On ordering perishable inventory under erlang demand

Existing models for describing optimal ordering policies for perishable inventory cast the problem as a multidimensional dynamic program, the dimensionality being one less than the product lifetime in periods. An approach developed in previous work takes explicit account of outdating in the single period model. Formulas for the expected quantity of any new order which will outdate are developed for the case where the demand has a stationary Erlang distribution. A modified version of the one period model is shown to yield a reasonable approximation to the stationary optimal policy.     

Performance of heuristics for the uncapacitated lot-size problem

Although the uncapacitated lot-size problem can be solved optimally very efficiently, heuristics are often used instead in practice. Recent research on the performance of these heuristics has focused on worst-case analysis and empirical testing. This article extends earlier worst-case results, for several of the commonly used heuristics, to more specific problem classes to obtain a better understanding of when a heuristic can be expected to perform well and when it is likely to perform poorly. In particular, we obtain bounds for the finite-horizon problem (earlier results all assume an infinite horizon) and for problems in which demand is (i) constant, and (ii) bounded from above or below. We also show how the heuristics can be classified into three categories, with heuristics in each category using similar rules to construct feasible production schedules. Using this categorization, our analysis reveals that a small change in the definition of a heuristic can often have a significant impact on its performance. © 1992 John Wiley & Sons, Inc.     

The continuous‐time single‐sourcing problem with capacity expansion opportunities

This paper develops a new model for allocating demand from retailers (or customers) to a set of production/storage facilities. A producer manufactures a product in multiple production facilities, and faces demand from a set of retailers. The objective is to decide which of the production facilities should satisfy each retailer's demand, in order minimize total production, inventory holding, and assignment costs (where the latter may include, for instance, variable production costs and transportation costs). Demand occurs continuously in time at a deterministic rate at each retailer, while each production facility faces fixed‐charge production costs and linear holding costs. We first consider an uncapacitated model, which we generalize to allow for production or storage capacities. We then explore situations with capacity expansion opportunities. Our solution approach employs a column generation procedure, as well as greedy and local improvement heuristic approaches. A broad class of randomly generated test problems demonstrates that these heuristics find high quality solutions for this large‐scale cross‐facility planning problem using a modest amount of computation time. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

Yield randomness,cost tradeoffs,and diversification in the EOQ model

Existing production/inventory models with random (variable) yield take the yield distribution as given. This work takes a step towards selecting the optimal yield randomness, jointly with lot sizing decisions. First, we analyze an EOQ model where yield variance and lot size are to be selected simultaneously. Two different cost structures are considered. Secondly, we consider source diversification (‘second sourcing’) as a means of reducing effective yield randomness, and trade its benefits against its costs. Conditions for the superiority of diversification between two sources with distinct yield distributions over a single source are derived. The optimal number of identical sources is also analyzed. Some comments on the congruence of the results with recent JIT practices are provided.     

An improved algorithm for the dynamic lot-sizing problem with learning effect in setups

The dynamic lot-sizing problem with learning in setups is a variation of the Wagner-Whitin lot-sizing problem where the setup costs are a concave, nondecreasing function of the cumulative number of setups. This problem has been a subject of some recent research. We extend the previously studied model to include nonstationary production costs and present an O(T²) algorithm to solve this problem. The worst-case complexity of our algorithm improves the worst-case behavior of the algorithms presently known in the literature. © 1993 John Wiley & Sons, Inc.     

Multiperiod resource allocation with a smoothing objective

We consider a multiperiod resource allocation problem, where a single resource is allocated over a finite planning horizon of T periods. Resource allocated to one period can be used to satisfy demand of that period or of future periods, but backordering of demand is not allowed. The objective is to allocate the resource as smoothly as possible throughout the planning horizon. We present two models: the first assumes that the allocation decision variables are continuous, whereas the second considers only integer allocations. Applications for such models are found, for example, in subassembly production planning for complex products in a multistage production environment. Efficient algorithms are presented to find optimal allocations for these models at an effort of O(T²). Among all optimal policies for each model, these algorithms find the one that carries the least excess resources throughout the planning horizon. © 1995 John Wiley & Sons, Inc.     

