考虑单群缓发中子时中子增殖的统一公式

迄今为止,人们只分别导出了深度次临界、缓发临界附近和瞬发超临界的几个特定条件下的中子增殖公式,各公式都不具有通用性,使用很不便.文中导出了反应性阶跃变化时,只考虑单群缓发中子从深度次临界直到缓发超临界整个区间上的中子增殖统一公式.实例计算表明,该公式计算准确,实用性强,具有重要的理论意义与应用价值.     

Nonparametric estimation of some quantities of interest from renewal theory

In this paper, confidence intervals are given for two quantities of importance related to renewal processes. For each quantity, two confidence intervals are discussed. One confidence interval is given for general, all‐purpose use. Another confidence interval is given which is easier to compute, but not of general use. The case where data are subject to right censorship is also considered. Some numerical comparisons are made. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 638–649, 2003.     

A generalization of the entropy model for brand purchase behavior

Hemiter's entropy model for brand purchase behavior has been generalized for Renyi's measure of entropy which is a more general concept than Shannon's measure of entropy used by Herniter and which includes Shannon's measure as a limiting case. The generalized model considered here is more flexible than Herniter's model since it can give different marketing statistics for different products and it can give these statistics even when only some of the brands are considered.     

A unifying treatment of replacement policies with minimal repair

This article presents the mathematical background for analyzing maintenance policies with minimal repair. Standard maintenance policies are summarized. A general failure model is introduced which allows a unifying treatment of more recent maintenance policies with minimal repair. In particular, repair cost limit maintenance policies are considered. © 1993 John Wiley & Sons, Inc.     

Interrelationships between performance measures for the machine-repairman problem

The machine-repairman problem with heterogeneous machines and multiple repairmen is considered. It is assumed that machine up times and repair times have general distributions, and a work-conserving service discipline is employed. Under these general assumptions, steady-state relationships between performance measures are examined for the individual machines. Also, various performance measures are defined for the aggregate system and interrelationships between these measures are established.     

使用三个数域的数域筛算法

大整数分解难题是RSA密码的数学安全基础.目前数域筛算法是分解365比特以上大整数的最有效方法,然而它的时间复杂度仍然是亚指数的.对于目前普遍使用的1024比特以上大整数,数域筛算法还不能分解,所以研究数域筛算法具有重要的意义.现有的一般数域筛算法普遍使用两个数域,对多个数域的研究极少.一般数域筛算法经过修改可以使用三个数域,即两个代数数域和一个有理数域.分析表明:修改后的数域筛算法与原来的一般数域筛算法在时间复杂度上处于同一量级.但修改后的数域筛算法有更多地方可以合并计算,所以计算速度更快了.通过两个实验也验证了这一结论.     

Opportunity-based age replacement: Exponentially distributed times between opportunities

This article gives a full analysis of a component-replacement model in which preventive replacements are only possible at maintenance opportunities. These opportunities arise according to a Poisson process, independently of failures of the component. Conditions for the existence of a unique average optimal control limit policy are established and an equation characterizing the optimal policy and minimal average costs is derived. An important result is that the optimal policy can be described as a so-called one-opportunity-look-ahead policy. Such policies play an important role as heuristics in more general models. It is shown that there is a correspondence with the well-known age-replacement model, which can be considered as an extreme case of the model. Finally, some numerical results are given.     

A class of continuous nonlinear programming problems with time-delayed constraints

A general class of continuous time nonlinear problems is considered. Necessary and sufficient conditions for the existence of solutions are established and optimal solutions are characterized in terms of a duality theorem. The theory is illustrated by means of an example.     

Flowshop sequencing problem with ordered processing time matrices: A general case

The ordered matrix flow shop problem with no passing of jobs is considered. In an earlier paper, the authors have considered a special case of the problem and have proposed a simple and efficient algorithm that finds a sequence with minimum makespan for a special problem. This paper considers a more general case. This technique is shown to be considerably more efficient than are existing methods for the conventional flow shop problems.     

Preservation of unimodality under shock models

A number of results pertaining to preservation of aging properties (IFR, IFRA etc.) under various shock models are available in the literature. Our aim in this paper is to examine in the same spirit, the preservation of unimodality under various shock models. For example, it is proved that in a non-homogeneous Poisson shock model if {p_k}_K≥0, the sequence of probabilities with which the device fails on the kth shock, is unimodal then under some suitable conditions on the mean value function Λ (t), the corresponding survival function is also unimodal. The other shock models under which the preservation of unimodality is considered in this paper are pure birth shock model and a more general shock model in which shocks occur according to a general counting process. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 952–957, 1999     

A nonidentical parallel processor scheduling problem

The problem considered in this article is a generalization of the familiar makespan problem, in which n jobs are allocated among m parallel processors, so as to minimize the maximum time (or cost) on any processor. Our problem is more general, in that we allow the processors to have (a) different initial costs, (b) different utilization levels before new costs are incurred, and (c) different rates of cost increase. A heuristic adapted from the bin-packing problem is shown to provide solutions which are close to optimal as the number of iterations is allowed to increase. Computational testing, over a large number of randomly generated problem instances, suggests that heuristic errors are, on average, very small.     

