航空发动机在超声速引射系统中的应用分析

航空发动机可以对空气增压,并且增加气流温度,理论上存在应用于超声速引射系统的可能。分析了气源对引射器性能的影响以及引气对航空发动机的影响,介绍了3种航空发动机在超声速引射系统中可能的布局方案。针对某领域内的排气参数要求,分别对3种布局方案进行了计算分析。计算结果表明,当上游气体压强为0.044×10⁵ Pa和0.029 3×10⁵ Pa时,通过合理选择发动机的布局以及工作参数,发动机可以直接将上游气体排出或者作为驱动气源应用于超声速引射系统。     

石英纤维增强苯并噁嗪树脂复合材料研究

对苯并(啞心)嗪树脂应用于RTM工艺制备石英纤维增强复合材料进行了研究.系统考察了该树脂的工艺性能及力学性能,制备并测试了石英/苯并(啞心)嗪复合材料的力学性能及耐烧蚀性能,并将相关性能与钡酚醛与石英/钡酚醛进行了比较.结果表明,在85℃～145℃温度区间内苯并(啞心)嗪树脂粘度保持在800mPa·s以下,树脂具有较宽的低粘度温度平台和较长的低粘度保持时间.力学性能及耐烧蚀性能研究表明,石英/苯并(啞心)嗪复合材料的层间剪切强达到了61.5MPa,拉伸强度和弯曲强度显著优于石英,钡酚醛复合材料,质量烧蚀率和线烧蚀率分别为0.0510g·s-1和0.032mm·s-1.石英/苯并(啞心)嗪复合材料是一种可采用RTM工艺制备的耐烧蚀材料.     

酚醛-石英混杂纤维增强苯并噁嗪复合材料高温失效特征

通过模压工艺制备了酚醛-石英混织纤维增强苯并噁嗪复合材料(P-Q/BZ)试样,考察了其力学性能、烧蚀性能和耐冲刷性能,分析了该试样在高温环境中的主要失效特征,研究其在高温环境中的适用性。结果表明,未经热处理的P-Q/BZ试样平均弯曲强度、弯曲模量和层间剪切强度分别为283 MPa、10.8 GPa和22.6 MPa;经300℃,N_2处理15 min后,试样均匀膨胀,厚度增加22%,弯曲强度、弯曲模量和层间剪切强度分别下降58%、41%和58%;在氧乙炔焰的平均质量烧蚀率和线烧蚀率分别为0.048 4 g/s和-0.081 mm/s,烧蚀后试样宏观不分层,表面炭层微观分层严重,酚醛纤维热解炭、树脂基体热解炭、熔融石英纤维以及碳硅氧化产物相互分离;该试样耐冲刷能力差,在发动机尾焰烧蚀平台模拟的热-力耦合环境中的质量损失率高达59%。P-Q/BZ复合材料需要解决热解膨胀问题,进一步提高抗冲刷性能。     

碳-酚醛材料烧蚀热解对再入流场特性影响的数值计算

数值模拟存在碳-酚醛材料烧蚀的高超声速再入流场,分析烧蚀和热解对流场热化学参数、电子数密度分布等的影响。采用19组元双温度的热化学模型,耦合热化学非平衡流Navier-Stokes方程组和烧蚀壁面边界条件,进行定常烧蚀流场求解;通过对比无烧蚀、非催化和辐射平衡壁温条件下的流场分析烧蚀的影响;讨论了壁面处碳-酚醛材料热解产物化学组成的确定方法,研究了不同热解率的影响。以RAM-C球锥的两个典型飞行条件(速度7.65km/s、高度61km和71km)为代表的研究表明:最主要的烧蚀热解产物是CO、H2、H,烧蚀产物和烧蚀的影响均局限于边界层内;烧蚀使原子和离子组元含量下降,当离子组元含量峰值出现在边界层内时,烧蚀使电子数密度峰值下降;随热解率增加烧蚀影响程度增强,烧蚀在后身区影响范围大于头部区,随飞行高度增加烧蚀影响范围扩大。     

复合材料单面胶接修复含中心裂纹铝合金板的疲劳特性分析

利用ANSYS有限元分析软件,建立了复合材料单面胶接修复铝合金裂纹板的裂纹长度参数化的有限元模型,分析了修复结构的裂纹尖端应力强度因子及其变化幅值的规律;与试验测试结果相结合,得到了描述修复结构疲劳特性的Paris公式材料常数;碳纤维、玻璃纤维复合材料胶接修复铝合金裂纹板的材料常数C、m分别为6.76×10-10、2.27和7.89×10-10、2.33。     