A single-period,multi-echelon stochastic model under a mix of assemble to order and assemble in advance policies

This article presents a stochastic model for a single-period production system composed of several assembly/processing and storage facilities in series. The production system operates under a composite strategy of the assemble to order and assemble in advance policies. The developed mathematical model is simpler and more compact than the ones provided in earlier articles. Moreover, the formulation allows the optimal inventory levels at the start of the period to be determined from the solution to the well-known newsboy problem. We also analyze the problem under the free distribution approach which only assumes the knowledge of the first two moments of the demand distribution. The robustness of this approach is tested by carrying an extensive experimental comparison using different demand distributions. Finally, the composite model is extended by considering the effects of some budgetary constraints. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 599–614, 1998     

The impact of demand uncertainty on product line design under endogenous substitution

The existing product line design literature devotes little attention to the effect of demand uncertainty. Due to demand uncertainty, the supply‐demand mismatch is inevitable which leads to different degrees of lost sales depending on the configuration of product lines. In this article, we adopt a stylized two‐segment setup with uncertain market sizes and illustrate the interplay between two effects: risk pooling that mitigates the impact of demand uncertainty and market segmentation that facilitates consumer differentiation. Compared to downward substitution, inducing bidirectional substitution through product line decisions including quality levels and prices can yield greater risk pooling effects. However, we show that the additional benefit from the risk pooling effect cannot compensate for the reduced market segmentation effect. We demonstrate that the presence of demand uncertainty can reduce the benefit of market segmentation and therefore the length of product lines in terms of the difference between products. We also propose three heuristics that separate product line and production decisions; each of these heuristics corresponds to one particular form of demand substitution. Our numerical studies indicate that the best of the three heuristics yields performance that is close to optimality. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 143–157, 2015     

Note: Dynamic lot sizing for a finite rate input process

The basic single-product dynamic lot-sizing problem involves determining the optimal batch production schedule to meet a deterministic, discrete-in-time, varying demand pattern subject to linear setup and stockholding costs. The most widely known procedure for deriving the optimal solution is the Wagner-Whitin algorithm, although many other approaches have subsequently been developed for tackling the same problem. The objective of this note is to show how these procedures can readily be adapted when the input is a finite rate production process. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 221–228, 1997     

An analysis of single item inventory systems with returns

Inventory systems with returns are systems in which there are units returned in a repairable state, as well as demands for units in a serviceable state, where the return and demand processes are independent. We begin by examining the control of a single item at a single location in which the stationary return rate is less than the stationary demand rate. This necessitates an occasional procurement of units from an outside source. We present a cost model of this system, which we assume is managed under a continuous review procurement policy, and develop a solution method for finding the policy parameter values. The key to the analysis is the use of a normally distributed random variable to approximate the steady-state distribution of net inventory. Next, we study a single item, two echelon system in which a warehouse (the upper echelon) supports N(N ? 1) retailers (the lower echelon). In this case, customers return units in a repairable state as well as demand units in a serviceable state at the retailer level only. We assume the constant system return rate is less than the constant system demand rate so that a procurement is required at certain times from an outside supplier. We develop a cost model of this two echelon system assuming that each location follows a continuous review procurement policy. We also present an algorithm for finding the policy parameter values at each location that is based on the method used to solve the single location problem.     

Multi-item service constrained (s,S) policies for spare parts logistics systems

Many organizations providing service support for products or families of products must allocate inventory investment among the parts (or, identically, items) that make up those products or families. The allocation decision is crucial in today's competitive environment in which rapid response and low levels of inventory are both required for providing competitive levels of customer service in marketing a firm's products. This is particularly important in high-tech industries, such as computers, military equipment, and consumer appliances. Such rapid response typically implies regional and local distribution points for final products and for spare parts for repairs. In this article we fix attention on a given product or product family at a single location. This single-location problem is the basic building block of multi-echelon inventory systems based on level-by-level decomposition, and our modeling approach is developed with this application in mind. The product consists of field-replaceable units (i.e., parts), which are to be stocked as spares for field service repair. We assume that each part will be stocked at each location according to an (s, S) stocking policy. Moreover, we distinguish two classes of demand at each location: customer (or emergency) demand and normal replenishment demand from lower levels in the multiechelon system. The basic problem of interest is to determine the appropriate policies (s_i S_i) for each part i in the product under consideration. We formulate an approximate cost function and service level constraint, and we present a greedy heuristic algorithm for solving the resulting approximate constrained optimization problem. We present experimental results showing that the heuristics developed have good cost performance relative to optimal. We also discuss extensions to the multiproduct component commonality problem.     