Designing acceptance sampling schemes for life testing with mixed censoring

Mixed censoring is useful extension of Type I and Type II censoring and combines some advantages of both types of censoring. This paper proposes a general Bayesian framework for designing a variable acceptance sampling scheme with mixed censoring. A general loss function which includes the sampling cost, the time‐consuming cost, the salvage value, and the decision loss is employed to determine the Bayes risk and the corresponding optimal sampling plan. An explicit expression of the Bayes risk is derived. The new model can easily be adapted to create life testing models for different distributions. Specifically, two commonly used distributions including the exponential distribution and the Weibull distribution are considered with a special decision loss function. We demonstrate that the proposed model is superior to models with Type I or Type II censoring. Numerical examples are reported to illustrate the effectiveness of the method proposed. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Computerized scheduling of seagoing tankers

Computerized Scheduling of Seagoing Tankers The tanker scheduling problem considered in this paper is that of the Defense Fuel Supply Center (DFSC) and the Military Sealift Command (MSC) in the worldwide distribution of bulk petroleum products. Routes and cargoes which meet delivery schedule dates for a multiplicity of product requirements at minimum cost are to be determined for a fleet of tankers. A general mathematical programming model is presented, and then a mixed integer model is developed which attempts to reflect the true scheduling task of DFSC and MSC as closely as possible. The problem is kept to within a workable size by the systematic construction of a set of tanker routes which does not contain many possible routes that can be judged unacceptable from practical considerations alone.     

Recurrence relations between moments of order statistics

A general result for obtaining recurrence relations between single moments of order statistics is obtained and has been used to establish the recurrence relations between moments of some doubly truncated distributions. The examples considered are Weibull, exponential, Pareto, power function, Cauchy, and logistic. Recurrence relations are also obtained for nontruncated gamma and beta distributions.     

Product commonality in multiple‐period,make‐to‐stock systems

It is well known that replacing several products by a single common product can reduce required safety stock levels due to the benefits of risk pooling. Recent research utilizing single‐period models has investigated the cost savings (or losses) from doing so. This paper uses a very general multiple‐period model, with general demand distributions, any number of products, and the objective of minimizing production, holding, and shortage costs. Two scenarios are considered—one that utilizes a common product and one that does not. Prior results utilizing single‐period models indicate that even if the common product is more expensive than the products it replaces, there are many circumstances under which it is still worthwhile to employ. Surprisingly, this paper will show that this is almost never the case in a multiple‐period model. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 737–751, 1999     

关于圆柱壳在水下爆炸冲击波作用下二次加载现象的数值模拟研究

运用大型商业有限元程序MSC.DYTRAN数值模拟了水下爆炸冲击波载荷作用下自由环肋圆柱壳的非线性动态响应.采用一般耦合算法(generalcoupling)模拟流体与结构的耦合效应,计算中考虑了材料的应变率强化效应,几何非线性的影响,分析了空穴现象的产生和二次加载对结构响应的影响.仿真结果表明,相同工况和厚度下的无限自由平板和自由环肋圆柱壳,后者的空化时间比前者长,而壳体运动的最大速度后者比前者低.     

Optimal assembly of systems using schur functions and majorization

A general assembly of n systems from k types of components is considered. The techniques of majorization and Schur function are utilized to pinpoint the optimal assembly under several criteria. Earlier results of Derman. Leiberman, and Ross [2] and El-Neweihi, Proschan, and Sethuraman [3] are generalized.     

The optimal burn-in testing of repairable equipment

The subject of this paper is the utilization of the “infant mortality” or decreasing failure rate effect to improve the reliability of repairable devices. Decreasing failure rate implies the possibility that devices which exhibit it can be improved by “burn-in testing” of each unit. Such a test serves to accumulate operating time while shielded from the full costs and consequences of failure. A general formulation of the burn-in test decision for repairable devices is presented and some special cases are solved. A class of models, indexed by the degree of partial replacement present in the repair process, is considered and numerical results for the optimal policy are given for several members of that class. A comparison of those results reveals the profitability of testing increases with the complexity of the repairable device.     

Scheduling on M parallel machines subject to random breakdowns to minimize expected mean flow time

The problem of scheduling n jobs on m parallel machines is considered when the machines are subject to random breakdowns and job processing times are random variables. An objective function of mean flow time is developed for a general parallel machine system, and an expression of its expected value is derived. The problem is transformed into a deterministic unrelated parallel machine scheduling model with modified processing times when the number of breakdowns is modeled as a generalized Poisson process. © 1994 John Wiley & Sons, Inc.     

A two-echelon inventory model with purchases,dispositions, shipments,returns and transshipments

This paper presents a one-period two-echelon inventory model with one warehouse in the first echelon and n warehouses in the second echelon. At the beginning of the period the stock levels at all facilities are adjusted by purchasing or disposing of items at the first echelon, returning or shipping items between the echelons and transshipping items within the second echelon. During the period, demands (which may be negative) are placed on all warehouses in the second echelon and an attempt is made to satisfy shortages either by an expedited shipment from the first echelon to the second echelon or an expedited transshipment within the second echelon. The decision problem is to choose an initial stock level at the first echelon (by a purchase or a disposition) and an initial allocation so as to minimize the initial stock movement costs during the period plus inventory carrying costs and system shortage costs at the end of the period. It is shown that the objective function takes on one of four forms, depending on the relative magnitudes of the various shipping costs. All four forms of the objective function are derived and proven to be convex. Several applications of this general model are considered. We also consider multi-period extensions of the general model and an important special case is solved explicitly.