down at random times and require repair is studied (the classic “machine repair problem with spares”). It is desired to determine the number of repair channels and spares required over a multiyear planning horizon in which population size and component reliability varies, and a service level constraint is imposed. When an item fails, a spare (if available) is immediately dispatched to replace the failed item. The failed item is removed, transported to the repair depot, repaired, and then placed in the spares pool (which is constrained to be empty not more than 10% of the time) unless there is a backlog of requests for spares, in which case it is dispatched immediately. The first model considered treats removal, transportation, and repair as one service operation. The second model is a series queue which allows for the separate treatment of removal, transportation, and repair. Breakdowns are assumed Poisson and repair times exponential.     

Strategic capacity decision‐making in a stochastic manufacturing environment using real‐time approximate dynamic programming

In this study, we illustrate a real‐time approximate dynamic programming (RTADP) method for solving multistage capacity decision problems in a stochastic manufacturing environment, by using an exemplary three‐stage manufacturing system with recycle. The system is a moderate size queuing network, which experiences stochastic variations in demand and product yield. The dynamic capacity decision problem is formulated as a Markov decision process (MDP). The proposed RTADP method starts with a set of heuristics and learns a superior quality solution by interacting with the stochastic system via simulation. The curse‐of‐dimensionality associated with DP methods is alleviated by the adoption of several notions including “evolving set of relevant states,” for which the value function table is built and updated, “adaptive action set” for keeping track of attractive action candidates, and “nonparametric k nearest neighbor averager” for value function approximation. The performance of the learned solution is evaluated against (1) an “ideal” solution derived using a mixed integer programming (MIP) formulation, which assumes full knowledge of future realized values of the stochastic variables (2) a myopic heuristic solution, and (3) a sample path based rolling horizon MIP solution. The policy learned through the RTADP method turned out to be superior to polices of 2 and 3. © 2010 Wiley Periodicals, Inc. Naval Research Logistics 2010     

The stability of the nuclear nonproliferation norm: a critique of norm-contestation theory

This article argues that the nuclear nonproliferation norm (NNPN) is a social fact with a relatively independent life of its own and that it has a powerful impact on the behavior of both nuclear-weapon states (NWS) and non-nuclear-weapon states (NNWS). It challenges the application of critical constructivist research on norms to the NNPN and the idea that its legitimacy and structural power depend on contestation “all the way down.” State and non-state actors play an important role in explaining the dynamics of the NNPN, but agential constructivism runs the danger of “throwing the baby out with the bath water,” neglecting the structural impact of the NNPN on state behavior. The article examines the limitations of norm-contestation theory, arguing that some norms are more resistant to contestation than others. The NNPN is more difficult to contest than new norms (such as the Responsibility to Protect) because it is rooted in fifty years of nonproliferation nuclear diplomacy. The US-India nuclear deal is not a case of “norm change” but a violation of the NNPN. The “core” of the NNPN has not changed since the US-India nuclear deal. The conflict confronting NWS and NNWS is about the implementation of “type 2” norms (organizing principles) and “type 3” norms (standardized procedures), and not about the “hard core” of the NNPN.     

Dynamic pricing in a trade-in program with replacement and new customers

Trade-in programs have been widely adopted to enhance repeat purchase from replacement customers. Considering that a market consists of replacement and new segments, we study the joint and dynamic decisions on the selling price of new product (hereafter, “selling price”) and the trade-in price involved in the program. By adopting a vertical product differentiation choice model, we investigate two scenarios in this paper. In the base model, the manufacturer has sufficiently large production capacity to fulfill the customer demand. We characterize the structural properties of the joint pricing decisions and compare them with the optimal pricing policy under regular selling. We further propose a semi-dynamic trade-in program, under which the new product is sold at a fixed price and the trade-in price can be adjusted dynamically. Numerical experiments are conducted to evaluate the performance of the dynamic and semi-dynamic trade-in programs. In an extended model, we consider the scenario in which the manufacturer stocks a batch of new products in the beginning of the selling horizon and the inventory cannot be replenished. Following a revenue management framework, we characterize the structural properties with respect to time period and inventory level of new products.     

From the people's army to the Jewish people's army: the IDF's force structure between professionalization and militarization

The article discusses processes of “religionization” within the institutional identity and ethos of the Israel Defense Forces (IDF) and the connection of these processes with the significant structural changes the IDF has undergone in recent decades. The main argument presented is that since the late 1980s, the IDF has been in a culture conflict, torn between soldiers and civilians who advocate turning the IDF into a professional army “military professionalization,” and others who wish to preserve, and even strengthen, the “people's army” model. The present article shows that the meaning of the term “people” in this phrase has shifted to refer strictly to the Jewish people, and that a national-ethnic perception strongly influenced by religious-national ideology has been adopted.     