聚溴化苯乙烯阻燃聚乙烯热解动力学研究

用聚溴化苯乙烯作为阻燃剂,制备了阻燃聚乙烯（PE）,利用TG方法研究了PE和阻燃PE在氮气气氛下的热解动力学行为,并用改进的非等温动力学方法研究了其热解动力学。结果表明,加入阻燃剂后材料的初始分解温度提前,阻燃材料的热解区间变宽,阻燃体系的平均失重速率下降,最大失重速率下降,主要分解阶段的残炭率高于未阻燃PE,聚溴化苯乙烯阻燃效果明显,可用于聚乙烯阻燃,说明大分子溴系阻燃剂具有较好的发展潜力。氮气气氛下未阻燃聚乙烯的热解过程只存在一个失重阶段,而阻燃材料在相同温度范围内呈现不同的失重阶段,且在各失重阶段其反应机理函数也发生变化;活化能、指前因子都有所不同,阻燃材料的活化能大于未阻燃材料,且活化能在整个失重阶段是随着温度和转化率的变化而变化的,说明阻燃剂的加入改变了材料的热解行为。     

先驱体转化致密SiC纳米复合材料的制备及其热电性能

以聚碳硅烷和锑改性聚硅烷为先驱体,利用先驱体转化SiC材料的富余自由碳高温石墨化的微观结构演变特点,采用热压烧结、先驱体浸渍—裂解法以及退火工艺制备出先驱体转化SiC纳米复合材料。采用SEM、TEM、XRD和Raman等测试手段表征和分析了相组成和微观结构,讨论了样品的热导率、电导率和塞贝克系数等热电参数随温度变化关系。研究表明,所得致密SiC纳米复合材料为n型热电材料。由于纳米石墨的作用,材料热导率抑制在4–8W/(m?K)范围。1600°C退火处理能够降低热导率,同时提高电导率和塞贝克系数绝对值,使先驱体转化法得到的SiC纳米复合材料无量纲热电优值ZT达到0.0028（650°C）,高于其他已报道的致密SiC/C复合材料和纳米复合材料体系。     

奇型偏微分方程的柯西问题

定解条件给在奇线上的偏微分方程的各种定解问题早已有研究^[1～4],多数作者使用了特殊函数作工具。本文用能量不等式组来解决一类奇型双曲型方程的柯西问题。 本文主要讨论如下问题解尚存在唯一性： Lu≡[(t^a/2?_t-λ₁(x,t)?_x)(t^a/2?_t-λ₂(x,t) ?_x)+a(x,t)?_t+b(x,t)?_x+c(x,t)]u(x,t)=f(x,t) (x,t)∈R×(0,T] u∣_t=0=φ(x),limt^a/2u_t=ψ(x) 这是一个二阶偏微分方程,当 α>0时,?_t²的系数当t=O 时变为零,因而这是一个初始值给在奇线上的柯西问题。我们假定： (A) α为常数,0<α<1;所涉及的都是实函数; (B) α(x,t),b(x,t),c(x,t),λ_j(x,t)(j=1,2)∈C¹([0,T],C²(R)),且上述函数的所有可能的导数都有界; (C) φ(x),ψ(x)∈C₀⁴(R)); （D）f(x,t)∈C((0,T],C₀²(R)),且sup{t^a/2(∣f∣+∣f_x∣+∣f_xx∣}＜+∞（Ⅱ） (E)存在常数δ＞0,使当（x,t)∈R×[0,T]时,有：∣λ₁(x,t)-λ₂(x,t)∣≥δ条件（Ⅱ）中关于实函数的假设不是必要的,作此假设仅为方便。本文主要得到：定理1：在（Ⅱ）的假设下,（Ⅰ）存在唯一弱解u,并 u∈C([0,T),H¹(R))∩C¹((0,T),L₂(R)).为证明该定理作了一系列准备,关键是证得引理1,引理2和引理6。     

新体制导航信号下I/Q幅相不一致对接收机测距零值的影响分析

随着现代化导航信号带宽的增大,由于可以大幅降低采样率,复信号采样的优势日趋明显。由于存在I/Q幅相误差,复信号采样对导航接收机伪距测量造成了一定影响。改进了信道非理想与I/Q幅相误差共同影响BPSK/QPSK信号零值测量的分析模型;在该模型基础上,推导得到了任意I/Q误差和信道非理想特性影响BOC信号伪距零值的模型;探讨了二者在频域抗干扰应用场景下引起的零值变化;理论分析与软件接收机仿真结果高度吻合,误差在1.5×10^-4码片内,证明了分析模型的精确性。该分析方法可用于对高性能导航接收机信道特性进行事先约束及筛选,以确保干扰场景下的零值变化满足要求。     