Optimal ordering policies when anticipating parameter changes in EOQ systems

The classical Economic Order Quantity Model requires the parameters of the model to be constant. Some EOQ models allow a single parameter to change with time. We consider EOQ systems in which one or more of the cost or demand parameters will change at some time in the future. The system we examine has two distinct advantages over previous models. One obvious advantage is that a change in any of the costs is likely to affect the demand rate and we allow for this. The second advantage is that often, the times that prices will rise are fairly well known by announcement or previous experience. We present the optimal ordering policy for these inventory systems with anticipated changes and a simple method for computing the optimal policy. For cases where the changes are in the distant future we present a myopic policy that yields costs which are near-optimal. In cases where the changes will occur in the relatively near future the optimal policy is significantly better than the myopic policy.     

Dynamic learning,pricing, and ordering by a censored newsvendor

We address the problem of determining optimal ordering and pricing policies in a finite‐horizon newsvendor model with unobservable lost sales. The demand distribution is price‐dependent and involves unknown parameters. We consider both the cases of perishable and nonperishable inventory. A very general class of demand functions is studied in this paper. We derive the optimal ordering and pricing policies as unique functions of the stocking factor (which is a linear transformation of the safety factor). An important expression is obtained for the marginal expected value of information. As a consequence, we show when lost sales are unobservable, with perishable inventory the optimal stocking factor is always at least as large as the one given by the single‐period model; however, if inventory is nonperishable, this result holds only under a strong condition. This expression also helps to explain why the optimal stocking factor of a period may not increase with the length of the problem. We compare this behavior with that of a full information model. We further examine the implications of the results to the special cases when demand uncertainty is described by additive and multiplicative models. For the additive case, we show that if demand is censored, the optimal policy is to order more as well as charge higher retail prices when compared to the policies in the single‐period model and the full information model. We also compare the optimal and myopic policies for the additive and multiplicative models. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Optimal job splitting on a multi‐slot machine with applications in the printing industry

In this article, we define a scheduling/packing problem called the Job Splitting Problem, motivated by the practices in the printing industry. There are n types of items to be produced on an m‐slot machine. A particular assignment of the types to the slots is called a “run” configuration and requires a setup cost. Once a run begins, the production continues according to that configuration and the “length” of the run represents the quantity produced in each slot during that run. For each unit of production in excess of demand, there is a waste cost. Our goal is to construct a production plan, i.e., a set of runs, such that the total setup and waste cost is minimized. We show that the problem is strongly NP‐hard and propose two integer programming formulations, several preprocessing steps, and two heuristics. We also provide a worst‐case bound for one of the heuristics. Extensive tests on real‐world and randomly generated instances show that the heuristics are both fast and effective, finding near‐optimal solutions. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

The inventory packing problem

We study the problem of finding the minimum number of identical storage areas required to hold n items for which demand is known and constant. The replenishments of the items within a single storage area may be time phased so as to minimize the maximum total storage capacity required at any time. This is the inventory-packing problem, which can be considered as a variant of the well-known bin-packing problem, where one constraint is nonlinear. We study the worst-case performance of six heuristics used for that earlier problem since the recognition version of the inventory-packing problem is shown to be NP complete. In addition, we describe several new heuristics developed specifically for the inventory-packing problem, and also study their worst-case performance. Any heuristic which only opens a bin when an item will not fit in any (respectively, the last) open bin needs, asymptotically, no more than 25/12 (resp., 9/4) times the optimal number of bins. Improved performance bounds are obtainable if the range from which item sizes are taken is known to be restricted. Extensive computational testing indicates that the solutions delivered by these heuristics are, for most problems, very close to optimal in value.     