等截面隔离段中激波串结构的数值模拟

采用二阶TVD格式的有限体积法偶合Baldwin Lomax代数湍流模型求解雷诺平均Navier stokes方程 ,数值模拟了二维矩形等截面隔离段中的流动现象 ,很好地模拟出由激波 /附面层干扰所形成的复杂的激波串流场结构。计算结果与国外有关文献的结果进行了比较。     

An approximate planning model for distributed computing networks

We develop an approximate planning model for a distributed computing network in which a control system oversees the assignment of information flows and tasks to a pool of shared computers, and describe several optimization applications using the model. We assume that the computers are multithreaded, and have differing architectures leading to varying and inconsistent processing rates. The model is based on a discrete‐time, continuous flow model developed by Graves [Oper Res 34 (1986), 522–533] which provides the steady‐state moments of production and work‐in‐queue quantities. We make several extensions to Graves' model to represent distributed computing networks. First, we approximately model control rules that are nonlinear functions of the work‐in‐queue at multiple stations through a linearization approach. Second, we introduce an additional noise term on production and show its use in modeling the discretization of jobs. Third, we model groups of heterogeneous computers as aggregate, “virtual computing cells” that process multiple tasks simultaneously, using a judiciously selected control rule. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

The dynamic lot-sizing model with backlogging: A simple o(n log n) algorithm and minimal forecast horizon procedure

We develop a simple O(n log n) solution method for the standard lot-sizing model with backlogging and a study horizon of n periods. Production costs are fixed plus linear and holding and backlogging costs are linear with general time-dependent parameters. The algorithm has linear [O(n)] time complexity for several important subclasses of the general model. We show how a slight adaptation of the algorithm can be used for the detection of a minimal forecast horizon and associated planning horizon. The adapted algorithm continues to have complexity O(n log n) or O(n) for the above-mentioned subclasses of the general model. © 1993 John Wiley & Sons, Inc.     

A Lanchester-type aggregated-force model of conventional ground combat

This article develops a Lanchester-type model of large-scale conventional ground combat between two opposing forces in a “sector”. It is shown that nonlinear Helmbold-type equations of warfare with operational losses may be used to represent the loss-rate curves that have been used in many aggregated-force models. These nonlinear differential equations are used to model the attrition of combat capability (as quantified by a so-called firepower index) in conjunction with a rate-of-advance equation that relates motion of the contact zone (or FEBA) between the opposing forces to the force ratio and tactical decisions of the combatants. This simplified auxiliary model is then used to develop some important insights into the dynamics of FEBA movement used in large-scale aggregated-force models. Different types of behavior for FEBA movement over time are shown to correspond to different ranges of values for the initial force ratio, for example, an attack will “stall out” for a range of initial force ratios above a specific threshold value, but it will “break out” for force ratios above a second specific threshold value. Such FEBA-movement predictions are essentially based on being able to forecast changes over time in the force ratio.     

Inventory rotation policies for slow moving items

In this article we present a stochastic model for determining inventory rotation policies for a retail firm which must stock many hundreds of distinctive items having uncertain heterogeneous sales patterns. The model develops explicit decision rules for determining (1) the length of time that an item should remain in inventory before the decision is made on whether or not to rotate the item out of inventory and (2) the minimum sales level necessary for retaining the item in inventory. Two inventory rotation policies are developed, the first of which maximizes cumulative expected sales over a finite planning horizon and the second of which maximizes cumulative expected profit. We also consider the statistical behavior of items having uncertain, discrete, and heterogeneous sales patterns using a two-period prediction methodology where period 1 is used to accumulate information on individual sales rates and this knowledge is then used, in a Bayesian context, to make sales predictions for period 2. This methodology assumes that over an arbitrary time interval sales for each item are Poisson with unknown but stationary mean sales rates and the mean sales rates are distributed gamma across all items. We also report the application of the model to a retail firm which stocks many hundreds of distinctive unframed poster art titles. The application provides some useful insights into the behavior of the model as well as some interesting aspects pertaining to the implementation of the results in a “real-world” situation.     

Changing the paradigm: Simulation,now a method of first resort

Decades ago, simulation was famously characterized as a “method of last resort,” to which analysts should turn only “when all else fails.” In those intervening decades, the technologies supporting simulation—computing hardware, simulation‐modeling paradigms, simulation software, design‐and‐analysis methods—have all advanced dramatically. We offer an updated view that simulation is now a very appealing option for modeling and analysis. When applied properly, simulation can provide fully as much insight, with as much precision as desired, as can exact analytical methods that are based on more restrictive assumptions. The fundamental advantage of simulation is that it can tolerate far less restrictive modeling assumptions, leading to an underlying model that is more reflective of reality and thus more valid, leading to better decisions. Published 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 293–303, 2015