2014—2016年FY-3C与COSMIC掩星电离层特征参数的比较

利用由FY-3C和COSMIC两个全球导航卫星系统无线电掩星任务提供的2014—2016共3年的电离层电子密度廓线,基于时间间隔7.5 min、经纬度间隔2.5°的时空匹配窗口,对两个掩星任务的电离层峰值密度（NmF2）和峰值高度（hmF2）进行了比较。结果表明：由两个任务得到的特征参数相关性良好,各年之间相关性水平基本稳定,其中各年NmF2和hmF2相关系数的平均值分别为0.87和0.75;FY-3C的特征参数相对于COSMIC的偏差很小,各年NmF2的绝对偏差均值和相对偏差均值分别不超过±0.25×10⁵ el/cm³和±15.0%,hmF2的绝对偏差均值和相对偏差均值分别不超过±7.00 km和±1.80%。此外,由两个任务得到的特征参数在空间上均表现出赤道及低纬地区数值较高且呈“条带状”分布的特点,且两个任务都监测到了2016年相对于2014年和2015年NmF2和 hmF2均存在显著下降的现象     

Putin – the masked nemesis of the strategy of ambiguity

Recent events demonstrate the complex and adaptive approach employed by Russia to reassert influence in Europe. The changing face of Russia’s strategy commenced in 2007 when it launched a crippling cyber-attack against Estonia. This was followed by a large Russian conventional attack against Georgia in 2008, occupying two large areas of the nation. 2014 witnessed the Russian annexation of Crimea where in just a week, Russia seized control of Crimea “without firing a shot.” The annexation of Crimea was rapidly followed by a Russian inspired and led subversive war in eastern Ukraine. The common thread among these diverse Russian operations is its use of ambiguity to confound and confuse decision makers in the West.     

India's counter-insurgency experience: the ‘trust and nurture’ strategy

The Indian Army, a force trained primarily for conventional warfare, has been engaged in internal counter-insurgency operations since the 1950s. Despite such a long innings on a counter-insurgency mode, little attention has been accorded within military circles to doctrinal innovation for waging sub-conventional warfare in India's democratic political context. At best, the Army continues to view counter-insurgency duty as secondary to its primary duty of defending India from external conventional threats. By conceptualizing a counter-insurgency strategy of ‘trust and nurture’, this article aims to fill this critical doctrinal gap in India's military policy. The author argues that a counter-insurgency strategy of ‘trust and nurture’ based on democratic political culture, measured military methods, special counter-insurgency forces, local social and cultural awareness and an integrative nation-building approach will result in positive handling of India's internal security problems. The author utilizes India's counter-insurgency experiences in Assam, Mizoram, Nagaland, Punjab, and Operation ‘Sadhbhavana’ in Jammu and Kashmir as illustrative empirical indicants in order to validate the ‘trust and nurture’ strategy.     

Helping hands: civil–military cooperation and Italy's military operation abroad

In the Post-Bipolar Era the growing complexity of the military operations requires a new approach for the resolution of international crises. Since the end of the Cold War, peace support operations (PSO) have become the mainstay and principal occupation of most Western armies. At the same time, Italy has been one of the most important actors in such an area. The article focuses on the cooperation between military and civil components (a process called CIMIC) as a key variable in the Italian PSOs. We will analyse in detail the main lessons learned from past military interventions as well as the general context in which new tendencies are taking place. The maintaining of a minimum security frame becomes essential to fulfil activities ‘collateral’ to the mission: reconstructing services and infrastructure, food distribution, water and medication, law and order, de-mining, training of local forces, and supporting local institutions. These are the main tasks to obtain thrust and support from the population.     

Terrorism,insurgency, kidnapping,and security in Africa's energy sector

Energy continues to serve as the bedrock of modern economies and the main driver of modern society. For Africa, the production and supply of energy resources such as crude oil, natural gas, uranium, coal, biomass, biofuels and other renewables are an important source of employment, rents, taxes, royalties and profits. This sector brings in several tens of billions of dollars of revenue annually. The production and delivery of such resources, however, depend on critical infrastructures such as pipelines, refineries, processing plants, terminals, rigs, electrical energy pylons, substations, pump stations, vessels, and tankers. These infrastructures have been attacked by terrorists, insurgents, vandals and saboteurs, all of whom see them as targets against which to register their grievances and extract concessions from the state. This paper is a chronological account of some of the documented incidents of terrorism, insurgency, kidnapping, destruction, sabotage, and human casualties suffered in the oil and gas sectors in Africa between 1999 and 2012. It is based on data extracted from the databases of the RAND Database of World Terrorism Incidents and the University of Maryland's Global Terrorism Database (GTD).     