(R.Q) inventory problem with unknown mean demand and learning

We address a single product, continuous review model with stationary Poisson demand. Such a model has been effectively studied when mean demand is known. However, we are concerned with managing new items for which only a Bayesian prior distribution on the mean is available. As demand occurs, the prior is updated and our control parameters are revised. These include the reorder point (R) and reorder quantity (Q). Deemer, taking a clue from some earlier RAND work, suggested using a model appropriate for known mean, but using a Compound Poisson distribution for demand rather than Poisson to reflect uncertainty about the mean. Brown and Rogers also used this approach but within a periodic review context. In this paper we show how to compute optimum reorder points for a special problem closely related to the problem of real interest. In terms of the real problem, subject to a qualification to be discussed, the reorder points found are upper bounds for the optimum. At the same time, the reorder points found can never exceed those found by the Compound Poisson (Deemer) approach. And they can be smaller than those found when there is no uncertainty about the mean. As a check, the Compound Poisson and proposed approach are compared by simulation.     

An adaptive forecasting algorithm and inventory policy for products with short life cycles

Products with short life cycles are becoming increasingly common in many industries, such as the personal computer (PC) and mobile phone industries. Traditional forecasting methods and inventory policies can be inappropriate for forecasting demand and managing inventory for a product with a short life cycle because they usually do not take into account the characteristics of the product life cycle. This can result in inaccurate forecasts, high inventory cost, and low service levels. Besides, many forecasting methods require a significant demand history, which is available only after the product has been sold for some time. In this paper, we present an adaptive forecasting algorithm with two characteristics. First, it uses structural knowledge on the product life cycle to model the demand. Second, it combines knowledge on the demand that is available prior to the launch of the product with actual demand data that become available after the introduction of the product to generate and update demand forecasts. Based on the forecasting algorithm, we develop an optimal inventory policy. Since the optimal inventory policy is computationally expensive, we propose three heuristics and show in a numerical study that one of the heuristics generates near‐optimal solutions. The evaluation of our approach is based on demand data from a leading PC manufacturer in the United States, where the forecasting algorithm has been implemented. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

Integrated scheduling of loading and transportation with tractors and semitrailers separated

Motivated by some practical applications, we study a new integrated loading and transportation scheduling problem. Given a set of jobs, a single crane is available to load jobs, one by one, onto semitrailers with a given capacity. Loaded semitrailers are assigned to tractors for transportation tasks. Subject to limited resources (crane, semitrailers, and tractors), the problem is to determine (1) an assignment of jobs to semitrailers for loading tasks, (2) a sequence for the crane to load jobs onto semitrailers, (3) an assignment of loaded semitrailers to tractors for transportation tasks, and (4) a transportation schedule of assigned tractors such that the completion time of the last transportation task is minimized. We first formulate the problem as a mixed integer linear programming model (MILPM) and prove that the problem is strongly NP‐hard. Then, optimality properties are provided which are useful in establishing an improved MILPM and designing solution algorithms. We develop a constructive heuristic, two LP‐based heuristics, and a recovering beam search heuristic to solve this problem. An improved procedure for solutions by heuristics is also presented. Furthermore, two branch‐and‐bound (B&B) algorithms with two different lower bounds are developed to solve the problem to optimality. Finally, computational experiments using both real data and randomly generated data demonstrate that our heuristics are highly efficient and effective. In terms of computational time and the number of instances solved to optimality in a time limit, the B&B algorithms are better than solving the MILPM. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 416–433, 2015     

Coordinated dynamic control of marketing and production

We study the dynamic profit maximization problem for a firm exercising control on both marketing and production. The firs marketing effort impacts the current‐period demand, which in turn affects future demand in a dissipating fashion. Under linear‐cost and zero‐leadtime assumptions, we show that the firm should follow base‐point rules for both marketing and production, whereas trends of the base points reflect a certain complementarity between marketing and production. We obtain comparable results when marketing costs are convex. Our computational study identifies conditions under which simple fixed‐marketing‐effort and fixed‐marketing‐target heuristics would perform well. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009