Tacit support for terrorism: The rapprochement between the USSR and Palestinian guerrilla organizations following the 1967 war

This article demonstrates the inconsistent and wavering Soviet attitude towards national liberation movements in general and the Palestinian organizations in particular. Until the late 1960s, the Soviets viewed these organizations with suspicion, hesitating to engage in political dialogue with them. However, in the 1970s, political and military events in the region, as well as modifications in the Kremlin's Cold War strategies, led to a general shift towards the Middle East in Soviet foreign policy. Soviet leaders showed increased willingness to provide certain Palestinian organizations with arms with which to conduct terrorist activities against Israeli, pro-Israeli, Jewish and Western targets. The article explores the complex relations between Palestinian organizations and the USSR in the field of international terror. The study also exposes and analyzes the nature and content of Soviet–Palestinian arms dialogues and transactions. It provides clear evidence that Soviet policymakers and other luminaries were fully informed of, and sometimes directly involved in, these transactions and dialogues at the highest levels.     

A1 Qaeda and the radical Islamic challenge to western strategy

The September 11 global crisis prompted by the attacks on the World Trade Center and the Pentagon raises major questions concerning the nature and trajectory of terrorism in the post-Cold War global order. Hitherto, terrorism has been largely debated by analysts at the level of nation states. Terrorist and insurgent movements have also been largely anchored in nationalist and ethnic power bases even when they have sought to mobilise a transnational ideological appeal on religious or class grounds. There have been a few exceptions to this pattern such as the alliance between the German Baader-Meinhof group and the Japanese Red Army Faction, but even such international alliances as this did not, until at least the 1980s, presage anything like a global terrorist network necessitating a global strategic response. This study examines terrorism and global strategic responses.     

Helping hands: external support for the KNU insurgency in Burma

This article analyses to what extent the Burmese KNU insurgency made use of external support from states, refugees, and diasporas. Based on extensive fieldwork it is concluded that support from neighbouring states and refugees has for years kept the Karen rebellion alive. Western countries perceived forms of resistance to the illegitimate Burmese regime as just and have therefore played a crucial role in the continuation of conflict in Karen State. It is important that policymakers and donors as well as executing organizations continue to reflect critically on the way they exercise their work.     

Reviews

Douglas S. Derrer, We Are All the Target: A Handbook of Terrorism Avoidance and Hostage Survival. Annapolis, MD: US Naval Institute Press, 1992. Pp. x+135, notes, index. $14.95. ISBN 01–55750–150–5

Ian Knight, Zulu: Isandlwana and Rorke's Drift, 22–23 January 1879. London: Windrow & Greene, 1992. Pp.136, 150 illus., incl 8 colour plates, maps, biblio. £35. ISBN 1–872004–23–7

Ian Knight, By the Orders of the Great White Queen: Campaigning in Zululand through the Eyes of the British Soldiers, 1879. London: Greenhill Books and Novato: Presidio Press, 1992. Pp. 272, 17 illus., 1 map. £18.95. ISBN 1–85367–122–3

Manfried Rauchensteiner and Erwin A. Schmidl (eds.), Formen des Krieges: vom Mittelalter zum ‘Low‐intensity’ Conflict’. Graz : Verlag Styria, 1991. Pp.208. DM35. ISBN 3–22–12139–7

Harold J. Kearsley, Maritime Power and the Twenty‐First Century. Dartmouth: Dartmouth Publishing Company, Limited, 1992. Pp.xv + 203, 13 diagrams, index. £32.50. ISBN 1–85521–288–9     

基于GTST-DMLD-ESD的装备RMS建模仿真

装备的RMS是装备的重要设计参数,是影响战备完好和保障能力的关键因素.引入GTST-DMLD作为主要建模工具,建立起装备系统的RMS描述模型,以ESD为补充和扩展,对维修过程进行建模.并以GTST-DMLD-ESD模型作为装备RMS仿真的核心,对装备RMS仿真模型的总体框架进行了研究,并对各模块进行了较为详细的探讨.